FORUM LIGHTING SPA-33931 Wall Light Pegasi Ingot Shield Instructions
- July 27, 2024
- Forum Lighting
Table of Contents
FORUM LIGHTING SPA-33931 Wall Light Pegasi Ingot Shield
Instructions
Please take time to read this leaflet carefully and retain it for future reference.
Spa
- Version: v2
Assembly Steps
- Insert screws (2) through the mounting holes in the backplate (1).
- Secure the backplate (1) to the wall using the screws (3) and wall plugs (4).
- Connect the wires to the terminal block (5) as shown in the diagram. Ensure that the Live (L) and Neutral (N) wires are correctly connected.
- Attach the cover (6) to the backplate (1).
- Insert the bulb (8) into the socket (7).
- Secure the bulb (8) by rotating it clockwise.
- Attach the shade (9) to the fixture.
- Secure the shade (9) with the screw (10).
Diagram Description
The diagram illustrates the following components and their assembly sequence:
- (1) Backplate
- (2) Screws for mounting
- (3) Screws for securing backplate
- (4) Wall plugs
- (5) Terminal block for wire connections
- (6) Cover
- (7) Socket for bulb
- (8) Bulb
- (9) Shade
- (10) Screw for securing shade
Specifications
Component | Description |
---|---|
Backplate | The base for mounting the fixture to the wall |
Screws | Used for securing the backplate and shade |
Wall Plugs | Used for securing screws in the wall |
Terminal Block | For connecting electrical wires |
Cover | Protective cover for the backplate |
Socket | Holder for the bulb |
Bulb | Light source |
Shade | Decorative cover for the bulb |
FAQ
Q: What should I do if the light does not turn on after assembly?
A: Ensure that the wires are correctly connected to the terminal block and that the bulb is properly inserted and secured.
Q: Can I use a different type of bulb with this fixture?
A: Refer to the manufacturer's specifications for compatible bulb types.
Q: How do I clean the fixture?
A: Use a soft, dry cloth to clean the fixture. Avoid using harsh chemicals or abrasive materials.
Q: Is it safe to install this fixture in a bathroom?
A: Check the fixture's IP rating and consult local electrical codes to ensure it is suitable for bathroom installation.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>