Light4me DECO 18 LED Bar Decorative Beam Strip User Manual

Light4me DECO 18 LED Bar Decorative Beam Strip

Specifications

• Brand: LIGHT4ME
• Model: LED BAR DECO 18
• Channels: 3CH/7CH/13CH
• Color Mixing: RGB

Product Usage Instructions

Safety Guidelines
Before using the device, carefully read the user manual for safety instructions and guidelines. Keep the manual for future reference.

Installation
Ensure the housing of the device is not damaged before use. Do not install the device on a surface prone to vibrations or expose it to high temperatures.

Initial Setup
Upon first powering on the device, it may emit smoke and a distinct odour. This is a normal occurrence and does not indicate a defect in the product.

Maintenance
Regularly inspect and clean the device to ensure optimal performance and longevity.

Functionality Overview
The LED BAR DECO 18 offers various functions including colour mixing, strobe speed adjustment, auto mode, sound control, and DMX operation with different channel options.

Safety rules

****| Please read the user manual in detail before use. Please also keep it for future reference.

The manual contains rules for the safe use of the device.

---|---
****| After receiving the product, please unpack and check whether it is complete and whether

there is any damage caused by transportation. If there is damage caused by transportation, please do not use this product and contact the dealer or manufacturer as soon as possible.

| WARNING! THE DEVICE MUST NOT BE DISPOSED OF WITH HOUSEHOLD WASTE.

This symbol indicates that this product must not be disposed of with household waste, ac- cording to the EU and your national law. In order to prevent potential damage to the environ- ment or health, the used product must be recycled. In accordance with current legislation, unusable electrical and electronic devices must be collected separately at the designated

facilities for recycling, acting on the basis of applicable environmental standards.

| The product described in this manual comply with European directives and it is therefore CE marked.
| Keep the device away from children and unqualified persons. The manufacturer is not liable for damage caused by improper use.
| Before use, make sure the housing is not damaged.
  | Ensure a minimum distance of 0.5 m between the appliance and flammable materials.

The distance between the product and the illuminated flammable materials need to be more than 10 meters!

****| The device operates on the specified power supply – do not connect to a power supply with different parameters. Disconnect the product from the power supply by pulling on the power plug – do not pull directly on the power cord! Disconnect the device from the power supply before removing the housing or performing maintenance. If you find the power cord is dam-

aged – do not use it!

****| Indoor and outdoor device, use in a well-ventilated room, keep away from moisture. The dis- tance between the device and a wall should be kept at least 50 cm. Do not expose the prod- uct to direct sunlight or other lighting devices. Do not store or use the device near a fire

source!

| Do not install the device on a surface subjected to vibration. Do not expose the device to high temperatures!
| Always transport the product by holding the brackets. Do not transport the product by hold- ing arm or body.
****| In the event of a malfunction, disconnect the device from the power supply immediately! It is advisable to wear the necessary protective equipment when using the device, especially

glasses, gloves.

| Do not turn on or off the lamp repeatedly within a short period of time, as this will shorten the life of the light source and/or other electrical components!
| Under normal operating conditions at room temperature, the temperature of the metal hous- ing of the product may reach a maximum of 50°C – be careful and don’t touch the housing

with bare hands!

****| When the appliance is first switched on, smoke and a characteristic odor may be emitted – this is normal occurrence and it does not indicate that the product is defective.

Device maintenance

1. The device may only be used by qualified personnel, damage caused by improper use or attempted repair is not covered by the warranty. There are no service parts inside the packaging, repairs may only be carried out by authorized service center.
2. Do not allow optical components to come into contact with oil, grease or any similar liquid. Optical components should not come into direct contact with the skin!
3. Regular cleaning allows of long term use and maintains proper brightness. Use a soft cloth to clean the optical system. Also clean the fans and air vents.

Technical specification

• Light source: 18x3W RGB
• Power supply: AC 100-240V, 50/60 Hz
• Power consumption: 60W
• Fuse: 3A/250V
• Sections : 3 by 6 lenses
• Operation modes: auto, sound, master-slave, DMX DMX channel modes: 3, 7, 13
• Bar dimensions: 6 x 6 x 100 cm
• Packaging dimensions : 10 x 10 x 110 cm
• Gross weight: 2.2 kg

Menu structure

COLO

| r000-r255| Red color dimmer – 0-100%
G000-G255| Green color dimmer – 0-100%
B000-B255| Blue color dimmer – 0-100%
d001-d512| –| DMX Mode
–| 3CH/7CH/13CH| Select channels

DMX mode – 3 channels

Channel| Function| Values| Description
CH1| Dimmer red| 0-255| 0-100%
CH2| Dimmer green| 0-255| 0-100%
CH3| Dimmer blue| 0-255| 0-100%
DMX mode – 7 channels

Channels| Function| Value| Remark
CH1| Master Dimmer| 0-255| 0-100%
CH2| Dimmer red| 0-255| 0-100%
CH3| Dimmer green| 0-255| 0-100%
CH4| Dimmer blue| 0-255| 0-100%
CH5| Strobe dimming| 0-255| 0-100%

CH6

| ****

Mode

| 0-9| Manual dimming
10-249| In-built effect
250-255| Sound-activated
CH7| CH6 speed| 0-255| Slow-fast
DMX mode – 13 channels

Channels| Function| Value| Description
CH1| Dimmer red 1| 0-255| 0-100%
CH2| Dimmer green 1| 0-255| 0-100%
CH3| Dimmer blue 1| 0-255| 0-100%
CH4| Dimmer red 2| 0-255| 0-100%
CH5| Dimmer green 2| 0-255| 0-100%
CH6| Dimmer blue 2| 0-255| 0-100%
CH7| Dimmer red 3| 0-255| 0-100%
CH8| Dimmer green 3| 0-255| 0-100%
CH9| Dimmer blue 3| 0-255| 0-100%
CH10| No function| 0-255| –
CH11| Strobe| 0-255| Slow-fast

CH12

| ****

Mode

| 0-9| Manual dimming
10-249| In-built effect
250-255| Sound-activated
CH13| CH12 speed| 0-255| Slow-fast

Information about used electrical and electronic equipment
The main goal of European and national law regulations is to reduce the amount of waste produced from used electrical and electronic equipment, to ensure an appropriate level of collection, recovery and recycling of used equipment, and to increase public awareness of its harmfulness to the environ-ment, at each stage of use of electrical and electronic equipment. Therefore, it should be pointed out that households play a key role in contributing to reuse and recovery, including recycling of used equip-ment. The user of electrical and electronic equipment – intended for households – is obliged to return it to authorized collector after its use. However, it should be remembered that products classified as electrical or electronic equipment should be disposed of at authorized collection points.

FAQ

• Q: What should I do if there is damage to the product during transportation?
  • A: If you notice any damage to the product upon receipt, refrain from using it and immediately contact the dealer or manufacturer for assistance.
• Q: What do I do if the device emits smoke and odour upon initial use?
  • A: The emission of smoke and odour upon initial use is a normal phenomenon and does not indicate a defect. Allow the device to operate normally as it settles in.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>