LIGHT4ME RGBW Muziker LED Spider Mkii Turbo User Manual
- July 13, 2024
- LIGHT4ME
Table of Contents
LIGHT4ME RGBW Muziker LED Spider Mkii Turbo
Packaging Contents
Before unpacking the device, ensure that the packaging is undamaged and contains the following items:
- light effect;
- user manual;
- power cable;
- mounting bracket.
Safety Rules
| Please read the user manual in detail before use. Please also keep it for
future reference. The man- ual contains rules for the safe use of the device.
---|---
| WARNING! THE DEVICE MUST NOT BE DISPOSED OF WITH HOUSEHOLD WASTE. This
symbol indicates that this product must not be disposed of with household
waste, according to the EU and your national law. In order to prevent
potential damage to the environment or health, the used product must be
recycled. In accordance with current legislation, unusable electrical and
electronic devices must be collected separately at the designated facilities
for recycling, acting on the basis of applicable environmental standards.
| The product described in this manual comply with European directives and it
is therefore CE marked.
| Keep the device away from children and unqualified persons. The manufacturer
is not liable for dam- age caused by improper use.
| Before use, make sure the housing is not damaged and movements are fully
functional.
| Ensure a minimum distance of 0.5 m between the appliance and flammable
materials.
| The device operates on the power supply of 90-240V, 50/60Hz – do not connect
to a power supply with different parameters. Disconnect the device from the
power supply before removing the housing or performing maintenance.
| Indoor device, keep away from moisture. Do not expose the product to direct
sunlight or other lighting devices.
| Do not look directly into the light source – the light may cause an
epileptic attack in light-sensitive people or people with epilepsy. Compliance
with this rule is mandatory.
| Do not install the device on a surface subjected to vibration.
| **** When the device is hanged, attach the safety rope to a suitable
mounting point.
Device Maintenance
- The device may only be used by qualified personnel, damage caused by improper use or attempted repair is not covered by the warranty. There are no service parts inside the packaging, repairs may only be carried out by authorized service center.
- Do not allow light source to come into contact with oil, grease or any similar liquid.
- Regular cleaning allows of long term use and maintains proper brightness. Use a soft cloth to clean the light source.
Menu Structure
Menu option | Values | Function |
---|---|---|
Addr | A001-A512 | DMX address setting |
CHNd | 15CH | 15-channel DMX mode |
7CH | 7-channel DMX mode | |
Slnd | SLAv | Master/slave mode – slave device |
MAST | Master/slave mode – master device | |
SoUn | Master/slave mode – sound control | |
Shnd | Sh01-Sh24 | Auto mode programs |
SPED | Program speed – slow-fast (01-08) | |
SoUd | ON | Tryb sound – ON |
OFF | Tryb sound – OFF | |
SoEn | 001-100 | Microphone sensitivity in sound mode – low-high |
teSt | YES | Automatic test |
dISP | NO | Default display position |
YES | Reversed display position | |
Led | ON | LED backlighting – ON |
OFF | LED backlighting – OFF | |
1tiL | NO | Default TILT1 movements |
YES | Reversed TILT1 movements | |
2tiL | NO | Default TILT2 movements |
YES | Reversed TILT2 movements | |
DEFT | NO | Cancel restoring default settings |
YES | Restore default settings |
DMX Structure
7-channel mode – 7CH
Channel| Function name| Range| DMX min. value| DMX max. value
CH1| Tilt1| Tilt1 movements control| 0| 255
CH2| Tilt2| Tilt2 movements control| 0| 255
CH3| Master Dimmer| 0-100%| 0| 255
CH4| Strobe| No function| 0| 9
| | Strobe – slow-fast| 10| 255
CH5| Effects| No function| 0| 7
| | Effect 1| 8| 17
| | Effect 2| 18| 27
| | Effect 3| 28| 37
| | Effect 4| 38| 47
| | Effect 5| 48| 57
| | Effect 6| 58| 67
| | Effect 7| 68| 77
| | Effect 8| 78| 87
| | Effect 9| 88| 97
| | Effect 10| 98| 107
| | Effect 11| 108| 117
| | Effect 12| 118| 127
| | Effect 13| 128| 136
| | Effect 14| 137| 146
| | Effect 15| 147| 156
| | Effect 16| 157| 166
| | Effect 17| 167| 176
| | Effect 18| 177| 186
| | Effect 19| 187| 196
| | Effect 20| 197| 206
| | Effect 21| 207| 216
| | Effect 22| 217| 226
| | Effect 23| 227| 236
| | Effect 24 – automatic multief- fects| 237| 246
| | Effect 25 – sound mode| 247| 255
CH6| CH5 channel speed| Slow-fast| 0| 255
CH7| Reset| Reset after 5 sec.| 241| 250
15-channel mode – 15CH
Channel| Function name| Range| DMX min.
value
| DMX max.
value
---|---|---|---|---
CH1| Tilt1| Tilt1 movements control| 0| 255
CH2| Tilt2| Tilt2 movements control| 0| 255
CH3| Master Dimmer| 0-100%| 0| 255
CH4| Strobe| No function| 0| 9
| | Strobe – slow-fast| 10| 255
CH5| Dimmer LED1| 0-100%| 0| 255
CH6| Dimmer LED2| 0-100%| 0| 255
CH7| Dimmer LED3| 0-100%| 0| 255
CH8| Dimmer LED4| 0-100%| 0| 255
CH9| Dimmer LED5| 0-100%| 0| 255
CH10| Dimmer LED6| 0-100%| 0| 255
CH11| Dimmer LED7| 0-100%| 0| 255
CH12| Dimmer LED8| 0-100%| 0| 255
CH13| Effects| No function| 0| 7
| | Effect 1| 8| 17
| | Effect 2| 18| 27
| | Effect 3| 28| 37
| | Effect 4| 38| 47
| | Effect 5| 48| 57
| | Effect 6| 58| 67
| | Effect 7| 68| 77
| | Effect 8| 78| 87
| | Effect 9| 88| 97
| | Effect 10| 98| 107
| | Effect 11| 108| 117
| | Effect 12| 118| 127
| | Effect 13| 128| 136
| | Effect 14| 137| 146
| | Effect 15| 147| 156
| | Effect 16| 157| 166
| | Effect 17| 167| 176
| | Effect 18| 177| 186
| | Effect 19| 187| 196
| | Effect 20| 197| 206
| | Effect 21| 207| 216
| | Effect 22| 217| 226
| | Effect 23| 227| 236
| | Effect 24 – automatic multief- fects| 237| 246
| | Effect 25 – sound mode| 247| 255
CH14| CH13 channel speed| Slow-fast| 0| 255
CH15| Reset| Reset after 5 sec.| 241| 250
Technical Specification
Power supply: AC 90-240V, 50/60 Hz
Power consumption : 40W
Light source : 8x3W LEDs (4in1, 2xRGBW)
Operation modes: auto, sound, master/slave, DMX512
DMX channels: 7/15
Display: digital
Strobe rate: 0-20 Hz
Device dimensions: 28x12x15 cm
Weight: 2.1 kg
Original packaging and filling.
Information about used electrical and electronic equipment
The main goal of European and national law regulations is to reduce the amount
of waste produced
from used electrical and electronic equipment, to ensure an appropriate level
of collection, recovery
and recycling of used equipment, and to increase public awareness of its
harmfulness to the environment, at each stage of use of electrical and
electronic equipment. Therefore, it should be pointed out that households play
a key role in contributing to reuse and recovery, including recycling of used
equipment. The user of electrical and electronic equipment – intended for
households – is obliged to return it to authorized collector after its use.
However, it should be remembered that products classified as electrical or
electronic equipment should be disposed of at authorized collection points.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>