Klipsch DETROIT Portable Bluetooth Speaker User Guide
- July 25, 2024
- Klipsch
Table of Contents
Klipsch DETROIT Portable Bluetooth Speaker
INSIDE
Portable BT Speaker
BUTTONS
BATTERY CHARGE
USB REVERSE CHARGING
BLUETOOTH® WIRELESS TECHNOLOGY
* Example only. Your device may differ.
BROADCAST MODE PAIRING
CARE AND CLEANING
FACTORY RESET
INSTALL THE KLIPSCH CONNECT APP
Getting Started
Product Registration
Virtual Remote Control and EQ
IMPORTANT SAFETY INSTRUCTIONS
-
DO NOT use this apparatus near water.
-
CLEAN ONLY with dry cloth.
-
DO NOT block any ventilation openings. Install in accordance with the manufacturer’s instructions.
-
DO NOT install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
-
DO NOT defeat the safety purpose of the polarized or grounding type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wider blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
-
PROTECT the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
-
ONLY USE attachments/accessories specified by the manufacturer.
-
USE ONLY with a cart, stand, tripod, bracket, or table specified by the man-ufacturer, or sold with the apparatus.
When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. -
UNPLUG this apparatus during lightning storms or when unused for long periods of time.
-
REFER all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
-
DO NOT expose this apparatus to dripping or splashing and ensure that no objects filled with liquids, such as vases, are placed on the apparatus.
-
To completely disconnect this apparatus from the AC Mains, disconnect the power supply plug from the AC receptacle.
-
The mains plug of the power supply apapter shall remain readily operable.
-
DO NOT overload wall outlets or extension cords beyond their rated capacity as this can cause electric shock or fire.
The exclamation point, within an equilateral triangle, is intended to alert
the user to the presence of important operating and maintenance (servicing)
instructions in the literature accompanying the product.
The lightning flash with arrowhead symbol within an equilateral triangle is
intended to alert the user to the presence of uninsulated “dan-gerous voltage”
within the product’s enclosure that may be of sufficient magnitude to
constitute a risk of electrical shock to persons.
WARNING : To reduce the risk of fire or electrical shock, do not expose
this apparatus to rain or moisture.
WARNING : No naked flame sources – such as candles – should be placed on
the product.
THIS PRODUCT USES LITHIUM-ION BATTERIES. IF MISUSED OR ABUSED THIS CAN RESULT IN:
- Smoke or gas hazard
- Heat hazard
- Fire hazard
- Explosion hazard
WARNING
-
Batteries (battery pack or batteries installed) shall not be exposed to excessive heat such as sunshine, fire or the like.
-
Risk of leakage. Only use the specified type of batteries. Never mix new and used batteries.
Observe correct polarity. Remove batteries from products that are not in use for extended periods of time. Store batteries in a dry place. -
Do not handle leaking or damage Lithium batteries.
-
Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type.
-
Do not place batteries in mouth or ingest. Keep out of reach of children and pets.
-
Do not recharge non-rechargeable batteries.
-
Operating temperature between 32ºF/0ºC and 95ºF/35ºC
-
Please dispose of any used batteries properly, following any local regulations. Do not incinerate.
-
WARNING: Do Not Open! Risk of Electrical Shock. Voltages in this equipment are hazardous to life. No user-serviceable parts inside. Refer all servicing to qualified service personnel.
-
Place the equipment near a main power supply outlet and make sure that you can easily access the power breaker switch.
In Singapore, please only use the provided 3-pin detachable plug adapter to charge or power the product.
EU COMPLIANCE INFORMATION
Eligible to bear the CE mark; Conforms to European Union Low Voltage Directive
2006/95/EC; Europe-an Union EMC Directive 2004/108/EC; European Union WEEE
Directive 2002/96/EC; European Union Eco-Design Directive 2009/125/EC;
European Union Radio and Telecommunications Terminal Equipment (R&TTE)
Directive 1999/5/EC; European Union Restriction of Hazardous Substances Recast
(RoHS2) Directive 2011/65/EC;
This product contains batteries that are covered under the 2 006/66/ EC
European Directive, which cannot be disposed of with normal household waste.
Please follow local regulations.
You may obtain a free copy of the Declaration of Conformity by contacting your
dealer, distributor, or Klipsch Group, Inc.’s worldwide headquarters. Contact
information can be found here: http://www.klipsch.com/Contact-Us
WEEE NO TICE
Note : This mark applies only to countries within the European Union (EU)
and Norway.
This appliance is labeled in accordance with European Directive 2002/96/EC concerning waste of electrical and electronic equipment (WEEE). This label indicates that this product should not be disposed of with household waste. It should be deposited at an appropriate facility to enable recovery and recycling.
The SAR limit of USA (FCC) is 1.6 W/kg averaged over one gram of tissue.
Device has also been tested against this SAR limit, the testing distance of
body is 0mm.
The SAR limit of ISED (IC) is 1.6 W/kg averaged over ten gram of tissue.
Device has also bee tested against this SAR limit, the testing distance of
body is 0mm.
FCC/IC
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1) this device may not
cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
NOTE : Unauthorized modifications could void the user’s authority to
operate the equipment.
ISEDC STATEMENT
This device complies with Innovation, Science, and Economic Development Canada
license- exempt RSS standard(s). Operation is subject to the following two
conditions: (1) this device may not cause interference, and (2) this device
must accept any interference, including interference that may cause undesired
operation of the device. This Class B digital apparatus complies with Canadian
ICES-003.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>