KSIX X96 Android Smart TV Box User Manual

KSIX X96 Android Smart TV Box

Product Information

Specifications:

• Model: X96
• Connection: Wireless
• User Manual: X96 User Manual Version 1.1

Product Usage Instructions

1. Setting up the X96:

Ensure the device is charged or connected to a power source. Press the power button to turn on the X96.

2. Wireless Connection:

To establish a wireless connection, navigate to the settings menu on the X96 device. Select the Wi-Fi option and choose your desired network. Enter the password if required to connect.

3. Navigating the User Manual:

Refer to the X96 User Manual Version 1.1 for detailed instructions on using the device. You can navigate through the manual using the provided page numbers.

Frequently Asked Questions

• Q: How do I reset the X96 device?
  • A: To reset the X96, locate the reset button on the device and press it using a small tool such as a paperclip. Hold the button for a few seconds until the device restarts.
• Q: Can I connect the X96 to multiple wireless networks?
  • A: Yes, you can connect the X96 to multiple wireless networks by accessing the Wi-Fi settings and choosing different networks as needed.

Package Contents

Connection Diagram

TV control

1. Press “SET” key on set-top box remote control for 3-4 seconds, LED light will change from dark to light and enter the learning state.
2. Press Learning Key on set-top box remote control, LED light flashes and enters learning reception state.
3. Align and maintain the transmitter head of the set-top box remote control and the TV remote control in a straight line at a distance of about 3 to 10 cm, press the TV remote control button and hold it open for about 1 second
4. Set-top box remote control’s LED light flashes quickly three times after the success of learning and continues to remain long on. You can select other learning buttons again.
5. Repeat 2-4 step several times for learning other buttons.
6. After learning, press “SET” key on set-top box remote control and save it to exit learning state, LED light dies out.

Installation Steps

1. Connect the TV Box with the power supply.
2. Connect the TV Box to your TV with an HD cable or AV cable.
3. For a wired connection, plug in Ethement cable from the TV Box to your modem or router. For wireless,choose your WiFi network and input your WiFi password.

Key Features

•  Amlogic S905X3 64-bit quad core ARM Cortex A55 CPU with ARM G31 MP2GPU processor.
• 4K video decoding 10-bit HEVC and AVS + codec support, H.264 up to 4K 60Hz.
• 10/100M Ethernet,802.11b/g/n/ac 2.4G/5G WiFi,BT4.X.
• Android 9.0 OS, OTA upgrade support.

Multi-Bildschirm Interaktion

The Screen Casting

Introduction:

The TV Box lets you play photos, music, and videos from your smartphone or tablet computer on your TV.

Preparation:

Make sure your device(s) and TV Box are connected to the same network.

How to use

After your device(s) and TV Box are connected to the same network, the logo will show up in the related applications of your device(s).Click the and share the photos, music and videos on TV.

FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

NOTE 1: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

NOTE 2: Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

FCC Radiation Exposure Statement:

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>