SOLIGHT PX04 Outdoor Protective Case Instructions
- July 25, 2024
- Solight
Table of Contents
SOLIGHT PX04 Outdoor Protective Case Instructions
PROTECTION AGAINST CABLE CONNECTIONS DAMAGE
Prevents oxidation of connectors caused by water.
Unables unexpected disconnection or damage.
Protects cable connections from moisture and dirt.
Can be used with electric devices in outdoor and indoor.
Instructions for use:
!! Before installation, the supply cable must be disconnected from the mains
!!
- Push in the recess of the case with your thumb, open the safety cover and open the case in two halves.
- Connect the cable plug to the socket of the other cable.
- Make sure the plug and socket is properly seated in the housing. Alternatively, adjust the interior space with a sliding partition.
- Thread both cables through the rubber seals on the sides of the housing.
- Close the housing and safety cover.
- Only now connect the supply cable to the mains.
SAFETY NOTICE:
The protective case is water resistant but not waterproof. Do not immerse in
water or snow. Protect from water spray. If possible, put the protective case
somewhere higher – on a stone, a tree, etc. Keep the rubber seals clean. The
housing is not designed for use with more than two separate cables, i.e. there
can only be one input and one output cable.Solight Holding servo. company in
no event shall be liable for property damage or personal injury caused by
improper connection or improper use.
Manufacturer: Slight Holding,
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>