element EP400AB55R 55 Inch 4K UHD Partial Sun Outdoor Television User Guide

element EP400AB55R 55 Inch 4K UHD Partial Sun Outdoor Television

WHAT’S INCLUDED

WHAT YOU’LL NEED

(NOT INCLUDED)

CONNECT DEVICES TO YOUR TV

Your TV’s connections are secured behind a panel door on the back of your TV. Th is panel is lined with foam to keep dust & moisture out and keep your cords dry and in place.
To access your TV’s ports and connect devices, complete the following:

Before mounting

1. Place TV screen-down on a clean, flat, soft surface
   (ie: blanket) to prevent scratches or damage to the screen.

2. Locate the panel door on the back of your TV, remove the seven screws by hand and open panel door. See figure one.

3. Find the power cord (located inside the door) and run the plug out to the bottom of the panel.
   Do not connect to power until all cable connections have been made. See figure two.

4. Plug in any devices and ensure they are securely connected.
   Device cords should run flat out the bottom of the panel (between the two bottom screw holes) and not be layered. See figure two.

5. Close the panel door and replace the seven screws tightly by hand, ensuring there are no large gaps between the foam and cords.

CONNECT DEVICES TO YOUR TV

Check to ensure that you have selected the right cables for the ports and that they are connected securely (cables and external devices not included). Loose connections can affect your picture and audio quality.

TV PLACEMENT

IMPORTANT: Choose a location for your TV where it will NOT be in direct sunlight and is partially shaded (ie: near trees, under structures, patio
cover, etc.). Remember that the position of the sun changes throughout the day, so choose a location and position based on the time of day you would
use it most often.

WARNING: Th e TV must be installed at least fi ve feet from a pool, spa, or other body of water.

MOUNTING YOUR TV

Your TV has four mounting holes for a VESA approved mounting bracket (not included). Please ensure your wall mount can hold >71lbs and is compatible with a 300 x 300 VESA mount pattern. A minimum of two people are required for installation.
CAUTION: Your new TV is heavy! If you have any doubts about your ability to safely install your TV, please consult a professional installer.

1. Place TV screen-down on a clean, flat, soft surface (ie: blanket) to prevent scratches or damage to the screen.

2. Using a Phillips head screwdriver, remove the four screws located inside the VESA mount points as shown.
   WARNING: Th e included screws are NOT for use with a wall mount and should be removed before mounting.

3. Mount the VESA bracket using four M8 x 20 mm (max depth) screws (not included) and follow the mounting instructions provided with your wall mount.
   TIP: Please connect all your devices prior to mounting your TV, as the connections panel will not be easily accessible after mounting.

SETTING UP YOUR TV

Place Batteries in Remote
Power your TV remote by inserting the included batteries carefully matching (+) and (-) indicated inside the battery compartment.
Place remote inside protective sleeve for added protection against falls or condensation. The protective sleeve is not weather-proof. Please properly store your remote indoors when not in use.

If your remote gets warm/hot during use, discontinue use and contact customer support immediately.

Plug in and Turn on TV
Find your TV’s power cord by accessing the panel door located on the back of your TV (see pages 4-5 for complete access instructions). Next, plug your TV into the wall outlet and press the power button on your remote control.

Follow the On-Screen Instructions
When your TV powers on, follow the easy on-screen instructions for setup.
Your TV will automatically detect wireless networks in your area, so have your network name and password handy. If you aren’t ready to connect to a wireless network you can still use it as a regular TV.
A paid subscription or other payments may be required for some streaming channels.
Channel availability subject to change and varies by country.

Activate Your Smart TV
Activate your TV using your computer, smartphone, or tablet to link to a Roku account. You need a Roku account to activate your TV and access entertainment across thousands of streaming channels.
NOTE: ROKU DOESN’T CHARGE FOR ACTIVATION SUPPORT – BEWARE OF SCAMS.

Roku accounts are free and while a valid credit card number is not required to create a Roku account, saving your credit card information makes renting and purchasing entertainment from the Roku Channel Store fast and convenient.
Once connected to your account, your TV will automatically update with the latest software, and you can start streaming immediately.

USING YOUR REMOTE

The Roku TV remote should feel right at home in your hand. We designed it to be incredibly intuitive for watching TV and navigating on-screen menus.

1. Power Turn TV on and off
2. Back Return to previous screen
3. Home Return to Roku Home screen
4. Volume Raise and lower volume
5. OK Select an option from a menu
6. Navigate Move up, down, left or right
7. Mute Mute and restore sound
8. Instant Replay Replay the last few seconds of streaming video
9. Sleep Set the sleep timer
10. Options Access to picture settings, more streaming channel icons and more
11. RWD Rewind streaming video,  scroll left one page at a time
12. Play/Pause Start or pause playback
13. FWD Fast forward streaming video, scroll right one page at a time

TIP: The button gives you easy access to picture settings, display options and more. Try it on every screen.
Actual remote includes pre-set channel buttons with channel logos.

CONNECTING AN ANTENNA

With the built-in tuner you can connect your TV to an antenna and enjoy over- the-air entertainment.

1. When the setup wizard is complete select the Antenna/Live TV icon from the home screen.
2. Follow the on-screen instructions.
3. Whenever you want to watch antenna TV, select the Antenna/Live TV icon.
4. Live TV Pause feature: Pause up to 90 minutes of live antenna TV when you connect a 16 GB or larger USB drive to your TV.
   All data on the USB drive will be deleted prior to use.

UNIVERSAL REMOTE SETUP
If you prefer to use your cable set-to box or satellite receiver remote as a universal remote, please refer to the manual your cable or satellite service provided. It includes instructions on how to program your remote to your TV.
You can find the most common cable and satellite provider universal remote codes at roku.com/universalremote.
FOR SUPPORT, VISIT ELEMENTELECTRONICS.COM/SUPPORT

LET’S REGISTER YOUR PRODUCT

It’s super easy, just head on over to elementelectronics.com/register

BENEFITS OF REGISTERING YOUR PRODUCT:

• Support
  Get assistance quickly by pre-registering your product.

• News & Offers
  Take advantage of the latest news and special offers from Element.

• Updates
  Stay current with important product updates and notifications.

WARRANTY

Warranty
Receive a 2 year warranty with product registration
1 year manufacturer warranty with purchase or 2 year warranty with product registration within 90 days of purchase.

WE’RE HERE TO HELP

Find resources and get help with product setup, connecting devices, technical issues, downloading manuals and more!

We’re available 24 hours a day, 7 days a week

• elementelectronics.com
• 1.888.842.3577
• customerservice@elementelectronics.com

To download the full Roku TV User Guide visit go.roku.com/rout

References

• Element Electronics Home - TVs, Audio, Home Entertainment, Appliances
• Product Registration | Element Electronics
• How to set up your Roku TV system|Set up your TV
• How to set up a cable, satellite, or universal remote to control your Roku TV™|Universal remote codes for Roku TV

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>