baby trend AC01XXXC Bounce 3 In 1 Activity Center Plus Instruction Manual
- July 26, 2024
- baby trend
Table of Contents
baby trend AC01XXXC Bounce 3 In 1 Activity Center Plus
Specifications
- Brand: Baby Trend
- Model: AC01XXXC
- Product Name : Bounce N’ Play 3-In-1 Activity Center PLUS
- Recommended Age : 4 months and above
- Address: 13048 Valley Blvd. Fontana CA 92335
- Contact: 1-800-328-7363 (8:00 a.m. ~ 4:30 p.m. PST)
- Website: www.babytrend.com
Read all instructions BEFORE assembly and USE of product.
KEEP INSTRUCTIONS FOR FUTURE USE.
WARNING
WARNING : Younger infants betw been 4 to 6 months are right at the critical age to be considered safe while playing in a seated style activity center. Your child MUST ALREADY be able to hold their head upright and steadily unassisted before being placed in the activity center. DO NOT use the activity center if they cannot.
STRANGULATION HAZARD
Strings can cause STRANGULATION!
- DO NOT place items with a string around the child’s neck, such as hood strings or pacifier cords.
- DO NOT suspend strings over products or attach strings to toys. The Stationary Activity Center is: Only for use by infants at least 4 months old and who can hold their head up unassisted.
FALL HAZARD!
Babies can FALL from the unit resulting in head injuries.
- Never leave a child unattended. Always keep the child in view while in the product.
- Never use near stairs, stoves or ovens, heaters, fireplaces, swimming pools, or other dangerous areas. To avoid tipping over, place the product on a flat, level surface.
- NEVER lift this product with your child in it.
- NEVER place the product on countertops, tables, or any other elevated surface.
Discontinue seated use mode if the child can climb out or begins to walk, and
reaches 30 pounds in weight or 32 inches in height.
Do not use the stationary activity center if it is damaged or broken.
Discontinue use should any part become damaged. Please contact our customer
service at 1-800-328-7363 to order
replacement parts or arrange for repairs.
Read all instructions before assembly and use of the stationary activity
center.
Keep instructions for future use.
IMPORTANT! To ensure the safe operation of your product, please follow
these instructions carefully. Please keep these instructions for future
reference.
IMPORTANT! Before assembly and each use, inspect this product for damaged
hardware, loose joints, missing parts or sharp edges. NEVER use if any parts
are missing or broken.
IMPORTANT! Adult assembly is required.
BABY TREND® CUSTOMER SERVICE
The Customer Service Department can be contacted at 1
800-328-7363 Monday through Friday
between 8:00 a.m. and 4:30 p.m. (PST). Return Authorizations are required
before returning product(s) to Baby Trend®.
BABY TREND® SERVICIO AL CLIENTE
El Departamento de Servicio al Cliente puede ser contactado a 1
800-328-7363 Lunes a viernes entre 8:00
a.m. y 4:30 p.m. (PST).Un numero de autorizacion es requerido antes de la
devolución de los producto(s) a Baby Trend®.
BABY TREND® SERVICE CLIENT
Le service client peut être contacté au 1
800-328-7363 du lundi au vendredi 8 h –
16 h 30 (PST). Une autorisation sera nécessaire avant de retourner le produit
à Baby Trend®.
PARTS
- Check that you have all the parts for this model before assembling the Activity Center.
ASSEMBLY
SWIVEL SEAT MODE
-
Insert each leg into the underside of the tabletop (Fig. 1a).
NOTE: Ensure that the pin clicks into position. -
If needed, Align the seat to the center opening and press it down firmly. The seat must completely click into to the tabletop (Fig. 1b).
NOTE: Rotate the seat to ensure the swivel function is active. -
To attach and detach the seat cover, see step 7.
-
SEAT REMOVAL
SEAT REMOVAL
- To remove the seat, lift the tabletop to expose one of three tabs underneath. Detach one of the tabs by pushing it off the tabletop (Fig. 2a).
- From the top of the Table Top, use the edge of the seat to lift it off the tabletop (Fig 2b).
ADJUSTABLE PLATFORM SET UP
- Underneath the tabletop pinch and pull out the 3 small straps (Fig. 3a). Underneath the platform unhook the 3 adjustment plates, pinch and pull out the 3 large straps (Fig. 3b).
- With the smooth side up, align the pointed side of the platform to the front of the tabletop. Hook the adjustment plate to a small strap using the lowest hoop (Fig. 3c). Repeat for the rear straps.
- To adjust the height, unhook the adjustment plate and put it through the next division of the strap (Fig. 3d).
- ATTENTION: Always secure the straps when the platform is not in use. Refer to steps 4c and 4d.
NOTE: The Platform has 3 adjustable height levels. Always adjust all the straps to the same level (Fig. 3e).
ACTIVITY TABLE MODE
-
If the platform is attached to the activity center, you must first reverse step 3.
NOTE: Always store away all straps for the tabletop mode as seen below. -
Align the platform to the center opening, push the 2 tabs into the front first and press down firmly (Fig. 4a).
-
To remove the platform apply pressure from underneath at the pointed side of the platform while holding down the tabletop (Fig. 4b). The platform should release easily.
PLATFORM POSITIONS
-
Use level 1 to place the platform in the highest position, level 2 for middle position and level 3 for the lowest position (Fig. 3f).
NOTE: Always use the level that is most suitable for your child’s height. -
To remove the platform: unhook the adjustment plate from the small strap (Fig. 3g).
NOTE: See strap storing in step 4.U
STRAP STORAGE
Tabletop Straps : Underneath the tabletop, put the strap into the storage
slot. Pinch the strap and put the second hoop into the tabs. Repeat for the
other 2 straps (Fig. 4c).
Platform Straps : Always secure the straps when the platform is not in
use. Be sure to lay each strap back over itself and clip each adjustment plate
to the strap. Store the strap by pinching it into the small tabs (Fig. 4d). DO
NOT USE product with any loose and unsecured straps. Always check the product
before each use.
BATTERY INSTRUCTION
- Reference the diagram below. The light and sound board requires 3 AAA batteries. Reference
(Fig. 5) for battery installation. Unscrew the battery door and pull outward. Install batteries as shown. Secure the battery door with a screw and push until it clicks into place.
CAUTION: Keep batteries out of children’s reach.
To prevent battery leaks, which can burn skin and eyes:
- Remove batteries when storing products for a long time.
- Dispose of used batteries immediately.
- Always replace the entire set of batteries at one time.
- Never mix old and new batteries or batteries of different brands or types.
- Requires three AAA (LR03) batteries (not included) for toy operation.
- Non-rechargeable batteries are not to be recharged.
- Batteries need to be inserted with the correct polarity.
- The supply terminals are not short-circuited.
- Rechargeable batteries are to be removed from the toy before being charged.
- Rechargeable batteries are only to be charged under adult supervision.
TOY ATTACHMENTS
- Place toys in this order as shown. Toys must be properly attached before use (Fig. 6a).
NOTE: ONLY the rattle and the rocket toys are interchangeable.
All toys must be aligned with their single or double tab housings on the activity center tray (Fig. 6b).
Set the toy base in alignment with the tabletop fitting. From underneath the tabletop push the lock up and turn it left to lock.
BATTERY DOOR
Light and Sound Board Diagram
NOTE: T o activate the light and sound board, use the ON / OFF Switch.
TOY ATTACHMENT
Use the diagram below to lock the toys onto the tabletop.(1) Push the tab
up and rotate it left to lock. (2) Rotate the tab right to release the toy.
(3) Always put the small tab lock back into the tabletop when not in use.
MAINTENANCE
DO NOT MACHINE WASH. For metal and plastic parts, use only lukewarm water and mild soap.
SEAT FABRIC
- To remove the seat fabric for maintenance, pull out all the plates from the tab on the seat base (Fig. 7a).
- To reattach the fabric, insert the warning label side towards the backrest of the seat base. Fold the fabric over and insert the rear center plate into the tab. Continue to connect all plates around the seat base tabs. All plates and tabs must be secured before use (Fig. 7b).
TABLE LEGS
To remove the legs from the tabletop, press in the pin and pull the leg out. Repeat for the other 2 legs (Fig. 8).
FCC Statement
This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interfer-ence that may cause undesired operation.
WARNING: Changes or modifications to this unit are not expressly approved by the party responsible for compliance and could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, under Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used under the instructions, may cause harmful inter-ference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the inter- ference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
WARRANTY
DO NOT RETURN YOUR PRODUCT TO THE STORE. PLEASE CONTACT BABY TREND® FOR REPLACEMENT PARTS, SERVICE, AND REPAIR.
The Baby Trend® warranty covers workmanship defects within 1 year of purchase. Any product that has been subjected to misuse, abuse, abnormal use, excessive wear and tear, improper assembly, negligence, environmental exposure, alteration or accident, or has had its serial number altered or removed invalidates all claims against the manufacturer. Any damage to property during installation is the sole responsibility of the end user.
Customer Service Department can be contacted at 1 800-328-7363 Monday through Friday between 8:00 a.m. and 4:30 p.m. (PST). Return Authorizations are required before returning product(s) to Baby Trend®. Please visit http://babytrend.com/pages/limited-warranty for complete warranty details.
More Information
- Baby Trend, Inc. 13048 Valley Blvd. Fontana CA 92335
- 1- 800-328-7363 (8:00 a.m. ~ 4:30 p.m. PST) www.babytrend.com
- AC01XXXC_3L_022124.2
Copyright © 2024, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados. Tous droits réservés.
FAQ
- Q: What should I do if my child outgrows the weight or height limit?
- A: Discontinue use if your child can climb out, and reaches 30 pounds in weight, or 32 inches in height.
- Q: How do I order replacement parts?
- A: Contact customer service at 1-800-328-7363 to order replacement parts or arrange for repairs.
- Q: Can the platform height be adjusted?
- A: Yes, the platform has 3 adjustable height levels. Ensure all straps are adjusted to the same level for safety.
References
- Limited Warranty Coverage – Baby Trend
- Baby Trend® | Car Seats, Strollers, High Chairs, Nursery and More!
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>