SEALEY CR84.V2 Deluxe Steel Creeper Instructions
- June 4, 2024
- SEALEY
Table of Contents
DELUXE STEEL CREEPER
MODEL NO: SCR84.V2
Thank you for purchasing a Sealey product. Manufactured to a high standard,
this product will, if used according to these instructions, and properly
maintained, give you years of trouble-free performance.
IMPPORRTATANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE
OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THE PRODUCT CORRECTLY AND
WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE
DAMAGE AND/OR PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE
INSTRUCTIONS SAFE FOR FUTURE USE.
SAFETY
- WARNING! Ensure health & safety, local authority, and general workshop practice regulations are strictly adhered to when using this equipment.
- Familiarise yourself with product application and limitations, as well as the specifi c potential hazards peculiar to this product.
- Maintain creeper in good condition. Use an authorised service agent.
- Replace or repair damaged parts. Use only genuine parts only. Nonauthorized parts will invalidate the warranty.
- WARNING! Use the creeper on the level and solid ground, preferably concrete.
- DO NOT use the creeper for any purpose other than that for which is designed.
- DO NOT stand on the creeper.
- DO NOT get the creeper wet or used it in damp or wet locations or areas where there is condensation.
- DO NOT clean the creeper with any solvents which may damage the paint surface or padded areas.
INTRODUCTION
Heavy-duty steel framework with powder coat paint fi nish. Easy-rolling Ø75mm
swivels composite castors. Vinyl-covered back and headrest.
Designed for the professional workshop.
SPECIFICATION
Model no: …………………………………………………….. SCR84.V2
Capacity: ……………………………………………………………. 180kg
Size: (L x W x H) …………………………….. 1135 x 510 x 185mm
Wheels: …………………………………………………………………….. 6
ASSEMBLY
4.1. ATTACH THE HEADREST SUPPORT BARS
4.1.1. Position the headrest support bars (fi g 1-1) within the creeper frame
(fi g 1-3) and secure in place with four fi xing screws (fi g 1-2).
4.2. ATTACH THE HEADREST
4.2.1. Screw the headrest (fi g 2-1) onto the headrest support bars (fi g 1-1)
using four cross head screws from underneath.
4.3. ATTACH THE CASTOR WHEELS
4.3.1. Fix the six castor wheels (fi g 2-2) to the creeper frame (fi g 1-3)
using hex tube nuts (fi g 2-3).
MAINTENANCE
5.1. Before each use inspect the overall condition of the creeper for broken, cracked or bent parts that may effect the proper operation.
OPERATION
- WARNING! If you raise the vehicle to work under it, set the vehicle on jack stands.
- DO NOT work under a vehicle raised on a jack(s).
- If the vehicle is on the ground, block the tires, apply the handbrake, and put it into gear or Park mode.
6.1. As you slide under the vehicle and prior to sliding out on the creeper, keep your head fl at the headrest (fi g 2-2).
ENVIRONMENT PROTECTION
Recycle unwanted materials instead of disposing of them as waste. All tools,
accessories, and packaging should be sorted, taken to a recycling center, and
disposed of in a manner that is compatible with the environment. When the
product becomes completely unserviceable and requires disposal, drain any
fluids (if applicable) into approved containers and dispose of the product and
fluids according to local regulations.
Note: It is our policy to continually improve products and as such we
reserve the right to alter data, specifications and component parts without
prior notice. Please note that other versions of this product are available.
If you require documentation for alternative versions, please email or call
our technical team on technical@sealey.co.uk
or 01284 757505.
Important: No Liability is accepted for incorrect use of this product.
Warranty: Guarantee is 12 months from purchase date, proof of which is
required for any claim.
Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR
01284 757500
01284 703534
**** sales@sealey.co.uk
**** www.sealey.co.uk
© Jack Sealey Limited
Original Language Version
SCR84.V2 Issue 2 (4) 19/11/21
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>