Danfoss Comfort 296 AC Drives and Controls Installation Guide
- July 24, 2024
- Danfoss
Table of Contents
Danfoss Comfort 296 AC Drives and Controls
Product Information
- Product Name: ECL Comfort 296
- Model Number: 087H3000
- Power Supply: 230 V a.c.
- Manufacturer: Danfoss
Specifications
- Dimensions: 138 x 92 mm
- Power Rating: 4 (2) A / 230 V a.c. 0.2 A / 230 V a.c.
- Compliance: IEC 61554
Product Usage Instructions
Installation
Follow the steps outlined in the installation guide provided with the product.
Wiring
Connect the device to the power supply following the specified power ratings and wiring instructions.
Programming
Refer to the user manual for programming instructions to set up the ECL Comfort 296 according to your requirements.
Troubleshooting
If you encounter any issues with the product, refer to the troubleshooting section of the user manual for guidance.
Dimension
Installation Guide
230 V a.c.
230 V a.c., safety thermostat
A266, ex
Danfoss Thermo-actuator ABV
Pt 1000 (1000 Ω / 0 °C)
S1…S8
ECA 30 / 31
Modbus
M-bus
Master / slave
Contact Us
Danfoss A/S
Climate Solutions
45 7488 2222
ECL Comfort 296: www.danfoss.com
Leanheat® Monitor: Leanheat® Monitor website
Leanheat® Monitor – 5-step instructions
Leanheat® Monitor – 087H3000 (5-step instructions)
https://www.youtube.com/user/DanfossHeating
Playlists -> How-to Videos -> District Energy installation videos
Frequently Asked Questions
Q: Where can I find additional installation videos for ECL Comfort 296?
A: You can visit the Danfoss website at www.danfoss.com or check their YouTube channel for How-to Videos and District Energy installation videos.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>