Panasonic LED High Bay Instruction Manual
- July 23, 2024
- Panasonic
Table of Contents
LED High Bay
“`html
Specifications:
- Product: LED High Bay
- Model No.: NYV20100BE2A-T
- Installation Date: 2022.08.08
- IP Grade: IP65 (waterproof for indoor use)
Product Usage Instructions:
Safety Precautions:
Before using the LED High Bay, please adhere to the following
safety precautions:
-
Avoid placing the lamp in areas with thin ceilings without
reinforcement or covered with flammable materials like barrels or
boxes. -
Maintain a distance of more than 1m between the lamp and any
irradiated surface to prevent fire hazards due to high
temperatures. -
Operate the lamp at room temperature and avoid exposure to
direct sunlight or extreme environmental conditions. -
Ensure regular inspections by experts to prevent accidents like
falling, electric shock, or fire.
Installation Method of Components:
Follow these steps for proper installation:
-
Ensure to cut off the power supply before installation to
prevent electric shock. -
Remove all packaging accessories and adhesive tapes before
installing the lamp to prevent fire hazards. -
Confirm that the ceiling has sufficient strength to support the
weight of the lamp to avoid accidents like falling. -
Select suitable installation parts such as a patio hanging
ring, hanging chain, and hook for secure installation. -
Connect the power cord properly using an IP65 waterproof
connector to prevent fire, electric shock, and other
accidents.
Connecting Power Cord:
Follow these steps for connecting the power cord:
-
Ensure to cut off the power supply before connecting the
external power cord. -
Fix the power cord with a hanging chain using a cable tie to
protect it from damage. -
Use the IP65 waterproof connector for wiring and connect it
correctly according to the wiring sign on the connector to avoid
accidents.
Frequently Asked Questions (FAQ):
Q: What should I do if the lamp falls or gets damaged during
installation?
A: If the lamp falls or is damaged during installation,
immediately stop using it and consult a professional for inspection
and repair.
Q: Can I use this lamp in humid environments?
A: The lamp is waterproof for indoor use with an IP grade of
IP65. For humid environments, purchase a waterproof connector with
an IP grade above IP65 for safe usage.
“`
Instruction manual
LED High Bay
Model No.
(Please refer to the Specification Table)
Dear Users Thank you for purchasing our products. Before use, please read
carefully to ensure correct usage. Please keep this manual in a safe place.
Safety Precautions Please abide by them
Caution
During construction, please install in strict accordance with the Use
Instructions. Improper installation will cause accidents such as falling,
electric shock and fire. This lamp is an indoor appliance, and is only
suitable for installing on the ceiling. Please do not install it in the place
shown on the right. Avoid causing accidents such as falling, electric shock
and fire. Do not modify the lamp to avoid accidents such as falling, electric
shock and fire. The power supply applied shall not exceed the specified values
(input voltage 220V-240V ~, frequency 50/60Hz). Avoid causing accidents such
as electric shock and fire. Do not apply impact force to the lens, otherwise
it may cause the lens to fall. Do not use lenses with notch or crack,
otherwise the lenses may fall. Please do not modify the lamp and replace the
components. Otherwise, it may cause accidents such as electric shock and fire.
When the lamp gets exceptional, disconnect the power supply quickly. And
contact the sales company or construction company. Avoid causing accidents
such as electric shock and fire. The external flexible cable or cord of the
lamp cannot be replaced, if it is damaged, the lamp should be discarded.
Wall Ground
Thin ceiling without reinforcement
Place covered with barrel, box, etc.
Cautions
The temperature under the lamp is very high. Please keep the distance between the lamp
and the irradiated surface more than 1m.Otherwise, it may cause fire.
Please use this lamp at room temperature.
The LED light source has color differences, and even for the products of the same model,
there are differences in light color and brightness.
More than 1m
The lamps are waterproof for indoor use (IP grade is IP65). If you need to use them in humid
environment, please purchase waterproof connector with IP grade above IP65.
Please avoid direct sunlight and do not use it in high temperature, acidic or alkaline
environment.
Please inspect it once a year by yourself according to the “Construction Record”, and entrust
experts from the installation company to carry out regular inspection once every 3 years.
If regular inspection is not carried out, there will be a very low probability of accidents such
as falling, electric shock, fire, etc.
The light source inside this lamp should be replaced by the manufacturer or its service agent
or a person with similar qualifications.
Warning, Risk of
Electric Shock
NYV20100BE2A-T 2022.08.08
Installation Method of Components
Make sure to cut off the power supply before installation to prevent electric shock.
Waterproof connector
Supply cable
Lifting ring of the lamp Self-locking screw
Ceiling hook (purchase separately)
Hanging chain (purchase separately)
Hook (purchase separately)
Safety rope Power supply
Heat sink
Lens
Installation Method of Components
Make sure to cut off the power supply before installation to prevent electric shock.
Preparation and confirmation before installation
Make sure to remove the packaging accessories before installation. Before
installation, make sure that all packaging accessories and adhesive tapes have
been removed from the lamp to prevent fire. Please confirm that the ceiling
has enough strength to bear the weight of the lamp. Avoid causing accidents
such as lamp falling etc. Please choose suitable installation parts: patio
hanging ring, hanging chain and hook (as shown in the above figure). Install
the lamp
æ Install the hook ° Secure the patio hanging ring and chain to the ceiling bracket, and then install the hook to the hanging chain. ¸ Ensure that the ceiling for installing the patio hanging ring is stable to avoid falling and damage of the lamp.
ç Install the hanging ring of the lamp ° Install the lamp ring to the lamp by
turning it clockwise. ° Rotate the self-lock screw clockwise with screwdriver
to secure the lamp
hanging ring. ¸ Ensure that the self-locking screw completely fixes the lamp
lifting ring to
prevent the lamp from falling or
damaging.
è Install the lamp ° First, clip the hanging ring
into the hook. ° Pass the safety rope on the
lamp through the hook.
Connect the power cord
In order to ensure safety, please cut off the power supply before connecting
the external power cord. Fix the power cord with hanging chain by cable tie
Protect the power cord from damage due to contact with the lamp body. It is
recommended to use IP65 waterproof connector as shown in the following figure
for wiring.
Please connect the external power cord to the waterproof connector correctly
according to the wiring
sign on the waterproof connector.
æ After connection, the brown, blue, yellow/green wires shall not expose out
of the casing of the waterproof connector. ç Do not place the waterproof
connector on the lamp. è N and L have installation direction, be sure to
connect correctly. é In order to ensure safety, please connect the ground wire
first.
Improper connection will easily lead to fire, electric shock and other
accidents.
L (brown)
L Power cord of the lamp
Power cord of the lamp
External power cord
N (blue) Front side
N Note: After the power cord is installed, the internal wires shall not be exposed
Ground wire (yellow/green) Back side
Specification of lamp power cord:
Wire diameter 3 x 1.0mm2 L: brown wire N: blue wire Ground wire: yellow/green
wire
38mm 8mm
Repair·Maintenance
In order to use this product safely and efficiently, please clean and inspect
it regularly (once every 6 months). Long-term use without inspection may lead
to fire, electric shock, lamp falling and other accidents. When the lamp needs
to be cleaned, please wipe it with soft cloth and neutral detergent and then
wipe it with dry cloth. Please do not use detergents or organic solvents other
than neutral detergents to wipe the lamp. Avoid causing discoloration,
deterioration and strength reduction of or damage to the lighting fixture.
Please do not spray insecticide on the lamp, otherwise it will cause
discoloration of or damage to the lamp.
Construction Record
Installation Date Light Source Model
Inspection Date
Inspection Items
Inse ctici de
Remarks
Specifications
Model No.
NYV20100BE2A NYV20150BE2A NYV20110BE2A NYV20105BE2A NYV20155BE2A NYV20115BE2A
NYV20160BE2A NYV20164BE2A NYV20168BE2A NYV20162BE2A NYV20166BE2A NYV20120BE2A
NYV20101BE2A NYV20151BE2A NYV20111BE2A NYV20106BE2A NYV20156BE2A NYV20116BE2A
NYV20102BE2A NYV20152BE2A NYV20112BE2A NYV20107BE2A NYV20157BE2A NYV20117BE2A
NYV20161BE2A NYV20165BE2A NYV20169BE2A NYV20163BE2A NYV20167BE2A NYV20170BE2A
NYV20103BE2A NYV20153BE2A NYV20113BE2A NYV20108BE2A NYV20158BE2A NYV20118BE2A
NYV20104BE2A NYV20154BE2A NYV20114BE2A NYV20109BE2A NYV20159BE2A NYV20119BE2A
Rated Voltage /Frequency
220V-240V~ 50/60Hz
220V-240V~ 50/60Hz 220V-240V~ 50/60Hz
220V-240V~ 50/60Hz
220V-240V~ 50/60Hz
220V-240V~ 50/60Hz
220V-240V~ 50/60Hz 220V-240V~ 50/60Hz
220V-240V~ 50/60Hz
220V-240V~ 50/60Hz
220V-240V~ 50/60Hz
220V-240V~ 50/60Hz 220V-240V~ 50/60Hz 220V-240V~ 50/60Hz
Rated Current
Power
0.35A
75W (174 × 0.4W/LED module)
0.35A
75W (174 × 0.4W/LED module)
0.48A
100W (232 × 0.4W/LED module)
0.48A
100W (232 × 0.4W/LED module)
0.53A 110W (232 × 0.44W/LED module)
0.53A 110W (232 × 0.44W/LED module) 0.67A 140W (290 × 0.45W/LED module) 0.67A 140W (290 × 0.45W/LED module) 0.72A 150W (290 × 0.48W/LED module)
0.72A 150W (290 × 0.48W/LED module) 0.83A 175W (348 × 0.47W/LED module) 0.83A 175W (348 × 0.47W/LED module) 0.95A 200W (406 × 0.46W/LED module) 0.95A 200W (406 × 0.46W/LED module)
Beam Angle
Power Factor
0.95 0.95 0.95 0.95 0.95 0.95 0.95 0.95 0.95 0.95 0.95 0.95 0.95 0.95
¸ The style and color of lamps are subject to real products. ¸ Change is made
without prior notice. Panasonic Manufacturing (Beijing) Co., Ltd.
Origin: China
Address: No. 1, North Tongji Rd., Beijing Economic-Technological Development Area, Beijing Postal Code: 100176 Tel: (010) 67882438
()
°
°
°
° ( 220V-240Vj
50/60Hz)
°
°
°
°
°
° 1m ° ° LED ° ( IP IP65) IP IP65 1m
° “” 1 1 3 °
1.0m 1
NYV20100BE2A-T 2022.08.08
5
() ()
()
°
°
° : ()
æ ° ¸
ç°°¸
è ° °
6
¸ °
° IP65
¸æ
ç è/- é ¸
L()
L
N()
N
:
()
: 3 x 1.0mm2 L: N: : /
38 8
·
° ( 6 )
°
°
°
7
NYV20100BE2A NYV20150BE2A NYV20110BE2A NYV20105BE2A NYV20155BE2A NYV20115BE2A NYV20160BE2A NYV20164BE2A NYV20168BE2A NYV20162BE2A NYV20166BE2A NYV20120BE2A NYV20101BE2A NYV20151BE2A NYV20111BE2A NYV20106BE2A NYV20156BE2A NYV20116BE2A NYV20102BE2A NYV20152BE2A NYV20112BE2A NYV20107BE2A NYV20157BE2A NYV20117BE2A NYV20161BE2A NYV20165BE2A NYV20169BE2A NYV20163BE2A NYV20167BE2A NYV20170BE2A NYV20103BE2A NYV20153BE2A NYV20113BE2A NYV20108BE2A NYV20158BE2A NYV20118BE2A NYV20104BE2A NYV20154BE2A NYV20114BE2A NYV20109BE2A NYV20159BE2A NYV20119BE2A
220V-240V~ 50/60Hz
220V-240V~ 50/60Hz 220V-240V~ 50/60Hz
220V-240V~ 50/60Hz
220V-240V~ 50/60Hz
220V-240V~ 50/60Hz
220V-240V~ 50/60Hz 220V-240V~ 50/60Hz
220V-240V~ 50/60Hz
220V-240V~ 50/60Hz
220V-240V~ 50/60Hz
220V-240V~ 50/60Hz 220V-240V~ 50/60Hz 220V-240V~ 50/60Hz
0.35A 75W (174 × 0.4W/LED LED)
0.35A 75W (174 × 0.4W/LED LED)
0.48A 0.48A
100W (232 × 0.4W/LED LED) 100W (232 × 0.4W/LED LED)
0.53A 110W (232 × 0.44W/LED LED)
0.53A 110W (232 × 0.44W/LED LED) 0.67A 140W (290 × 0.45W/LED LED) 0.67A 140W (290 × 0.45W/LED LED) 0.72A 150W (290 × 0.48W/LED LED)
0.72A 150W (290 × 0.48W/LED LED) 0.83A 175W (348 × 0.47W/LED LED) 0.83A 175W (348 × 0.47W/LED LED) 0.95A 200W (406 × 0.46W/LED LED) 0.95A 200W (406 × 0.46W/LED LED)
0.95 0.95 0.95 0.95 0.95 0.95 0.95 0.95 0.95 0.95 0.95 0.95 0.95 0.95
¸ ¸ Panasonic Manufacturing (Beijing) Co., Ltd. :
: 1 : 100176 : (010) 67882438
8
(
)
NYV20100BE2A-T 2022.08.08
æ
ç
è
°
°
°
°
°
¸ ¸
æ ç è é
38mm 8mm
¸ ¸