Kwikset 53973 Contemporary Key Control Deadbolt Installation Guide

Kwikset 53973 Contemporary Key Control Deadbolt

Product Information

• The product is a deadbolt lock manufactured by Kwikset. It is available in both low profile and regular models. The low profile
  models include the 258 series, Uptown, Downtown, Midtown, and San Clemente rectangular deadbolts. The regular models include the 158, 159, 660, 665, 780, 816, 980, 985, Halifax, and Milan deadbolts.

• The installation guide can be used for installing various types of deadbolts. The required tools for installation may vary depending on the install type.

• Kwikset can be contacted at 1-800-327-5625 or through their website at www.kwikset.com.

Product Usage Instructions

• For Low Profile Deadbolts Models (258 series, Uptown, Downtown, Midtown, and San Clemente rectangular)

1. Extend the latch bolt (make sure the curve is on the bottom of the latch).
2. Adjust the backset of the latch if needed.
3. If the D-shaped hole is not centered, adjust the latch using the latch adjustment steps.
4. Install the latch by following the appropriate instructions fordoor edge chiseled or door edge not chiseled.
5. Determine the required mounting screws based on the thickness of your door.
6. Install the deadbolt interior by ensuring the turn piece is vertical and the mounting plate is pre-installed or re-installed if removed.
7. Install the deadbolt exterior by following the instructions for curve orientation and keeping it parallel to the door.
8. Use the screws determined in step 5 to secure the deadbolt.
9. If the screws are difficult to tighten, ensure the latch is installed correctly.
10. Proceed to Step 12 to finalize the installation.

• For Regular Deadbolts Models (158, 159, 660, 665, 780, 816, 980, 985, Halifax, and Milan)

1. Extend the latch bolt (make sure the curve is on the bottom of the latch).
2. Adjust the backset of the latch if needed.
3. If the D-shaped hole is not centered, adjust the latch using the latch adjustment steps.
4. Prepare the latch by installing the plate or collar based on door edge chiseled or not chiseled.
5. Install the latch by retracting the latch bolt and ensuring it is properly aligned with the door.
6. Install the front plate using provided screws and wood blocks.

• For further assistance in preparing your door, please scroll to the bottom of the manual or contact Kwikset at the provided phone number or website.

This manual can be used to install a variety of deadbolts.

*Tools

• *Tools will depend on install type

• For Low Profile Deadbolts Models (258 series, Uptown, Downtown, Midtown, and San Clemente rectangular)

• Follow steps 1 through 6

• For Regular Deadbolts Models(158, 159, 660, 665, 780, 816, 980, 985, Halifax and Milan)

• Follow steps 7 through 11

• Scroll to the bottom if you need help in preparing your door

Extend latch bolt (Low profile models)

Adjust the backset of the latch (if needed)

• Hold the latch in front of the door hole, with the latch case flush against the door edge.
• If the D-shaped hole is centered in the door hole, no adjustment is required. Proceed to step 4.
• If the D-shaped hole is NOT centered, adjust latch. See “Latch Adjustment” (step 3C).
• Latch Adjustment (only if needed)

Install Latch

• Install backplate.

• Install faceplate.

• or

• Use a screwdriver to retract the latch bolt.

• Install drive-in collar

Determine required mounting screws

• Measure the thickness of your door to determine the required mounting screws for step 6.

• Call Kwikset to order a service kit for 2-1/4” (57 mm) thick doors. Use the screws provided in the kit.

 Install deadbolt interior (Low profile models)

 Install deadbolt exterior

Troubleshooting

• To finalize your installation, proceed to Step 12.

Extend latch bolt (Regular deadbolt models)

• Hold the latch in front of the door hole, with the latch face flush against the door edge.

• If the latch holes are centered in the door hole, no adjustment is required. Proceed to step 9.

If the D-shaped hole is NOT centered, adjust latch. See “Latch Adjustment” (step 8C).

• Latch Adjustment (only if needed)

Prepare latch (if not pre-assembled)

Install latch (Regular deadbolt models)

 Install deadbolt (Regular deadbolt models)

 Install strike on door frame

Preparing Your Door

• For consumers requiring the door prep template, please visit: Drilling instructions

• Use template to mark holes on door

• Select the template that allows you to place the template on the EXTERIOR side of door. Fold template along fold line and place fold line along the edge of door. Place centerline approximately 38 in (97 cm) from the floor.

• Mark hole on the face of the door. Select desired backset before marking hole. If there is another hole in the door, or if you are drilling double doors, make sure to keep the backset consistent.

• Mark hole on the edge of the door. Select door thickness before marking hole.

Drill holes in door

• Drill from one side until the point of drill just breaks through, then complete hole from the other side to prevent splintering

• Determine which latch will be installed and prepare door edge

• Proceed to Next Step.

Prepare door frame for strike

• Locate center of strike hole:
  

• Measure back from door stop, 1/2 thickness of door.

• Register your product at www.kwikset.com/productregistration
• Rate your product at www.kwikset.com/reviews

WARNING: This Manufacturer advises that no lock can provide complete security by itself. This lock may be defeated by forcible or technical means, or evaded by entry elsewhere on the property. No lock can substitute for caution, awareness of your environment, and common sense. Builder’s hardware is available in multiple performance grades to suit the application. In order to enhance security and reduce risk, you should consult a qualified locksmith or other security professional

Installation Guide

• 1-800-327-5625
• www.kwikset.com

References

• Door Locks, Door Hardware, Smart Locks & Smartkey Technology | Kwikset
• Register Your Product | Kwikset
• Write a Review of your Kwikset Lock Product for a Chance to Win $250 a Month | Kwikset

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>