Yiqu Y125 Magnetic Wireless Charger User Manual
- June 1, 2024
- YIQU
Table of Contents
Yiqu Y125 Magnetic Wireless Charger
Packing list
Product Description
Specification yield
- Model: Y125
- Output: Phone: 15W/10/7.5W/5W
- Input: 5V/3A 9V/2A
Compatible Models
Smartphone
For iPhone: iPhone 15,iPhone 15 Plus,iPhone 15 Pro,Phone 15 Pro Max,iPhone
14,iPhone 14 Plus,iPhone 14 Pro,iPhone 14 Pro Max,iPhone 13,iPhone 13
Pro,iPhone 13 Pro Max, Phone 13 mini,iPhone 12, iPhone 12 mini,iPhone 12
Pro,iPhone 12 Pro Max,
How to use the products
- Mobile phone charging: connect the charging head to the wireless charging input-C type interface, the wireless charger indicator green light is always on, enter the standby state, place the phone in the wireless charging area, the indicator blue light breathing flashing, showing that the phone is charging normally, full then the green light is always on, if the phone is not charging normally, the green light is flashing.
Warm Tips
Please pay attention to the following issues, otherwise it may cause irregular charging, high charging temperature, intermittent charging, or even no charging.
- We recommendfast charger (9V/2A), which can charge three devices at th same time while maintaining the fastest speed.(5V/3A) chargers can only provide normal charging speed and will be slower than fast chargers.
- The charging distance is 2-8mm, please do not wear a protective cover that is thicker than 3mm.
- During the charging process, there is no metal or magnetic object around 6 cm in the center of the back of the phone
- The lower the temperature, the faster the charging speed, winter charging speed is faster than summer.
- Please do not charge in high temperature and humid environment to avoid damage to the circuit.
- Please put it out of reach of children to avoid unnecessary accidents.
About the FCC
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment shauld be installed and operated with
minimum distance 20cm between the radiator & your body.
This device complies with part 15 of the FCC rules operationis subject to the
following two conditions:
- this device may not cause harmful interference.
- this device must accept any interference received including. interference that may cause undesired operation.
FCC Warning
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and if not installed and used in accordance
with the instructions may cause harmful interference to radio communications.
However there is no guarantee that interference will not occur ina particular
installation if this equipment does cause harmful interference to radio or
television reception which can be determined by turning the equipment off and
on. The user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>