cudy GS1010PE 10-Port Gigabit PoE+ Switch Installation Guide

cudy GS1010PE 10-Port Gigabit PoE+ Switch

Specifications

• Model: GS1010PE
• Network Protocol: IEEE802.3 / IEEE802.3u IEEE802.3x / IEEE802.3af/at IEEE802.3at (30W) and IEEE802.3af (15.4w)
• DC Power: 48-55V Power over spare pairs 1/2(+) , 3/6 (-)
• AC Power Input: AC100~240V 52V ~ 2.3A
• Power Output: 120W
• Dimensions: 222mm x 163mm x 40mm
• Bandwidth: 20Gbps (non-blocking)
• MAC Address Table: 2K entries
• Packet Buffer Memory: 2M
• Forwarding Mode: Store-And-Forward
• Working Temperature: -20°C to 50°C
• Storage Temperature: -40°C to 80°C
• Working Humidity: Max relative humidity 90%, non-condensing
• Storage Humidity: Max relative humidity 95%, non-condensing
• Working Height: Max 10,000 feet (3,000 meters)
• Storage Height: Max 10,000 feet (3,000 meters)

Product Usage Instructions

Hardware Connection
To connect the 10-Port Gigabit PoE+ Switch GS1010PE, follow these steps:

1. Connect the Power Socket to the power source.
2. Connect the Powered Devices (PD) such as IP Cameras, Wireless APs, Smart VoIP phones to the PoE/PoE+ ports on the switch.
3. Connect the IP Camera, Wireless AP, Smart VoIP devices to the Ethernet ports on the switch.
4. Connect the switch to your Internet Router or NVR for network connectivity.

Physical Appearance
The 10-Port Gigabit PoE+ Switch GS1010PE has a front board and a back board. The front board features the PoE ports and Ethernet ports, while the back board includes the power input port for AC INPUT.

LED and Interface Explanation
The switch features LED indicators for Power, Link ACT, and Link status. The LEDs indicate whether the switch is powered on, connected to a device, or transmitting data.

FAQ

1. Q: What should I do if the Power LED is off?
   A: If the Power LED is off, check the power socket connection and ensure the switch is receiving power from the source.

2. Q: How many MAC addresses can the switch store?
   A: The switch can store up to 2K MAC addresses in its table for efficient network management.

3. Q: Can I connect non-PoE devices to the PoE ports?
   A: Yes, you can connect non-PoE devices to the PoE ports on the switch without any issues. The switch will only supply power to devices that require it.

Hardware Connection

Physical Appearance

Specifications

• Model GS1010PE
• Network Protocol  IEEE802.3 / IEEE802.3u IEEE802.3x / IEEE802.3af/at
• PoE Standard  IEEE802.3at (30W) and IEEE802.3af (15.4w)
• POE port output  DC 48-55V
• Power Pin  Power over spare pairs 1/2(+) , 3/6 (-)
• AC Input Voltage  AC100~240V
• Output 52V ~ 2.3A
• Total Power  120W
• Dimension(L×W×H) 222mm163mm40mm
• Bandwidth 20Gbps (non-blocking)
• MAC Address 2K MAC address table
• Packet Buffer Memory 2M
• Forwarding Mode Store-And-Forward
• Working Temperature -20~50℃
• Storage Temperature -40~80℃
• Working humidity Max relative humidity 90%, non-condensing
• Storage humidity Max relative humidity 95%, non-condensing
• Working hight Max 10,000 feet（3,000 meters）
• Storage hight Max 10,000 feet（3,000 meters)

LED and Interface Explanation

Trouble Shooting

• Make sure the equipment is installed according to the manufactures installation guide.
• Confirm RJ45 cable order meets EIA TIA568A or 568B standard.
• Replace the equipment with a proper functioning PoE Ethernet Switch to check if the equipment is damaged.
• Please contact your vendor if trouble still exists.

EU declaration of conformity
Cudy hereby declares that the device is in compliance with the essential requirements and other relevant provisions of directives 2014/30/EU, 2014/35/EU, 2009/125/EC and 2011/65/EU.The original EU declaration of conformity may be found at http://www.cudy.com/
For support and warranty, please visit: http://www.cudy.com/. Specifications are subject to change without notice. Cudy is a registered trademark of Shenzhen Cudy Technologies Co., Ltd. Other brands and product names are trademarks or registered trademarks of their respective holders.Copyright©2020 Shenzhen Cudy Technology Co., Ltd. All rights reserved.
EU Address: Otto esser 2c, 65451 Kelsterbach, Germany
Email: support@cudy.com
Email:support@cudy.com
Website: www.cudy.com

References

• Cudy, Your Home and Business Networking Solutions Provider
• Cudy, Your Home and Business Networking Solutions Provider

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>