cudy LT12 4G Cat 12 AC1200 Wi-Fi Router Installation Guide

: July 23, 2024
: cudy

Table of Contents

cudy LT12 4G Cat 12 AC1200 Wi-Fi Router
Product Usage Instructions
Installation
EU Declaration of Conformity
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

cudy LT12 4G Cat 12 AC1200 Wi-Fi Router

Specifications

Models: 4G Model, 5G Model
Network Compatibility: 2G/3G, 4G/WAN, 2G/3G/4G, 5G/WAN
SIM Card Type: Nano SIM

Product Usage Instructions

Installation

Install antennas if detachable.
Insert the SIM card into the SIM slot with the gold contacts facing down until you hear a clicking sound. Note: No hot-swapping. Insert or remove the SIM card only when the system is powered off.
Connect the power adapter to the router and press the power button. Wait for the system LED to turn solid on (may take 2-5 minutes).

Connecting to Network

Check the LED status:
- If solid on, the router is connected to the cellular network.
- If off, proceed to configure the router.
If signal is weak indoors, consider using extension antennas and placing them outdoors.

Router Setup

Connect to the router:
- Method A – Wi-Fi: Connect to the router’s Wi-Fi using the SSID and Password printed on the router.
- Method B – Wired: Turn off your device’s Wi-Fi and connect to the router’s LAN port via Ethernet cable.
Open a browser and go to http://cudy.net/ for setup.

SIM PIN and Configuration:
Input SIM PIN if prompted. Follow on-screen instructions for configuration.

FAQ:
Q: How do I know if my router is connected to the cellular network?
A: Check the LED status. A solid LED indicates a successful connection.

Installation

Install the antennas if there are detachable antennas.
With the gold contacts facing down, Insert your SIM card into the SIM slot until you hear a clicking sound.
Connect the power adapter to the router and press the power button. Wait for the system LED to turn solid on. This may take 2-5 minutes. Note: No hot-swapping. Please insert or remove the SIM card while the system is powered off.
Check the LED.
When the LED is solid on, the router is connected to the cellular network.
If the LED is off, please continue to conﬁgure the router.

Note: If the signal is still too weak indoors, try installing your extension antennas (not included in the box) to the SMA connector and placing the antennas outdoors.

Connect to the router via A or B method.
A Wi-Fi: Connect your device to the router’s Wi-Fi using the SSID (network name) and Password printed on the bottom of the router.
B Wired: Turn off the Wi-Fi on your computer and connect it to the router’s LAN port via an Ethernet cable.
Open a browser and follow below pictures to set up the router.
Input the SIM PIN if this window show up (or contact your carrier for help).
Follow below pictures to conﬁgure the router.

Enjoy the internet!

EU Declaration of Conformity

Cudy hereby declares that the device is in compliance with the essential requirements and other relevant provisions of directive 2014/53/EU, directive 2011/65/EU, directive (EU) 2015/863. The original EU declaration of conformity can be found at http://www.cudy.com/ce

www.cudy.com
Email: support@cudy.com
Company: Shenzhen Cudy Technology Co., Ltd

NEED TECH HELP?

www.cudy.com/qr_vg_lt
www.cudy.com
support@cudy.com
www.cudy.com/download