cudy LT500 Wi-Fi 4G Router Installation Guide

: July 23, 2024
: cudy

Table of Contents

cudy LT500 Wi-Fi 4G Router
Product Specifications
Product Usage Instructions
Frequently Asked Questions
INSTALLATION
EU Declaration of Conformity
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

cudy LT500 Wi-Fi 4G Router

cudy-LT500-Wi-Fi-4G-Router-PRODUCT

Product Specifications

Model: 4G Router XXXXX
SIM Card Type: Nano SIM
Connectivity: Wi-Fi, Ethernet
Manufacturer: Shenzhen Cudy Technology Co., Ltd

Product Usage Instructions

Antenna Installation:

If the router has detachable antennas, ensure they are securely installed.

SIM Card Insertion:

Insert your Nano SIM card into the SIM slot with the gold contacts facing down until you hear a clicking sound. Avoid hot-swapping and power off the system before inserting or removing the SIM card.

Power Connection:

Connect the power adapter to the router and wait for the system LED to turn solid on, which may take 2-5 minutes.

LED Indicators:

Check the LED status:

Solid Blue/Purple: Router connected to cellular network
Solid Red: Router needs configuration

Connection Methods:

A. Wi-Fi Connection:
Connect to the router’s Wi-Fi using the SSID and Password printed on the device.

B. Wired Connection:
Turn off Wi-Fi on your device and connect it to the router’s LAN port using an Ethernet cable.

Router Configuration:

Open a browser and enter the provided URL to set up the router following the on-screen instructions.

SIM PIN Input:

If prompted, input the SIM PIN provided or contact your carrier for assistance.

Router Setup:

Follow the on-screen instructions to configure settings such as Timezone, Wireless networks, and APN profiles.

Frequently Asked Questions

Q: What should I do if the system LED is flashing red?

A: If the LED is flashing red, it indicates that the router needs to be configured. Follow the setup instructions provided in the manual to complete the configuration process.

Q: Can I use a different SIM card size other than Nano SIM?

A: No, this router is designed to work with Nano SIM cards only. Using a different size may cause damage to the SIM slot.

INSTALLATION

Install the antennas if there are detachable antennas.
With the gold contacts facing down, Insert your SIM card into the SIM slot until you hear a clicking sound.
Connect the power adapter to the router. Wait for the system LED to turn solid on. This may take 2-5 minutes.

cudy-LT500-Wi-Fi-4G-Router-FIG-1

Check the LED.
- When the system LED is solid blue/purple, the router is connected to the cellular network.
- When the system LED is solid red, please continue to conﬁgure the router.

cudy-LT500-Wi-Fi-4G-Router-FIG-4
Note: If the cellular signal strength is weak, try placing the 4G router near windows and check again.

Connect to the router via A or B method.
- A Wi-Fi: Connect your device to the router’s Wi-Fi using the SSID (network name) and Password printed on the bottom of the router.

cudy-LT500-Wi-Fi-4G-Router-FIG-8

  *  **B Wired:** Turn off the Wi-Fi on your computer and connect it to the router’s LAN port via an Ethernet cable.

Open a browser and follow below pictures to set up the router.

cudy-LT500-Wi-Fi-4G-Router-FIG-10

Input the SIM PIN if this window show up (or contact your carrier for help).
Follow below pictures to conﬁgure the router.

cudy-LT500-Wi-Fi-4G-Router-FIG-13

Enjoy the internet!

www.cudy.com
Email: support@cudy.com
Company: Shenzhen Cudy Technology Co., Ltd

NEED TECH HELP?

EU Declaration of Conformity

Cudy hereby declares that the device is in compliance with the essential requirements and other relevant provisions of directive 2014/53/EU, directive 2011/65/EU, directive (EU) 2015/863. The original EU declaration of conformity can be found at http://www.cudy.com/ce.