MANOVA BT-208S 2 In 1 Wireless Sleeper Speaker Instruction Manual

MANOVA BT-208S 2 In 1 Wireless Sleeper Speaker

OVERVIEW

1. Bluetooth/play/call O button
2. volume +/ Sleeper next track + button
3. volume – / previous track – button
4. Bluetooth LED (under speaker grille)
5. built-in mic. for speakerphone function (under speaker grille)
6. recharge port – USB type-C under the cover
7. LED for charge indication (under speaker grille)
8. detachable clip (behind T-shirt OR pillow case)for wearing OR mount to pillowcase
9. USB type-C recharge cord
10. put the holder ring [8] underneath inside your pillowcase,
11. (turn the speaker with buttons facing yourself for ease of access),
12. Snap the speaker to the holder ring with the pillowcase fabric in between
13. do the other way around step for taking off speaker

Pairing the speaker
( power ON default = ‘Bluetooth Mode’)

• Press & hold Bluetooth/play/call O button 3s for speaker, until hear ‘dondooo .. .’;
• Speakers are turned ON, blue LED flashing fast;
• phone Bluetooth ON, search and select (BT-208S);
• hear tone ‘bu loop’, (speaker Blue LED lit constant);
• now pairing with your phone is successful;

Product Features

• clip to T-shirts OR clip to pillowcase!
• BT wireless speaker mode OR
• sleeper mode white noise auto-play (built-in 17 tracks)
• quick snap detachable
• I PX-6 waterproof
• 3W high-clarity speaker
• handsfree call pick function
• Bluetooth v5.3 wireless

*NOTE If you buy an extra speaker (optional) you can make them a pair of TWS Stereo speakers**

• you need to power ON BOTH speakers together to let them pair themselves first!..
• (In case you had paired only ONE side with your phone before > Delete all previous ‘WRiST’ records from your phone’s Bluetooth list, and then turn the phone Bluetooth OFF, and then ON again to follow the below steps ‘Pairing 2 BT-208S speakers as TWS’ A.-F.

Charging the speaker

1. lift the speaker’s rubber cover, plug the recharge cord into the micro USB type-C end;
2. plug the recharge cord the USB end to a USB power source;
3. RED LED lights up, indicating charging;
4. when fully charged (approx. 1.5 hrs), the LED will turn off (as ‘Bluetooth mode’ wearable speaker) wear on the T-shirt near the shoulder- try carefully first to make sure the clip ring tightness does not damage your T-shirt fabric-you not to not use this wearing method I- we do not bear any responsibility or consequences aroused.]
5. put the the holder ring [8] underneath your T-shirt,
6. (turn the speaker with buttons facing yourself for ease of access),
7. Snap the speaker to the holder ring with the T-shirt fabric in between
8. do the other way around step for taking off speaker

(as ‘Sleeper mode’ speaker) mount on pillow case near your head- rtry carefully first to make sure clip ring tightness not damaging your pillowcase fabric- you opt to not use this mounting method!- we do not bear any responsibility or consequences aroused.

• you need to power ON BOTH speakers together to let them pair themselves first!.
• (In case you had paired only ONE side with your phone before > Delete all previous ‘WRiST’ records from your phone’s Bluetooth list, and then turn the phone Bluetooth OFF, and then ON again to follow the below steps ‘Pairing 2 BT-208S speakers as TWS’ A.-F.

Pairing 2 BT-208S speakers as TWS

• Press & hold Bluetooth/play/call O button  3s for BOTH speakers at the same time, until hear ‘dodooo .. .’;
• Speakers are turned ON, both LEDs flashing fast > then ‘dodu’ sound;
• wait about 5 sec till one speaker automatically paired with the other (hear ‘dodu’, one side LED lit constantly, the other flashing) > ready for pairing with the phone;
• phone Bluetooth ON, search and select (BT-208S);
• hear tone ‘bu loop’, (the other speaker Blue LED lit constant then);
• now pairing with your phone is successful (as a pair of TWS speakers);

[Besides wearing the speakers, you can opt to place the 2 speakers apart 1-2M in between, for desktop use with TWS stereo effect- recommend putting on top soft mat/pad to avoid vibrations on desktop]

Disconnect the speaker

• after power ON (default at ‘Bluetooth mode’),
• double click the +button > hear ‘Sleeper mode’, and auto play 1st white noise track
• double click  the +button again > back to ‘Bluetooth mode’ and blue LED flashing ready for pairing or re-connect to the previous record phone/device

Disconnect the speaker

• switch off the phone’s Bluetooth function,
• the main speaker’s Blue LED will flash fast  then press & hold Bluetooth/play/call O button 6s until hear ‘doolululu’ > OFF, (the pairing memory will be kept there);

Re-connect Phone

• previous phone Bluetooth ON, before turning on the speakers
• Press & hold Bluetooth/play/call O button 3s for speaker, until hear ‘condo .. .’;
• wait 5 sec … hear tone ‘bloop’, (speaker Blue LED lit constant);
• pairing successful again

Pair with another new phone

• switch off the Bluetooth function on your previous phone
• then power on the other/new phone’s Bluetooth function. and then you repeat steps as in above b) to e)

How to use

Play / Pause music

• click Bluetooth/play/call O button • = play (from player’s previous track position)
• click Bluetooth/play/call O again • = pause

Adjust volume
during music playback or call,

• click volume+ /next+ button• = increase volume;
• click volume- /previous- button• = reduce volume. (You may multiple clicks until adjust the volume to the desired level. .. beware not too fast otherwise .. [double clicks] will change to ‘Sleeper mode’)

Next-forward / Previous-backward
during music playback only,

• Press & hold volume+/ next+ button – = next track;
• press & hold volume – / previous – button – = previous track.

during white noise playback (at Sleeper mode)

• Press & hold volume +/ next+ button- = next white noise track;
• press & hold volume – / previous – button- = previous white noise track. (at sleeper mode white noise track autoplay for 30 mins. until auto mute. At any time click • 0 again and play the white noise track for another 30 minutes.)

Call-pick/ end / reject/ redial
[if paired as TWS speakers, only 1 side will work as using handsfree functions with phone calls]

• during incoming call, (if playing music> stop) -> hear ‘ring, ring, ring .. .’
• click Bluetooth/play/call O button=call pick, then talk;
• click Bluetooth/play/cal O again=call end (resume music playing);
• OR Press & hold Bluetooth/play/call O button 1s* = reject call directly (resume music playing)
• at NO incoming call, double click• • Bluetooth/play/call 0 buttons; = redial last no. in call out the history of the phone

17 tracks of White Noise

1. Water stream
2. Beat Machine
3. Forest birdsong
4. Frog chirp
5. Crickets chirp
6. Bugs neighing
7. Thunderstorm
8. Running water
9. Seagulls and waves
10. Wave sound
11. Dripping
12. Heavy rain
13. Rain
14. Morning birds sing
15. Birds sing
16. A flock of birds
17. Tibetan singing bowl

Battery low > recharge

There will be some beeping alert sound during playback. Then charge the speaker as mentioned steps in the above section.

Troubleshooting

If you come across some problem such as

• too many same-speaker pairing names appeared on your phone
• sudden sound dropped and cannot link again to play normally

1. Switch off the speaker,
2. plug and recharge the speaker, until the speaker’s Red LED is off (fully charged),
3. clear/unpair all speaker pairing names from your phone’s list,
4. Turn off Bluetooth from your phone, and then

(Then you can repeat the above steps a)-e) for new pairing again and use … )

Specifications

• Signal-to-noise ratio: >=75db
• Driver max. output: 3W
• Battery charging time: 1.5 hours.
• Product weight: 54g
• Playback time: up to 9.5 hours
• Dimensions: w57xD67x H31mm
• Battery charging current: 500mA max.
• Standby current: <20uA (no pairing 10 min. auto-OFF)
• Built-in 3. N Li-polymer rechargeable battery (*for 1 speaker fully charged, volume at 1/3 level; if in TWS paired playback time -approx. half)

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, under part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used per the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Caution:
Any changes or modifications to this device not explicitly approved by the manufacturer could void your authority to operate this equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

RF Exposure Information
The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions and compliance with exposure requirements.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>