VELOSSA TECH 2019-2022 Toyota Corolla Hatch Big Mouth Ram Air Intake Snorkel Installation Guide
- July 23, 2024
- VELOSSA TECH
Table of Contents
VELOSSA TECH 2019-2022 Toyota Corolla Hatch Big Mouth Ram Air Intake
Snorkel
Product Information
Specifications:
- Compatible Vehicles: 2019-2022 Toyota Corolla Hatch, 2020-2022 Sedan
- Product Name: BIG MOUTH Ram Air Intake
- Installation Time: 2 hours
- Tools Required: Basic hand tools
Product Usage Instructions
Kit Contents:
| Component | Quantity |
|---|---|
| 10mm retainer clip | 1 |
| 7mm retainer clip | 1 |
| Mud skirt retainer clip | 1 |
Stock Components Removal:
It is recommended to search for instructions on how to remove the bumper
specific to your vehicle’s trim.
BIG MOUTH Installation:
There are 3 fastening points with different types of fasteners:
- Left ear : 7mm retainer clip
- Right ear: 10mm retainer clip
- Lower ear: mud skirt clip
Final Assembly Review:
- After installation, review to ensure no parts are binding or causing preload. Adjust if necessary.
- Re-assemble the bumper in the reverse order of removal to complete the installation process.
Frequently Asked Questions (FAQ)
-
How long does it take to install the BIG MOUTH Ram Air Intake?
The installation process typically takes around 2 hours. -
What tools are required for installation?
Basic hand tools are needed for the installation of the BIG MOUTH Ram Air Intake.
Kit Contents (Full Kit)
Please review this document before attempting installation.
You will need basic hand tools and 2 hours of installation time.
Kit Contents
- 10mm retainer clip 1x
- 7mm retainer clip 1x
- Mud skirt retainer clip 1x
INSTALLATION INSTRUCTION
Stock Components Removal
It is best to Google “how to remove bumper” for your particular trim.
BIG MOUTH Installation
There are 3 fastening points that require 3 distinct fasteners. Check out the
graphic below to match each fastener to its fastening point.
Final Assembly Review
Review the install and make sure nothing is binding or causing any preload on
any parts, loosen and retighten if adjustment is necessary.