VELOSSA TECH 2015-2021 Subaru WRX or STI BIG Mouth Ram Air Installation Guide
- June 4, 2024
- VELOSSA TECH
Table of Contents
VELOSSA TECH 2015-2021 Subaru WRX or STI BIG Mouth Ram Air
Kit
Contents (Full Kit)
Please review this document before attempting installation. You will need basic hand tools and 2 hours of installation time.
- M6 x 12mm Cap Screw 1
- M6 Washer 3
- M6 x 20mm Cap Screw 1
- M6 x 3mm Spacer 1
- M6 Split Ring Lock Washer 1
- M6 Lock Nut 1
Stock Components Removal
It is best to google “how to remove bumper” for your particular trim, after
the bumper is removed, you will see the following.
Remove front cross member.
Big Mouth Installation
The BIG MOUTH slides into position as shown, make sure that it is seated
properly over the OEM tab with one hole that is present underneath.
Be patient with this next step, ensure the bolt, OEM hole and BIG MOUTH
fastening point are all lined up, feel for thread engagement and slowly begin
to thread the bolt into the BIG MOUTH.
Install the M6x20mm bolt with washer on the driver side fastening point as
shown.
Once the BIG MOUTH is seated properly and screwed down, you may re-install the
OEM cross member, ensure that the sides of the cross-member tuck behind the
flaps behind the headlights before screwing together.
Final Assembly Review
Review the install and make sure nothing is binding or causing any preload on
any parts, ensure that screws are tight and that your hood can close properly
.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>