VELOSSA TECH 2016-2020+ Infiniti Q60 BIG MOUTH Ram Air Intake Installation Guide
- July 24, 2024
- VELOSSA TECH
Table of Contents
VELOSSA TECH 2016-2020+ Infiniti Q60 BIG MOUTH Ram Air Intake
Specifications
- Product Name: 2016-2020+ Infiniti Q60 BIG MOUTH Ram Air Intake
- Installation Time: 1-1.5 hours
- Tools Required: Basic hand tools
FAQs
- Q: How do I know if I need to relocate the horn for installation?
- A: If you own a Tech package car, follow the specific instructions provided for relocating the horn. For Non-Tech Package Cars, refer to the general installation steps.
- Q: Can I reuse the OEM bolts for installation?
- A: It is recommended not to reuse the OEM bolts. Please use the supplied M6 hardware for a secure installation.
Kit Contents
- Please review this document before attempting installation.
- You will need basic hand tools and about 1-1.5 hours of installation time.
- Please review the table below and make sure you have received the kit contents.
| Description | Qty in kit |
|---|---|
| # | |
| M6 x 30mm socket head cap screw | 5 |
| M6 large washer | 4 |
| M6 small washer | 1 |
| M6 lock nuts | 4 |
| Aluminum spacer | 1 |
Bumper Removal
- Perform a YouTube Search using the term “How To Remove Your Infiniti Q60’s Front Bumper Properly” and follow the steps for bumper removal.
- Once you remove the bumper, please continue with this installation guide.
Big Mouth Installation
- If you DO NOT own a Technology package car, follow this slide by unbolting the horn as shown and relocating it to the screw hole on the crash bar as shown. If you own a Tech package, see next slide.
- If you own a tech package car, follow this slide. Unbolt the horn as shown. Do not re-use the OEM bolt to fasten to the crash bar. Use the supplied M6 hardware.
- Fasten the horn to the crash bar using an M6x30 screw, the small M6 washer, and the aluminum spacer as shown. Choose an orientation of the horn that does not strain the wire loom.
- Insert the Big Mouth in an upward sweeping motion as indicated. Align the holes and use the supplied M6 x 30mm bolts + 6mm large washers (front) and M6 locknuts (rear) to fasten. Turn by hand at first to avoid cross threading, use a 5mm hex key and 10mm wrench for tightening. Install both Big Mouth intakes this way.
Finalize
Re-install the bumper the same way it was removed and ENJOY!
Documents / Resources
|
VELOSSA TECH 2016-2020+ Infiniti Q60 BIG MOUTH Ram Air
Intake
[pdf] Installation Guide
Infiniti Q60 2016-20, 2016-2020 Infiniti Q60 BIG MOUTH Ram Air Intake,
Infiniti Q60 BIG MOUTH Ram Air Intake, Q60 BIG MOUTH Ram Air Intake, BIG MOUTH
Ram Air Intake, Ram Air Intake, Air Intake, Intake
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>