VELOSSA TECH FORD-RANGER-BIGMOUTH-R1 Big Mouth Ram Air Intake Snorkel Installation Guide

July 22, 2024
VELOSSA TECH

VELOSSA TECH FORD-RANGER-BIGMOUTH-R1 Big Mouth Ram Air Intake Snorkel

Specifications

  • Product: 2019-2023 Ford Ranger BIG MOUTH Ram Air Intake
  • Installation Time : 0.5 hours or less
  • Tools Required : Basic hand tools
  • Hardware Included:
    • M6x40mm socket head cap screw x1
    • M6x30mm socket head cap screw x1
    • M6 small washer x2

Product Usage Instructions

Stock Components Removal

Remove the 2 Torx screws using a T30 bit.

Cowl Removal

Pop off the clips carefully and set them aside for later use.

Big Mouth Installation

Remove the two stock bolts using a socket extension. Use a long extension if needed.

Big Mouth Installation

Place the BIG MOUTH in the specified location and use the supplied hardware to fasten it. Do not over-tighten, hand tight is sufficient.

  • 40mm bolt and washer on one side
  • 30mm bolt and washer on the other side

Finalize

Re-install the cowl in the same manner it was removed and enjoy the benefits of the installation.

FAQ

  • Q: Do I need any special tools for this installation?
    • A: You will only need basic hand tools like a socket wrench and a T30 bit for the screws.
  • Q: Can this product be installed on other vehicle models?
    • A: This product is specifically designed for the 2019-2023 Ford Ranger and may not be compatible with other models.

Kit Contents

Please review this document before attempting installation.
You will need basic hand tools and 0.5 hour or less of installation time.
This product does not reuse the OEM hardware

Description Qty in kit

  • M6x40mm socket head cap screw : 1
  • M6x30mm socket head cap screw ; 1
  • M6 small washer: 2

Stock Components Removal

Remove these 2 Torx screws using a T30 bit.

Cowl Removal

Pop off these clips carefully and set them aside for later use.

Big Mouth Installation

Place the BIG MOUTH in the location shown and use the supplied hardware to fasten it. DO NOT OVER-TORQUE, HAND TIGHT IS FINE.

Finalize

Re-install the cowl the same way it was removed and ENJOY!

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

VELOSSA TECH User Manuals

Related Manuals