ITS 696R1 Ava Courtesy Light Installation Guide

July 22, 2024
ITS

ITS 696R1 Ava Courtesy Light

ITS-696R1-Ava-Courtesy-Light-Product

Product Information

Specifications:

  • Product Name: Anya/Ava Courtesy Light
  • Part Numbers: 696R1, 696R3

Product Usage Instructions

Parts/Tools Needed:

  • Courtesy Light
  • Two #8 Pan Head Screws
  • Butt Splice Connectors (not provided)
  • Power Drill (not provided)

Installation Instructions:

  1. Pull the unit’s wiring through and wire using the provided diagram.
  2. Screw in the housing using the provided screws.
  3. To install the light in the housing, line up the tab on the light with the gap in the housing and press down on the opposite corner until it snaps in place.
  4. Wire the light following the wiring diagram provided.

FAQ:

  • Q: What type of power source does the Anya/Ava Courtesy Light require?
    A: The courtesy light requires an incoming 12V DC power source. Ensure to wire it accordingly following the provided wiring diagram.

  • Q: Can I use different screws for installation if I don’t have #8 Pan Head Screws?
    A: It is recommended to use the provided #8 Pan Head Screws for installation to ensure proper fitting and secure mounting of the light housing.

PARTS/TOOLS NEEDED

ITS-696R1-Ava-Courtesy-Light-Fig- \(1\)

IMPORTANT SAFETY INSTRUCTIONS

READ CAREFULLY FOR YOUR PROTECTION AND SAVE ALL INSTRUCTIONS.

  • Disconnect power before installing, adding, or changing any component.
  • To avoid a hazard to children, account for all parts and destroy all packing materials.
  • It is recommended that fuse protection be added to the positive (+) input.

INSTALLATION INSTRUCTIONS

  1. Determine the installation location for your light and drill a ½” hole. Pull the unit’s wiring through and wire using the diagram below right. Screw in the housing using the provided screws.
  2. To install the light in the housing, line up the tab on the light with the gap in housing 1 and press down on the opposite corner until it snaps in place. 2.
  3. Push the bezel in place.
  4. Wire the light following the wiring diagram below.

Warranty

For warranty information please visit www.itc-us.com/warranty-return- policy.

  • 3030 Corporate Grove Dr. Hudsonville, MI 49426
  • Phone: 616.396.1355
  • itc-us.com.

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals