EKSELANS BY ITS MD HD L 4K RC Digital Modulator with Built-in DHMI 4K Loop User Guide
- June 6, 2024
- EKSELANS BY ITS
Table of Contents
- EKSELANS BY ITS MD HD L 4K RC Digital Modulator with Built-in DHMI 4K
- Introduction
- Key features
- Packaging content
- Interfaces and connections
- Diagrama de instalación
- Basic programming using buttons
- Advanced programming using MD HD Soft
- Technical specifications
- Channel and Frequency Table (Standard B/G)
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
EKSELANS BY ITS MD HD L 4K RC Digital Modulator with Built-in DHMI 4K
Loop
Introduction
Digital modulator to COFDM/QAM/ISDB-T. 1 input + HDMI LOOP HDMI 4K. Output frequencies: 170-230MHz + 470- 862MHz. Output level (DIN 45004B): > 80dBμV. RF mix input (5-862MHz). USB recorder / player. USB for programming professional parameters. IR transmitter 33-56 KHz modulated (included). Transmits 5Vdc for TRC powering.
Key features
- Resolution up to 1080p.
- Active HDMI source indication.
- LOOP HDMI IN / OUT.
- Excellent MER modulation quality ≥33 dB.
- Quick menu. Easy adjustment using channel buttons, attenuation, program ID.
- Easy Advanced Programming using PC Program (MDHDSoft).
- Universal infrared extender Allows selection of infrared frequency 30-60KHz.
- High dynamic range IR reception (80dB).
Packaging content
- 1 x MD HD L 4K.
- 1 x Power supply 5V DC 2A.
- 1 x Jack cable to IR.
Interfaces and connections
Interfaces:
- – Buttons for programming.
- Display
- Buttons for programming.
- RF output.
- RF input.
- 5V DC power supply.
- USB Type B for setup.
- HDMI Output (LOOP).
- Micro-USB for FW uploading. 10.- HDMI input.
- IR transmitter.
Diagrama de instalación
- 5.- RF input. Connect antenna signal, to the output we will have that signal with the modulated channel inserted.
- 4.- RF output.
- 6.- Connect 5V DC feeder.
- 7.- Connects to PC in case you need to configure with MD HD SOFT application.
- 8.- HDMI 4K (LOOP) output.
- 9.- The PC is connected if you need to upgrade FW using the DPA Upgrade app.
- 10.- 4K HDMI input.
- 11.- IR transmitter for TRC.
For your convenience, in case you have the modulator near the TV, you could use the RF IN input as an output for the TV.
Basic programming using buttons
Note: If you use more than one modulator for the same receiver or TV, you need to modify the “Program ID” to make them different.
Advanced programming using MD HD Soft
- For advanced programming, download the “MD HD Soft” Software from the website www.ek.plus.
- Connect modulator and computer via USB cable (Type A/Type B).
- Settings RF.
- Video and TS settings.
- This option will be used to adjust some deviation in the video input signal. With some sources (very rare cases), a green band appears to the left of the image. This option will allow you to move this band until it disappears.
- Use in case you do not listen to DD by RF output. Clicking this button will write the EDID table.
- Offset between RF modulated audio and video. -999ms, indicates that the audio is almost 1 second ahead of the video.
Technical specifications
Reference | MD HD L 4K RC | |
---|---|---|
Code | 122016 | |
IN | HDMI 2.0, fully compliant HDCP 2.2 backwards compliant HDMI 1.4 | |
OUT | loop HDMI |
VÍDEO
Video resolution| | 480i@60Hz, 480p@60Hz, 576i@50Hz, 720p@50/60Hz,
1080p@50/60Hz, 1080i@50/60Hz, 4Kx2K@24/30/50Hz
Data rate| | 6Gbps por canal
Video compression| | H.264
Video rate| | 15Mbps
AUDIO
Audio compression| | MPEG1-L2, AAC-LC
Audio rate| Kbps| 128, 192, 256, 320, 384
MODULACION
Resolution Video Output| | 1080p
DVB processing| | NIT, PID
DVB configuration| | NID, ONID, Network name, TSID, PID, Program name, PMT
PID, Video PID, Audio PID
Output frequency| MHz| 170-230 & 470-862
Output channel| N.| 5…12 + 21…69
Output level| dBµV| >80
Attenuation| dB| 0…15
MER| dB| ≥33
Bandwidth| MHz| 6, 7, 8
Constellation| | QPSK, 16QAM, 64QAM
Mode| | 2K, 8K
FEC| | 1/2, 2/3, 3/4, 5/6, 7/8
Guard interval| | 1/4, 1/8, 1/16, 1/32
LCN| | EACEM, ITC, NORDIG
Loop RF| dB| -2
INFRARED EXTENDER
Cable with IR emitter-Freq| KHz| 38-46-56
USB
USB connector| | H.264 *.ts files Record & Play
GENERAL
Supply voltage| Vdc| 5 (RF OUT pass optional)
Power consumption| W| < 5
Size| mm| 170x130x35
Weight| Kg| 0.6
Channel and Frequency Table (Standard B/G)
- Banda III. 7MHz Bandwidth.
- Banda IV – V. 8MHz Bandwidth.
Band | Channel | Start frequency | End frequency | Central frequency |
---|
III
| 5| 174 MHz| 181 MHz| 177,5 MHz
6| 181 MHz| 188 MHz| 184,5 MHz
7| 188 MHz| 195 MHz| 191,5 MHz
8| 195 MHz| 202 MHz| 198,5 MHz
9| 202 MHz| 209 MHz| 205,5 MHz
10| 209 MHz| 216 MHz| 212,5 MHz
11| 216 MHz| 223 MHz| 219,5 MHz
12| 223 MHz| 230 MHz| 226,5 MHz
Band| LTE| Channel| Start
frequency
| End
frequency
| Central
frequency
---|---|---|---|---|---
V
| | 38| 606 MHz| 614 MHz| 610 MHz
| 39| 614 MHz| 622 MHz| 618 MHz
| 40| 622 MHz| 630 MHz| 626 MHz
| 41| 630 MHz| 638 MHz| 634 MHz
| 42| 638 MHz| 646 MHz| 642 MHz
| 43| 646 MHz| 654 MHz| 650 MHz
| 44| 654 MHz| 662 MHz| 658 MHz
| 45| 662 MHz| 670 MHz| 666 MHz
| 46| 670 MHz| 678 MHz| 674 MHz
| 47| 678 MHz| 686 MHz| 682 MHz
| 48| 686 MHz| 694 MHz| 690 MHz
2| 49| 694 MHz| 702 MHz| 698 MHz
2| 50| 702 MHz| 710 MHz| 706 MHz
2| 51| 710 MHz| 718 MHz| 714 MHz
2| 52| 718 MHz| 726 MHz| 722 MHz
2| 53| 726 MHz| 734 MHz| 730 MHz
2| 54| 734 MHz| 742 MHz| 738 MHz
2| 55| 742 MHz| 750 MHz| 746 MHz
2| 56| 750 MHz| 758 MHz| 754 MHz
2| 57| 758 MHz| 766 MHz| 762 MHz
2| 58| 766 MHz| 774 MHz| 770 MHz
2| 59| 774 MHz| 782 MHz| 778 MHz
2| 60| 782 MHz| 790 MHz| 786 MHz
1| 61| 790 MHz| 798 MHz| 794 MHz
1| 62| 798 MHz| 806 MHz| 802 MHz
1| 63| 806 MHz| 814 MHz| 810 MHz
1| 64| 814 MHz| 822 MHz| 818 MHz
1| 65| 822 MHz| 830 MHz| 826 MHz
1| 66| 830 MHz| 838 MHz| 834 MHz
1| 67| 838 MHz| 846 MHz| 842 MHz
1| 68| 846 MHz| 854 MHz| 850 MHz
1| 69| 854 MHz| 862 MHz| 858 MHz
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>