Disney QS-MS02 Dual Mode Wireless Mouse Instruction Manual
- July 22, 2024
- DiSNEY
Table of Contents
Disney QS-MS02 Dual Mode Wireless Mouse
Packing List
Product diagram
Kindly reminder
- Do not attempt to disassemble or replace any parts of the product except for those operations specifically indicated in the instruction manual.
- Do not put the product into water or any other liquid, this product is not waterproof design.
- If any liquid accidentally enters the product, please disconnect and remove the product immediately.
- To avoid electric shock, please make sure there is no water on your hands when installing or uninstalling the product.
- Do not place this product near a heat source or expose it directly to a fire source.
- Do not place this product in an environment with strong electromagnetic force, as this may cause the product to malfunction.
Product Specification
- Mode 2.4G+BT5.0
- Working distance 10M
- Battery capacity 300mAh/3.7V
- Battery Voltage 3.7V
- Charging Voltage 4.2V
- Charging Current 1A MAX
- Charging time 90min
- DPI 1200
- Return rate 125Hz
- Mouse Size 9662.7534.56mm
System Support
The mouse supports pairing with computers with Windows OS 8 and above, Mac OS
10.10 and above and Google Chrome OS installed.
USB receiver installation
Open the USB compartment along the bottom, remove the USB receiver, and finally plug the receiver into your computer’s USB port.
Mouse mode description
Mode Indicator
- 2.46 green light
- BT1 blue light
- BT2 blue light
2.4G mode
Plug the USB receiver into the computer, short press the mode switch button,
switch the mode switch to 2.4G gear can be used directly, factory default 2.4G
mode.
2.4G strong pairing mode
Long press the mode switch button for more than 3 seconds, the mouse will
enter the strong pair code mode, at this time, insert the USB receiver to
complete the connection.
BT mode
- Short press the mode switch button to switch to BT1 or BT2 mode, then long press the mode switch button for more than 3 seconds, the mouse will enter pairing mode.
- Then open the Bluetooth icon at the bottom of the computer desktop, click Add Bluetooth Device, search for the corresponding mouse device name, when it appears, click Pairing, and when it shows connected, you can start to use the mouse.
Mouse Name Description
BT 5.0 Name: Disney BT5.0 Mouse
Battery Indicator
Low battery: flashing red light
Charging : green light always on
Fully charged: green light off
| Name of the Parts | Hazardous Substances |
|---|---|
| Pb | Hg |
| Housing | 0 |
| PCBA | X |
| Accessories | X |
This table is compiled according to SJ/T 11364.
: Indicates that this hazardous substance contained in all of the homogeneous
materials for this part is below the limit requirement in GB/T 26572
: Indicates that this hazardous substance contained in at least one of the
homogeneous materials used for this part is the limit requirement in GB/T
26572.
Environment Friendly Use Period (EFUP)
This logo refers to the period (10 years) during which the hazardous
substances in electronic and electrical products will not Leakor mutate so
that the use of these result in any severe environmental pollution, any bodily
injury [substances] will not or damage to any assets.
Warranty Statement
Disclaimer
This user manual does not have any form of guarantee position expression or
other implication. The mentioned products, specifications and information are
for reference only and the content will also be updated on the web at any time
without additional separate notice.
Warranty Statement
The product attached to this document is guaranteed as follows: If the product
is twelve (12) months from the date of purchase(“Warranty Period”), under
normal conditions of use due to quality defects damaged, can be repaired. Free
repair; free replacement if the manufacturer confirms that it cannot be
repaired; repaired or replaced product. Continue to enjoy the warranty during
the ticket date shall prevailing purchase date chant be determined, el by sale
prevail; if the purchase date cannot be determined, the warranty period shall
be 13 (13) months
If you apply for a warranty, please call the product service hotline first and
execute it in the manner instructed by us. When applying for warranty, you
need to provide an accurate, complete and clearly filled out valid sales
invoice.
The above guarantee does not apply to the following situations:
- Exceeding the validity period of the three packs;
- Altering the warranty card and product code does not match the product body;
- Causes caused by misuse, abuse or improper transportation, use, maintenance or storage obstacles or damage;
- Failure or damage caused by force majeure (such as earthquake, war, disaster, etc.) or accident bad;
- The zipper and tower buckle are damaged due to excessive force;
- Disconnection or tearing caused by excessive load;
- Any damage caused by sharp objects;
- Products with signs of burning of flooding;
- Damage caused by unauthorized disassembly;
- Aging, discoloration, abrasion, rupture and other losses that occur during the normal use of the product.
- If the original identification label of the product is changed or damaged, this guarantee will become invalid.
The completeness and appearance of the product and accompanying materials are
not within the scope of the guarantee. You should check on the spot and raise
objections to any discrepancies.
The above guarantees are all guarantees we make regarding the products, and
rige os that cable i excluded or restricted under the law that affects
consumers.
Service supervision hotline: 400-885-8808
FCC Warnning
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection againstharmful interference in a residential installation. This equipment generates, uses and can radiateradio frequency energy and, if not installed and used in accordance with the instructions, maycause harmful interference to radio communications. However, there is no guarantee thatinterference will not occur in a particular installation. If this equipment does cause harmfulinterference to radio or television reception, which can be determined by turning the equipmentoff and on, the user is encouraged to try to correct the interference by one or more of thefollowing measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution : Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause
undesired operation.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 10 cm between the radiator and your body
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>