TELTONIKA FMC125 4G LTE Cat 1 Tracking Device Accessories Owner’s Manual
- July 20, 2024
- teltonika
Table of Contents
TELTONIKA FMC125 4G LTE Cat 1 Tracking Device Accessories Owner’s Manual
EYE Beacon
BLE Beacon for traceability use cases, delivery tracking, monitoring of various movable objects in logistics (trailers, containers), agriculture (tractor attachments), and constructions (tools and inventory).
- BTSID1
EYE Sensor
Sensors data makes it especially suitable for cold chain refrigerator use cases. The built-in accelerometer can detect item movement or fall events. Magnet detection can be used for wireless open/close detection and notifications such as trailer door events, etc.
- BTSMP1
Teltonika Dual Cam
Teltonika Dual Cam solution is perfect for capturing videos or pictures of the
events that might occur on the road, e.g. crash. Mounted on the vehicle front
window, two cameras are used, front and rear, to record videos before and
after the events, take photos periodically or by request and send all data.
to the server. Besides, the innovative solution ensures the safety of
passengers as recordings are made of what is happening inside the vehicle.
- Teltonika Dual Cam
Teltonika Dual
It is ideal to avoid potential accidents as its camera detects vehicles, pedestrians, bicycles, motorcycles, and lane markings on the roads. ADAS notifies the driver with sound and visual warnings of various events. Safety features are designed to avoid collisions and traffic accidents by offering technologies that alert drivers, fleet managers, and dispatchers to potential collisions or common mistakes on the road by tracking and monitoring events in real-time.
- Teltonika ADAS
LV-CAN200
Access to CAN Bus data enables fleet operators to report on a wide range of information. LV- CAN200 adapter lets you read such essential CAN parameters like: fuel level, odometer, VIN number, fuel consumption, engine RPM, engine temperature and handbrake status. It helps to identify areas of improvement in the vehicle operation to drive down overheads and minimize environmental impact.
- LV-CAN200
ALL-CAN300
Communication network can provide you with a wide range of data that can be used to reduce running costs, improve driver safety, streamline maintenance processes and support environmental responsibility.
- ALL-CAN300
CAN-CONTROL
The most widely used feature of CAN-CONTROL device is the possibility to lock/unlock car remotely and control its windows by using special SMS/GPRS commands. It makes CAN-CONTROL accessory a perfect solution for car sharing and many other use cases.
- CAN-CONTROL
ECAN01
Contactless connection to the CAN bus of the vehicle! It reads can bus data through the isolation of wires without damaging them and forwards signals to tracking device.
- ECAN01
Analog Fuel Sensor
Fuel tracking is one of the key challenges of fleet management. If the vehicle has a factory installed Analog Fuel Sensor, there is a solution that does not require any additional equipment – you can connect the device via AIN to read the fuel data straight from the sensor
- Analog Fuel Sensor
1-Wire Temperature Sensor
Digital temperature sensor probe is based on Dallas DS18B20 sensor. An 8 meter cable length will not require any additional wires for even the most demanding installation places. These sensors operate in wide temperature range from -55°C to 125°C.
- 1-Wire Temperature Sensors
1-Wire TTJ Temperature Sensor
The TTJ communicates over a 1-Wire bus that by definition requires only one data line (and ground) for communication with a central microprocessor. It has an operating temperature range of -55°C to +125°C and is accurate to ±0,5°C over the range of -10°C to +85°C.
- TTJ Temperature sensor
1-Wire I Button Reader
One of the implemented features for fleet management devices is 1-Wire data protocol, which enables connection of I Button. The I Button device is perfect for any application where AVL data needs to travel along with a person or object identification.
- 1-Wire I Button reader
1-Wire RFID Reader
The easy solution for implementing driver authentication using RFID based on DS1990A. Read is able to receive identification data wirelessly from passive transponders (cards, tags, etc.)
- 1-Wire RFID reader
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>