Carplay CPZL OEM System User Manual

Carplay CPZL OEM System User Manual

Product Using Instruction

How to switch the OEM system and the CarPlay system

After cable connection, by long press “MENU” , “C” or “ ” button from knob / iDrive / Touchpad, you can switch the system between the original OEM system and the CarPlay system.

button from console joystick
For Mercedes NTG5.0 (GLC&C-Class W205)| long press “ ” button for 3 seconds form center console handwriting mouse
For Audi| Long press 3 seconds “ Media” or “NAV” button from MMI control or steering wheel control
For Lexus| Long press 3 seconds “ MENU” button from knob control
For Lexus with touchpad| Long press the touchpad 3 seconds
For other cars| For the system switching button, please view the Cable Connection User Manual for detail.

CarPlay Decoder main interface

WiFi antenna and WiFi channel setting

Before use the CarPlay and Android Auto function, please make sure the WiFi antenna has been connected.

Tip: The WiFi antenna cannot be placed close to metal objects. (The WiFi signal will lose if WiFi antenna is close to the metal objects.)

|
---|---

Wifi Channel Setting: Click the “Setup” button from the CarPlay Decoder main interface, go into the WiFi setting and set the WiFi Channel according to the country.

| United States| 6
---|---|---
Europe and other| 36
countries|
China| 149
Note: when change the WiFi channel,you  need  to  reboot  the CarPlaydecoder box.

for Car Play Connection.

Before connect the CarPlay function, if your phone has connected the AirPlay/Android Auto/Autolink, please set the CarPlay as the priority application.

Step 1 Click the Car Play function| Step 2 click the OK to turn off the other application
---|---
|

1. Wireless CarPlay connection
   Step 1: Turn on your Phone WiFi
   Step 3: Allow the CarPlay sync to your phone
   Step 4: Start to use CarPlay function.

2. Wired CarPlay connection
   Connect your phone to the CarPlay decoder by USB cable.

for Android Auto Connection.

Before connect the Android Auto function, it requires your phone to install the Android Auto software.

Before connect the Android Auto function, if your phone has connected the Air Play /Car Play /Auto link, please set the Android Auto as the priority application.

Step 1 Click the Android Auto function| Step 2 click the OK to turn off the other application
---|---
|

1. Wireless Android Auto connection
2. Wired Android Auto connection.
   Connect your phone to the CarPlay decoder by USB cable.

Air Play Connection

Before connect the Airplay function, if your phone has connected the Android Auto /CarPlay /Autolink, please set the Airplay as the priority application.

Step 1 Click the Airplay function| Step 2 click the OK to turn off the other application
---|---
|

Step 1: Turn on your mobile Phone “WiFi”, connect your phone to the decoder box WiFi. The WiFi name of the decoder box is Car**, password is 88888888

Step 2: Click the AirPlay in your iPhone’s menu and start to use the AirPlay function.

Wired Autolink Connection

Before connect the Autolink function, it requires your phone to install the Autolink software.

Before connect the Autolink function, if your phone has connected the AirPlay /CarPlay /Android Auto, please set the Autolink as the priority application.

Step 1 Click the Autolink function| Step 2 click the OK to turn off the other application
---|---
|

Wired Autolink connection
Connect your phone to the CarPlay decoder by USB cable.

Voice Assistant Function

Voice assistant function can help you to control the most commonly used functions by voice, instead of by the joystick control.
For example, if you want to back to car OEM system interface from the CarPlay interface, you can say “hi,Yo, return to car”, don’t need to long press the switching button.

1. Before to use the voice assistant function, you need to turn on this function. Enter the “Voice
   Assistant” menu from the Setup menu , set the “Assistant Enable” and “Voice Enable” into “on” .

2. The voice assistance consists of two parts: activation words + command words.
   The activation word is “Hi Yo”, the command words are as Last song, Return to car, Enter Decoder, Open setup, etc.
   Below are some examples to use the voice assistance function.

3. If you want to back the decoder interface from the CarPlay interface, you can say “Hi Yo, enter decoder.

4. If you want to back to car OEM system interface from the CarPlay interface, you can say “Hi,Yo, return to car”.

5. If you want to open the CarPlay from the decoder main menu interface, you can say “Hi,Yo, open carplay”.
   You can check the command words by enter into the Item List.|
   ---|---

6. Learn the command words. You can set the command words with your words.
   Enter the “Voice Assistant” menu from the Setup menu , then click the “Learn List” and start to set the command words.|
   ---|---

Choose the corresponding command, say your command word into the mic, then repeat it
again, the new command word will replace the old one if the screen show the “successful”

Contact US

Please contact us via the purchase platform, mail or the WhatsApp if you need any help.
Tip:
before contacting us, please help us to collect the following information.

1. the order ID
2. the car model
3. the year of the car
4. screen size of the car
5. the toggle switch setup
6. pictures about the LVDS cable connection
7. the software version (in the CarPlay decoder menu, enter into the “Setting”, choose the “System Version”, you will see the software version.)
   

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
• This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>