Carplay BM-IW Wireless USB Adapter User Manual
- June 30, 2024
- CarPlay
Table of Contents
Carplay BM-IW Wireless USB Adapter
Product Information
Specifications:
- Compliance: FCC Part 15
- Radiation Exposure Limits: FCC approved for uncontrolled environment
- Minimum Distance: 0cm between radiator and user’s body
Product Usage Instructions
Caution: Any changes or modifications to this device not explicitly approved by the manufacturer could void your authority to operate this equipment.
Regulatory Compliance: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation.
Radiation Exposure:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. It should be installed and operated with a minimum
distance of 0cm between the radiator and the user’s body.
Product function introduction
Wireless transmission brings a more convenient connection experience and greatly enhances the owner’s experience of using Car Play.
Product specification parameters
- Power input: 5V 1-2.1A
- Product Power: 0.15W
- Output Resolution: Adaptative Compatible car models and iPhone devices
- Search for the compatible models: https://www.apple.com/ios/carplay/available-models/ Support iphone 6 and later models, software version iOS 10 or above.
Product Connection
If the factory car supports CarPlay connection via USB cable, please plug the product into the USB port in the car. Such USB ports may be marked with CarPlay car icon or smartphone icon. Select CarPlay function in the car system, it will enter the following interface.
Make sure your iphone’s Bluetooth and Wi-fi features are turned on and no other in-car devices are connected. On your iphone, go to “Settings” > “Bluetooth”, in Other Devices list,you will see a Bluetooth device name starting with CarPlayBox, tap to pair, allow permission and tap Use CarPlay to Connect wirelessly.
Version update description
In case your Blustooth can not connect the “ConnectBoxBr”, try to connect the
Wifi “ConnetcBoxB, enter the password *88888888 After connecting to wireless
CarPlay, scan this QR code with your camera or enter 102,168.2.1 in safari to
update firmware. Note that some head units cut off the power to the USB
adapter while updating and leaving the process stuck at 1%. If this is the
case please connect the adapter to a USB port with constant power supply, such
as a computer port.
Note: You need an iphone and open mobile data function to access the browser.
FAQ
Q: Can I modify the device on my own?
A: No, any changes or modifications not approved by the manufacturer could
void your authority to operate the equipment.
Q: What should be the minimum distance between the device and my body?
A: The device should be operated with a minimum distance of 0cm between the
radiator and your body as per FCC guidelines.