Carplay lt Land Rover Multimedia System User Manual
- June 12, 2024
- CARPLAY LT
Table of Contents
Land Rover
Manual
Matters needing attention
-
For your safety, please try not to watch videos and operate machines while driving; When driving, please turn the volume to a level where you can clearly hear outside sounds. Before starting the operation, read this manual and other manuals of the system carefully to understand the safety tips and warning labels in this manual and the machine. After reading this manual, keep it within easy reach for reference at any time.
-
First of all, please pay attention to traffic safety。
-
If you encounter difficulties in operating this system, please park the car in a safe place before operating.。
-
Do not let children operate the machine to avoid personal injury or machine damage，Please follow the traffic rules when using the satellite navigation function。
-
Please don’t ban the use of electronic equipment or it is forbidden to use open flame, such as: gas station, winery, such as strong electromagnetic interference region, otherwise bacause dange
-
Do not maintain, maintain or install the machine by yourself. Do not install or maintain the machine when the power is on. It is very dangerous to install and maintain the machine by personnel who are not trained or inexperienced in installing electronic equipment or vehicle accessories。
-
Do not store or install the machine in direct sunlight, and do not put it in other harmful substance environment, especially the LCD screen. If the LCD screen is just near the air duct of the air conditioner when it is installed, please ensure that the cool air or
hot air does not blow directly to the machine, otherwise it may damage the machine, or even cause person -
Do not use some sharp objects to scratch the display, do not take hard objects to vigorously press, otherwise it will cause damage to the display or touch screen。
-
In order to ensure the normal operation of the machine and prevent fire or electric shock, please do not expose the machine to humid air, let alone sprinkle liquid on the machin
One.Basic operation
-
Start/stop the host：
The machine is turned on when the ACC switch is on。
Turn off the engine and pull out the key will turn off the power supply of the machine。 -
Volume adjustment：
The upper key “Volume.” on the steering wheel button can adjust the volume of the machine.。 -
Backlight brightness adjustment： Adjust the brightness in Brightness Settings in the Settings option
-
Astern camera： When the vehicle is in R gear, the display screen will immediately switch to reverse camera no matter s on or off
-
Application selection：
APP ICONS, music, videos, etc. can be seen in the host panel or by clicking application. On the home page, tap different function ICONS to enter the corresponding interface. For details about each function, see the following chapter. Tap the application sliding page to switch between multiple pages。
-
Mode and play location memory：
Turn off the power and then restart the machine. The system will return to the mode before shutdown. If it is radio, it will continue to listen to the radio station that it has memorized before. If it is music or video, it will continue to recover from the last interrupted position
Two, setting
Tap the Settings icon on the home screen on the touch screen“ ”Enter the
system Settings screen, click the corresponding option to ente
-
Navigation Settings
-
open You can open the navigation path selection function and open the optional map as the main page
-
open You can open the sound Settings, adjust the volume of Android media and navigation volume (Android sound is fixed).
-
open You can turn on the
-
open Turn on brightness
-
open To open the
-
open To open the system Setting
（1）open ，
This is the radar switch
（2）open ， This is the silent state/not silent state when reversing
（3）open You can open the factory Settings. Plea consult the after-sales staff for the password
（4）open This is to restore factory Settings. When the machine is stuck or crashes due to external APP installation, click here to restore the factory default application state
（5）open Manually restart the system -
open You can open the camera Settings option, which camera to install, and the corresponding selection
-
open ， Network Settings can be turned on。
（1）WIFI off stat
（2）WIFI open state, enter the password
to connect
-
open You can see the system version/system information of the local devic
-
open You can open the car while driving to close the screen function, the program will not stop
Applications and functions
1.Bluetooth
Open the home screen You can open the Bluetooth interface, search the
Bluetooth name with your mobile phone, and click Connect
2.music
Open the home screen You can play music/video
3.Carplay
Click the icon on the home screen to enter the Apple Carplay
interface
In addition: after Bluetooth
connection, the machine will automatically jump to the Carplay interface, but
also do not need to operate
4.Multimedia application
This
picture comes with its own application program. Customers can download and
install their favorite application in the browse
Dr System resolution selection
Because the original car system is retained, when the original car can not
display/display incomplete, the resolution needs to be adjusted. The specific
operation is as follows:
Open To open the resolution option As shown in the picture.
Judging method
How to quickly distinguish between
The single screen and double screen
Method of Judgment:
- The display of MODE or other symbols on the upper right of the key panel of the original car is: single screen
- The upper right shows the 2/1 icon: Double Screen
Method of Judgment:
- the finger body can touch the control for: capacitive screen
- The one controlled by stylus or nail stylus is: resistive screen
- The discharge line above the display screen is capacitive screen, and the discharge line on the left is resistive screen
Bosch host selects original vehicle resolution
Steps 1-4 of original vehicle resolution setting: Setting – system setting – factory setting – password 2109 – vehicle model selection – enter the following interface
| Black screen or no contact| 
| First. determine whether
the original vehicle screen is a Resistive screen or a Capacitive screen, and
select accordingly
---|---|---|---
2| The original vehicle has a bock screen. or click to enter the anginal
vehicle. and the machine will restart| 
| Corresponding
selection of single screen / double screen
3| The display of the original vehicle is not centered. and it is left or
right:| 
| Change the original vehicle video
source 1.6, and one of the displays is normal
4| The original vehicle interface. and the buttons have no effect| 1
.The key template must correspond to the original vehicle button.
(The right key navigation and phone are the opposite of the original vehicle.
Ignore them.) Click in. slide up and down, find the corresponding module, and
click to select it
2.After selecting the key template, the keys have no effect Just change the
model 1-7 in turn and return to the original vehicle interface to see if the
key functions work|
After the resolution selection is completed, you can test the Android machine
music. At this time, you need to click the original vehicle interface,
audio/video, click My Music•, dicta, select AUXI Auxiliary, and return to the
Android interface to play music
If there is any problem with debugging, consult after-sales technicians！！！
Precautions for use
- In order to enhance the viewing inside the carriage, the LCD screen of the monitor is exposed. Do not press the LCD screen, otherwise it may cause failure. When tapping the LCD screen, in addition to the touch screen coordinate correction, please be sure to tap with your fingers. Otherwise, you may chafe or get dirt.
- When there is dust or dirt on the monitor on the clean screen, please first cut off the power supply and wipe gently with a soft cloth. When wiping the monitor, please pay attention to avoid being scratched by your nails. Do not use wet rags. Do not use volatile oil, thinner and other
FCC Caution.
§ 15.19 Labelling requirements.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation. § 15.21 Information
to user. Any Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
§ 15.105 Information to the user.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for h
RF warning for Mobile device:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20cm between the radiator & your body.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>