PATPET W1 Laser Light Cat Toy Instruction Manual

PATPET W1 Laser Light Cat Toy

Product Information

Specifications:

• Product Name: Laser Light/Cat Toy
• Power Supply: 4 AA Batteries or 5V USB Power Supply
• Automatic Timer: Shuts down after 15 minutes, turns on after 1.5 hours

Product Usage Instructions

Toy Assembly:
No assembly is required. Simply install batteries or connect to USB power supply (5V voltage), press power button, and place the toy on the floor to use.

Battery Installation:

1. Open the battery door located on the bottom of the toy.
2. Insert 4 AA batteries into the battery compartment.
3. Close the battery door securely.

Operating Instructions:

Automatic Mode:

• Press power button to turn on the toy.
• Place the toy on a safe, flat surface.
• To turn off the toy, press the power button while in working state.

Manual Mode:

1. Press the power button three times to start.
2. Hold the toy in your hand and aim it wherever you like to create laser patterns.
3. The toy will automatically turn off after 15 minutes.
4. To turn off the toy while in working state, press the power button.

In both Automatic and Manual Modes, you can adjust the mirror to aim the laser across different surfaces.

Automatic Timer:
The toy will shut down and go to sleep after working for 15 minutes. After 1.5 hours, it will turn on and work for 15 minutes automatically. To start the toy in dormant state or close it in working state, press the power button.

FAQ:

• Q: Can the toy be used with rechargeable batteries?
  A: No, do not use rechargeable batteries with this product. Use only standard or alkaline batteries.

• Q: What should I do if my pet exhibits unusual behavior while playing with the toy?
  A: Immediately discontinue use of the product and consult with a veterinarian before resuming use.

IMPORTANT SAFETY INFORMATION

• WARNING CAUTION, used with the safety alert symbol, indicates a hazardous situation which, if not avoided, could result in minor or moderate injury.
• CAUTION, used without the safety alert symbol, Indicates a hazardous situation which, if not avoided, could result in harm to your pet.
• CAUTION NOTICE, is used to address safe use practices not related to personal injury.
• CAUTION LASER RADIATION.Risk of exposure. Laser radiation is emitted from this product.Please read all safety labels affixed to the product.
• Do not look into the laser beam or the laser beam reflection.
• Do not aim the laser beam at a person.
• Avoid direct eye contact with the laser beam.
• if exposed, close eyes immediately and divert eyes away from laser beam.
• Changes to the laser equipment are, not permitted.

Follow the instructions provided in the operating guide.

• Use of controls or adjustments or performance of procedures other than those Specified here in may result in hazardous radiation exposure.
• Keep away from children.
• Not intended as a Toy for children.
• Do not allow small children to use this product to play with your pet without adult supervision.
• Do not aim the laser beam directly into the eyes of a pet.
• Supervise pet while playing with this product.
• If you notice your per exhibiting unusual behaviour, immediately discontinue use of product.
• Consult with a veterinarian before resuming use of product.
• Do not place the toy on any surface other than a flat, level floor.
• Inspect this product periodically for damage and discard product
• immediately if it appears worn or broken.
• Do not mix old and new batteries.
• Do not mix standard, alkaline or rechargeable batteries.
• Do not use rechargeable batteries.
• Exhausted batteries should be removed immediately.
• Do not dispose of
• batteries with Household waste.
• USB power supply must be 5V voltage.
• These instructions must be retaining and passed on with owner shop.

Toy Assembly
No assembly is required Simply install batteries or connect to USB power supply(5V voltage), press power button and place the Toy on the floor to use.

Customer Care
please contact your local retailer or distributor with any set-up or technical difficulties.

Connect to USB Power Supply Access 5V voltage USB power supply.

Battery Installation

1. Open the battery door which is located on the bottom of the toy.
2. Insert 4 AA batteries into the battery compartment.
3. Close the battery door.

Operating Instructions

Automatic Mode

• Press power button to turn on the toy.
• Set on safe, flat surface such as table.
• In working state, press power button to turn off the toy.

Manual Mode

• Press the power button three times to start.
• Hold the toy in your hand and aim it wherever you like to create your own laser patterns.
• The toy will automatically turn off after 15 minutes.
• In working state, press power button to turn the toy off.
• In Automatic or Manual Mode, you can adjust the mirror to aim the laser across a variety of surfaces.

Automatic Timer

The toys will automatically shut down and go to sleep after working for 15 minutes. After 1.5 hours, the toys will turn on and work for 15 minutes by themselves, and so on. Press the power button to start the toy in the dormant state. Press the power button to close the toy in the working state.

Terms of Use and Limitation of Liability

1. Terms of Use Use of this product is subject to your acceptance without modification of the terms, conditions and notices contained herein. Use of this product Implies acceptance of all such terms, conditions and notices. If you do not wish to accept these terms, conditions, and notices,do not use this product.
2. Proper Use If you are unsure whether this is appropriate for your cat, please consult your veterinarian or certified trainer, contact our customer care center.
3. No Unlawful or Prohibited Use This product is designed for use with cats only. This Pet training device is not intended to harm, injure or provoke. Using this Product in a way that is not Intended could result in violation of Federal, State or local laws.

The device has been approved for use in EU countries and is therefore provided with the CE mark. All necessary documentation is available on the website: www.electric-collars.com Changes to technical parameters, properties and printing errors reserved.

Service center and distribution
Reedog, sro
Sedmidomky 459/8 101
00 Prague 10
Phone: +1 646 980 4569
Email: info@electric-collars.eu

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>