rizoma PT061 Porta Targa Multifit Instruction Manual
- July 20, 2024
- rizoma
Table of Contents
rizoma PT061 Porta Targa Multifit
Specifications:
- Product Name: Porta targa License plate
- Part Number: PT061
- Time of Assemblage: 10-15 minutes
Product Information:
Rizoma products are designed with high-quality materials and precision
engineering to enhance the aesthetics and functionality of your motorcycle. It
is important to follow the provided instructions for proper installation and
maintenance to ensure the safety and performance of the product.
Product Usage Instructions:
Before you start
We are pleased to welcome you into the world of RIZOMA, and we congratulate
you for your excellent choice. Please carefully follow the instructions in
this guide, which will allow you to mount and use the product correctly and
enjoy all the features it has. For your protection and safety, RIZOMA
expressly recommends that you have the installation of the product performed
by skilled personnel. Improper installation, repair or maintenance, can cause
accidents. Keep this user guide as a reference for the future. RIZOMA accepts
no liability for any damage, of any kind, which may be caused, directly or
indirectly, to persons or things as a result of incorrect assembly or failure
to observe all the assembly instructions. We also invite you to comply with
the provisions of the Highway Code and Traffic rules and/or to additional
regulations in force in your Country.
Attention: This component comes assembled for shipping purposes only.
Tighten all fasteners to appropriate torque specifications before riding.
Descriptions preceded by this symbol contain information, instructions, or
procedures, which, if not followed, may result in death or serious injury.
- Carefully read, understand and follow these instructions, they are an essential part of the product. If you have any doubt whatsoever regarding the installation or use of your RIZOMA product, please see your authorized RIZOMA dealer for assistance (on www.rizoma.com).
- For correct installation, all tightening has to be done after the correct positioning of the accessories without restricting the moving parts, to not compromise the correct functioning of the product.
- After installing any Rizoma product, please check that all related components of the motorbike function e.g. brakes, throttle, clutch, lights and steering. We strongly suggest to repeat these checks periodically, especially after long trips or prolonged periods of not using the bike. Your RIZOMA products require regular inspection and maintenance. The more you ride the more often you must inspect your RIZOMA products. If your products are leaking, bent, deformed, cracked, chipped or worn, no matter how slight, immediately have a RIZOMA dealer inspect the products before you ride again. In any case never try to repair or modify the Rizoma products or their components, always replace with Rizoma original components. Rizoma products may not be compatible with your motorcycle or with other aftermarket equipment installed before. For your safety Rizoma suggests to always contact your RIZOMA dealer.
- O.E.M.: original equipment manufacturer.
PART NUMBER: PT061
To comply with the TÜV and European Norm in force, installation of the license
plate must be carried out as the enclosed instructions. Consult the website
www.rizoma.com, in FOX license plate support section
click “DOWNLOAD” to download the PDF document approval ABE.
PART LIST
Before you start mounting the product please check the completeness of the
kit on the part list. The difficulty level and the time of assemblage shown do
not include the removal of OEM components.
Warning: Make sure that your motorbike is standing firmly before you
start work, as a fall may lead to damage to the motorbike or injury to you or
others, also make sure that the temperature of the exhausts and the engine are
similar to the ambient temperature.
WARNING: TO CLEAN YOUR LICENSE PLATE DON’T USE DETERGENT, AGGRESSIVE
PRODUCTS OR ABRASIVE SPONGE THAT CAN DAMAGE OR SCRATCH YOUR LICENSE PLATE, BUT
USE ONLY NEUTRAL DETERGENT WITH COLD WATER.
Improper installation could damage the electrical system of the motorcycle and cause a fire, resulting in personal injury or death. Electrical shock hazard. Disconnect the battery before starting to install turn license plate bracket or rear light or the turn signals. The pins must always be isolated and respect the polarity in the connections. The warrantee is not valid for any electric wires cutting or any product modify or tampering.
Installation:
- Ensure all components are compatible with your motorcycle.
- Position the accessories correctly before tightening any screws.
- Check that all related components of the motorbike function properly after installation.
- Regularly inspect and maintain the product, especially after long trips or periods of non-use.
INSTALL PLATE FOR MEDIUM
- Step 1: INSTALL PLATE FOR MEDIUM/LARGE LICENSE PLATE
- Step 2: INSTALL PLATE FOR SMALL LICENSE PLATE
**** - Step 3: MOUNTING SOLUTION
- Step 4: TIGHTENING
WARNING: TIGHTEN THE SCREWS, CHECKING THAT THE LICENSE PLATE IS IN THE CORRECT POSITION IN ACCORDANCE WITH EUROPEAN NORM IN FORCE. - Step 5: INSTALL LICENSE PLATE
WARNING: IN ACCORDANCE WITH CURRENT EUROPEAN REGULATIONS, INSTALL THE LICENCE PLATE AS IN THE PICTURE. THE LICENCE PLATE MUST BE INSTALLED WITH A MAXIMUM OPENING OF 30° TO THE AX/S PERPENDICULAR TO THE GROUND. - Step 6: INSTALL TURN SIGNALS
- Step 7: INSTALL TURN SIGNALS
- Step 8: ELECTRIC CONNECTIONS
- WARNING: CONTROL THAT IS THE BATTERY DISCONNECT
- WARNING: FOR CORRECT INSTALLATION OF LICENSE PLATE LIGHT FOLLOW
- THESE STEPS: RESPECT THE POLARITY IN THE CONNECTIONS AND ALWAYS CHECK THAT THE TERMINALS ARE ISOLATED.
- WARNING: CONTROL THAT IS THE BATTERY DISCONNECT
Warnings
RIZOMA reserves the right, in its sole discretion, to make changes to the
product and this information at any time and without prior notice. Although
many catalogs and advertisements depict riders engaged in extreme or stunt
riding, this activity is extremely dangerous, increases the risk of an
accident, and increases the severity of any injury. The action depicted is
performed by professionals under strictly controlled riding conditions. Only
you know the limits of your riding ability and only you can control the
conditions under which you ride. By and in consideration for his/her purchase
and use of the RIZOMA product, the user expressly recognizes and agrees that
in the event of any claim arising out of the use of this RIZOMA product,
whether such claim is based in contract, warranty, tort (personal injury or
wrongful death) or otherwise, the laws of the Republic of Italy shall apply
and jurisdiction and venue for any such action shall be in the Courts of Busto
Arsizio, Italy. All riders are strongly urged to take a motorcycle rider
safety clinic. Always wear a properly fitted and fastened motorcycle helmet
(RIZOMA recommends a full face helmet), that has been approved by ANSI ,
SNELL, CE, or any other relevant authority, and any other safety equipment
necessary for your riding style, such as full finger gloves, boots, and body
armor. Be sure to read and follow all the instructions and warnings that
originally accompanied your motorcycle, as well as the literature that
accompanied any other component parts installed on your motorcycle. Be sure
that your tires are inflated to the correct pressure and that there is no
damage whatsoever in the tread or sidewall of the tire.
Legal notes
Some of our products may not be approved for road circulation in the countries
where homologation is required. Thus RIZOMA® srl declines any responsibility
for a different use of its products.
Maintenance:
Inspect your Rizoma products regularly. If you notice any leaks, bends,
cracks, or other damage, have a Rizoma dealer inspect the product before
further use. Do not attempt to repair or modify the product on your own.
Frequently Asked Questions (FAQ):
Q: Are Rizoma products compatible with all motorcycles?
A: Rizoma products may not be compatible with all motorcycles or aftermarket
equipment. It is recommended to consult your Rizoma dealer for compatibility
before installation.
Q: How often should I inspect my Rizoma products?
A: Regular inspections are recommended, especially after long trips or periods
of non-use. If you notice any damage, have a Rizoma dealer inspect the product
immediately.