PEDROLLO TWO CHANNEL BC Submersible Pumps User Guide
- July 26, 2024
- pedrollo
Table of Contents
- PEDROLLO TWO CHANNEL BC Submersible Pumps
- INCLUDES
- PERFORMANCE RANGE
PEDROLLO TWO CHANNEL BC Submersible Pumps
USER GUIDE
BC: The Ultimate Pump for Demanding Conditions and Maximum Performance
- Sewage
- Domestic use
- Civil use
- Industrial use
INCLUDES
※ Power cable length:
– 5 m for BC 10
– 10 m for BC 15 and BC 20
※ Float switch (exclusive to single-phase models)
PERFORMANCE RANGE
- Flow rate up to 850 l/min (51 m³/h)
- Head up to 17 m
INSTALLATION AND USE
BC submersible pumps are designed to drain dirty and sewage water in domestic, civil, and industrial settings. Featuring a TWO-CHANNEL stainless steel impeller, they can efficiently pump liquids containing suspended solids up to 50 mm in diameter with short fibers and handle wastewater, sewage, surface water, and sludge-mixed wa-ter in residential properties.
The TWO-CHANNEL impeller provides excellent per-formance and high energy efficiency, generating in-creased pressure for pumping solids up to 50 mm in diameter, making it the best choice for wastewater drainage.
APPLICATION LIMITS
- Depth below water level up to 5 m (with an appropriately sized power cable)
- Liquid temperature up to +40 °C
- Capable of processing suspended solids up to Ø 50 mm
- Minimum immersion for continuous service:
– 290 mm for BC 10/50
– 330 mm for BC 15/50
– 360 mm for BC 20/50
AVAILABLE UPON REQUEST
※ Pumps with 10 m power cable for BC 10
※ Different voltage requirements 60 Hz frequency
PATENTS – TRADE MARKS – MODELS
- Patent No. EP2313658
- Patent No. IT0001428923
CURVES AND PERFORMANCE DATA
ABSORPTION
Technical data
DIMENSIONS AND WEIGHT
MATERIALS AND COMPONENTS
Specifications
- Application: Drain dirty and sewage water
- Impeller Type: TWO-CHANNEL stainless steel
- Max. Solids Size: Up to 50 mm in diameter
- Power Cable Length: Varies by model
- Voltage: 230V (single-phase), 400V (three-phase)
Product Usage Instructions
Installation
1. Ensure the pump is placed in a suitable location for submersion.
2. Connect the power cable to the appropriate power source as per the voltage requirement.
3. Make sure the pump is securely positioned to avoid movement during operation.
Operation
1. Submerge the pump into the water or liquid to be drained.
2. Turn on the power source to activate the pump.
3. Monitor the pump operation to ensure proper drainage and performance.
Maintenance
1. Regularly inspect the pump for any signs of damage or wear.
2. Clean the impeller and pump components to prevent clogging and maintain efficiency.
3. Check the power cable for any fraying or damage and replace if necessary.
FAQ
Q: What is the maximum solids size the pump can handle?
A: The pump can efficiently handle solids up to 50 mm in diameter with short fibers.
Q: What is the voltage requirement for the pump?
A: The voltage requirement varies by model, with single-phase models requiring 230V and three-phase models requiring 400V.