PEDROLLO BC-MF Microcast Stainless Steel Submersible Pumps User Guide
- July 25, 2024
- pedrollo
Table of Contents
BC-MF
Stainless steel submersible pumps
TWO-CHANNEL
BC-MF Microcast Stainless Steel Submersible Pumps
| Clean water
---|---
| Domestic use
| Civil use
| Industrial use
※ Experience high-efficiency, quality, and durability
※ Constructed entirely from stainless steel, BC-ST submersible pumps offer
superior corrosion and abrasion.
PERFORMANCE RANGE
- Flow rate up to 850 l/min (51 m3/h)
- Head up to 17 m
INSTALLATION AND USE
BC-MF stainless steel submersible pumps are designed to drain dirty and sewage water in domestic, civil, and industrial settings. Featuring a TWO-CHANNEL impeller, they can efficiently pump liquids containing suspended solids up to 50 mm in diameter with short fibers and handle wastewater, sewage, surface water, and sludge-mixed water in residential properties.
※ The hydraulic configuration of the volute and TWO-CHANNEL impeller results from advanced fluid dynamics calculations, delivering superior performance and efficiency for notable energy savings.
※ The TWO-CHANNEL impeller provides excellent performance and high energy efficiency, generating in-creased pressure for pumping solids up to 50 mm in diameter, making it the best choice for wastewater drainage.
INCLUDES
※ Power cable length 10 m
※ Float switch (exclusive to single-phase models)
APPLICATION LIMITS
- Depth below water level up to 5 m (with an appropriately sized power cable)
- Liquid temperature up to +40 °C
- Capable of processing suspended solids up to Ø 50 mm
- Minimum immersion for continuous service:
– 290 mm for BC 10/50-ST
– 330 mm for BC 15/50-ST
– 360 mm for BC 20/50-ST
AVAILABLE UPON REQUEST
※ Different voltage requirements 60 Hz frequency
PATENTS – TRADE MARKS – MODELS
- Patent No. EP2313658
- Patent No. IT0001428923
CURVES AND PERFORMANCE DATA
Q = Flow rate
H = Total manometric head
Performance curves comply with EN ISO 9906 Grade 3B tolerance limits.
ABSORPTION
| TYPE | VOLTAGE |
|---|---|
| Single-phase | 230 V |
| BCm 10/50-MF | 5.5 A |
| BCm 15/50-MF | 8.0 A |
| BCm 20/50-MF | 10.0 A |
| TYPE | VOLTAGE |
|---|---|
| Three-phase | 400 V |
| BC 10/50-MF | 2.2 A |
| BC 15/50-MF | 3.1 A |
| BC 20/50-MF | 3.9 A |
Technical data
DIMENSIONS AND WEIGHT
PALLET CAPACITY
| TYPE | NO. OF PUMPS |
|---|---|
| Single-phase | Three-phase |
| BCm 10/50-MF | BC 10/50-MF |
| BCm 15/50-MF | BC 15/50-MF |
| BCm 20/50-MF | BC 20/50-MF |
MATERIALS AND COMPONENTS
| 1 | Pump body | AISI 304 stainless steel with ISO 228/1 threaded port |
|---|---|---|
| 2 | Base | Stainless steel AISI 304 |
| 3 | Impeller | TWO-CHANNEL type in micro-cast AISI 304 stainless steel. |
| 4 | Motor sleeve | Stainless steel AISI 304 |
| 5 | Motor cover | AISI 304 stainless steel for BC 10/50-ST |
Cast iron with cataphoresis treatment for BC 15/50-ST, BC 20/50-ST
6| Motor shaft| Stainless steel AISI 431
7| Double mechanical seal in oil chamber
Seal| Shaft| Location| Materials
MG1-14D SIC| Ø 14 mm| Motor side| Silicon carbide /Graphite / NBR
Pump side| Silicon carbide/Silicon carbide/NBR
8| Capacitor| (exclusive to single-phase models)
9| Electric motor| BCm- MF: single-phase 230 V – 50 Hz with winding integrated
thermal motor protection
BC-MF: three-phase 400 V – 50 Hz
– Insulation: class F
– Protection rating: IP X8
10| Power cord| Power cable encapsulated with epoxy resin both in the grommet
area and where the conductors exit the sheath, for absolute insulation against
moisture and water.
Type ‘H07 RN-F’ (Schuko plug exclusive to single-phase models)
※ Standard length 10 metres
11| Float switch| (exclusive to single-phase models)
12| Tilting device for the float cable| (exclusive to single-phase models)
Patent No. IT0001428923
13| Power cable strain relief| Patent No. EP2313658
SEWAGE LIFTING SYSTEM KIT VX-ST – BC-MF
VERSION WITH HORIZONTAL DELIVERY AND ¾” GUIDE PIPES
| For VX /35-MF | CODE ASSPVX35ST | DN 2″ |
|---|---|---|
| For VX /50-MF , BC /50-MF | CODE ASSPVX50ST | DN 2″ |
※ Kit consisting of: VERSION WITH VERTICAL DELIVERY AND ¾” GUIDE PIPES
| For VX /35-MF | CODE ASSPVX35STV | DN 2½” |
|---|---|---|
| For VX /50-ST, BC /50-MF | CODE ASSPVX50STV | DN 2½” |
※ Kit consisting of:
ACCESSORIES AVAILABLE FOR ORDER
RUNNING GUIDE
| ※For VX /35-MF | CODE ASSFL005 |
|---|---|
| ※ For VX /50-MF , BC /50-MF | CODE ASSFL006 |
Complete with ring nut and gasket
GUIDE TUBE SUPPORT
| ※ For Ø ¾ ” guide tubes | CODE 859SV340INTFA |
|---|
To ensure stability, insert a support every 2 metres along the guide tube
GUIDE TUBE (AISI 304 stainless steel)
| ※ 2 metres Ø ¾” guide tube | CODE 54SARTG0052F |
|---|---|
| ※ 3 metres Ø ¾” guide tube | CODE 54SARTG0053F |
| ※ 6 metres Ø ¾” guide tube | CODE 54SARTG0056F |
DIMENSIONS (Version with horizontal outlet)
DIMENSIONS (Version with vertical delivery)
Documents / Resources
|
PEDROLLO BC-MF Microcast Stainless Steel Submersible
Pumps
[pdf] User Guide
BCm 10-50-MF BCm 15-50-MF, BCm 20-50-MF, BC-MF Microcast Stainless Steel
Submersible Pumps, BC-MF, BC-MF Submersible Pumps, Microcast Stainless Steel
Submersible Pumps, Microcast Submersible Pumps, Stainless Steel Submersible
Pumps, Submersible Pumps, Pumps
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>