PEDROLLO TWO CHANNEL BC-ST Stainless Steel Submersible Pumps User Guide

July 25, 2024
pedrollo

BC-ST
Stainless steel submersible pumps
TWO-CHANNEL

TWO CHANNEL BC-ST Stainless Steel Submersible Pumps

| Clean water
---|---
| Domestic use
| Civil use
| Industrial use

※ Powerful and robust highefficiency pumps made entirely of stainless steel
※ Constructed entirely from stainless steel, BC-ST submersible pumps offer superior corrosion and abrasion.

PERFORMANCE RANGE

  • Flow rate up to 850 l/min (51 m3/h)
  • Head up to 17 m

INSTALLATION AND USE

BC-ST stainless steel submersible pumps are designed to drain dirty and sewage water in domestic, civil, and industrial  settings. Featuring a TWO-CHANNEL impeller, they can efficiently pump liquids containing suspended solids up to 50 mm in diameter with short fibers and handle wastewater, sewage, surface water, and sludge-mixed  water in residential properties.

※ The hydraulic configuration of the volute and TWO-CHANNEL impeller results from advanced fluid  dynamics calculations, delivering superior performance and efficiency for notable energy savings.

※ The TWO-CHANNEL impeller provides excellent performance and high energy efficiency, generating in-creased pressure for pumping solids up to 50 mm in diameter, making it the best choice for wastewater drainage.

INCLUDES

※ Power cable length 10 m
※ Float switch (exclusive to single-phase models)

APPLICATION LIMITS

  • Depth below water level up to 5 m (with an appropriately sized power cable)
  • Liquid temperature up to +40 °C
  • Capable of processing suspended solids up to Ø 50 mm
  • Minimum immersion for continuous service:
    – 290 mm for BC 10/50-ST
    – 330 mm for BC 15/50-ST
    – 360 mm for BC 20/50-ST

AVAILABLE UPON REQUEST

※AISI 316L stainless steel pump shaft
※ Different voltage requirements 60 Hz frequency

PATENTS – TRADE MARKS – MODELS

  • Patent No. EP2313658
  • Patent No. IT0001428923

CURVES AND PERFORMANCE DATA

Q = Flow rate
H = Total manometric head
Performance curves comply with EN ISO 9906 Grade 3B tolerance limits.

ABSORPTION

TYPE VOLTAGE
Single-phase 230 V
BCm 10/50-ST 5.5 A
BCm 15/50-ST 8.0 A
BCm 20/50-ST 10.0 A
TYPE VOLTAGE
Three-phase 400 V
BC 10/50-ST 2.2 A
BC 15/50-ST 3.1 A
BC 20/50-ST 3.9 A

Technical data

DIMENSIONS AND WEIGHT

PALLET CAPACITY

TYPE NO. OF PUMPS
Single-phase Three-phase
BCm 10/50-ST BC 10/50-ST
BCm 15/50-ST BC 15/50-ST
BCm 20/50-ST BC 20/50-ST

MATERIALS AND COMPONENTS

1 Pump body AISI 304 stainless steel with ISO 228/1 threaded port
2 Base Stainless steel AISI 304
3 Impeller TWO-CHANNEL type in micro-cast AISI 304 stainless steel.
4 Motor sleeve Stainless steel AISI 304
5 Motor cover AISI 304 stainless steel for BC 10/50-ST

Cast iron with cataphoresis treatment for BC 15/50-ST, BC 20/50-ST
6| Motor shaft| Stainless steel AISI 431
7| Double mechanical seal in oil chamber
Seal| Shaft| Location| Materials
MG1-14D SIC| Ø 14 mm| Motor side| Silicon carbide /Graphite / NBR
Pump side| Silicon carbide/Silicon carbide/NBR
8| Capacitor| (exclusive to single-phase models)
9| Electric motor| BCm-ST: single-phase 230 V – 50 Hz with winding integrated thermal motor protection
BC-ST: three-phase 400 V – 50 Hz
– Insulation: class F
– Protection rating: IP X8
10| Power cord| Power cable encapsulated with epoxy resin both in the grommet area and where the conductors exit the sheath, for absolute insulation against moisture and water.
Type ‘H07 RN-F’ (Schuko plug exclusive to single-phase models)
※ Standard length 10 metres
11| Float switch| (exclusive to single-phase models)
12| Tilting device for the float cable| (exclusive to single-phase models)
Patent No. IT0001428923
13| Power cable strain relief| Patent No. EP2313658

SEWAGE LIFTING SYSTEM KIT VX-ST – BC-ST
VERSION WITH HORIZONTAL DELIVERY AND ¾” GUIDE PIPES

For VX /35-ST CODE  ASSPVX35ST DN 2″
For VX /50-ST , BC /50-ST CODE  ASSPVX50ST DN 2″

※ Kit consisting of: VERSION WITH VERTICAL DELIVERY AND ¾” GUIDE PIPES

For VX /35-ST CODE  ASSPVX35STV DN 2½”
For VX /50-ST, BC /50-ST CODE  ASSPVX50STV DN 2½”

※ Kit consisting of:

ACCESSORIES AVAILABLE FOR ORDER

RUNNING GUIDE

※For VX /35-ST CODE  ASSFL005
※ For VX /50-ST , BC /50-ST CODE  ASSFL006

Complete with ring nut and gasket
GUIDE TUBE SUPPORT

※ For Ø ¾ ” guide tubes CODE  859SV340INTFA

To ensure stability, insert a support every 2 metres along the guide tube
GUIDE TUBE (AISI 304 stainless steel)

※ 2 metres Ø ¾” guide tube CODE  54SARTG0052F
※ 3 metres Ø ¾” guide tube CODE  54SARTG0053F
※ 6 metres Ø ¾” guide tube CODE  54SARTG0056F

DIMENSIONS (Version with horizontal outlet)

DIMENSIONS (Version with vertical delivery)

Documents / Resources

| PEDROLLO TWO CHANNEL BC-ST Stainless Steel Submersible Pumps [pdf] User Guide
BCm 10-50-ST, BC 10-50-ST, BCm 15-50-ST, BC 15-50-ST, BCm 20-50-ST, BC 20-50-ST, TWO CHANNEL BC-ST Stainless Steel Submersible Pumps, TWO CHANNEL BC- ST, TWO CHANNEL, BC-ST, Stainless Steel Submersible Pumps, TWO CHANNEL Stainless Steel Submersible Pumps, BC-ST Stainless Steel Submersible Pumps, Stainless Steel Submersible Pumps, Stainless Steel Pumps, Submersible Pumps, Pumps
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals