SOLIGHT WPH-150W-006 150W DALI LED High Bay Instruction Manual

: July 17, 2024
: Solight

Table of Contents

SOLIGHT WPH-150W-006 150W DALI LED High Bay
Product Usage Instructions
Installation
TECHNICAL PARAMETERS
INSTALLATION
FAQ
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

SOLIGHT WPH-150W-006 150W DALI LED High Bay

Specifications

Model: CZ WPH-150W-006 LED High Bay 150W DALI
Input Voltage: AC90~305V
Color Rendering: Not specified
Power: 150W
Material: Not specified
Luminosity: Not specified
Operating Temperature: Not specified
Chromaticity: Not specified
Dimensions of the Luminaire: Not specified
Beam Angle: Not specified
Protection: Not specified

Product Usage Instructions

Warning

Read the operating instructions carefully before installation.
Only have a qualified person in the field or a professional technician install the luminaire.
Before installation, check that the local voltage range matches the luminaire’s operating voltage.
If the luminaire is damaged, it should be replaced by the supplier, a service representative, or a qualified person.
Protect the luminaire from fire, overvoltage, and vibration.
Take extra care to avoid fire or electric shock.

Installation

Drill a hole in the ceiling and install the hook. Hang the light fixture.
Connect the supply cable. Brown – L, Blue – N, Yellow/Green – ground. Ensure waterproof processing.

Dimensions

Label DALI: dimming

Wiring Diagram:

Brown –L-Blue –N-Yellow/ –PE-Green-Purple dimming Pink dimming

The light source of this luminaire is non-replaceable. At the end of its service life, the entire luminaire must be replaced and disposed of in a designated place. This product contains a light source that for design reasons cannot be removed for verification therefore the entire product is considered a light source. The power cord cannot be replaced if damaged; the unit must no longer be used. The product has been issued with a CE declaration of conformity by the applicable regulations. Contact the manufacturer for more information.

LED High Bay 150W DALI

Dear customer, thank you for purchasing our product. Please read the following instructions carefully and follow them to serve you safely and to your satisfaction. This will prevent misuse or damage. Avoid unprofessional handling of this appliance and always observe the electrical appliance usage guidelines. Keep the instruction manual carefully. Installation may only be carried out by a qualified worker qualified by Decree No. 50/1978 Coll., as amended, at least a worker who is knowledgeable by Section 5 of Decree No. 50/1978 Coll., as amended

TECHNICAL PARAMETERS

Model	WPH-150W-006
Input voltage	AC90~305V
Color rendering	CRi>80
Power	150W
Material	Aluminium
Luminosity	21000lm (+/- 5%)
Operating temperature	-30°C ~ +50°C
Chromaticity	5000K
Dimensions of the luminaire	305 x 172 mm
Beam angle	120°
Protection	IP65

Package contains: 1 pc LED High Bay luminaire
1 pc Instructions
1 pc Installation ring and safety rope

WARNING

Read the operating instructions carefully before installation.
Only have a qualified person in the field or a professional technician install the luminaire.
Before installation, check that the local voltage range matches the luminaire’s operating voltage.
If the luminaire is damaged, it should be replaced by the supplier, a service representative, or a qualified person.
Protect the luminaire from fire, overvoltage, and vibration.
Take extra care to avoid fire or electric shock.

INSTALLATION

DIMENSIONS

WIRING DIAGRAM

The light source of this luminaire is non-replaceable, at the end of its service life the entire luminaire must be replaced and disposed of in a designated place. This product contains a light source that for design reasons cannot be removed for verification and therefore the entire product is considered a light source. The power cord cannot be replaced if damaged, the unit must no longer be used.
The product has been issued with a CE declaration of conformity by the applicable regulations. On request from the manufacturer: info@solight.cz, or downloadable at www.solight.cz/en

FAQ

Q: Can the light source be replaced?
A: No, the light source of this luminaire is non-replaceable. The entire luminaire must be replaced at the end of its service life.

Q: What should I do if the luminaire is damaged?
A: If the luminaire is damaged, it should be replaced by the supplier, a service representative, or a qualified person.

Q: How should I connect the supply cable?
A: Connect the supply cable following these color codes – Brown for L, Blue for N, and Yellow/Green for ground. Ensure waterproof processing during installation.