HOFTRONIC Flex Series Controller RGB User Manual
- June 3, 2024
- HOFTRONIC
Table of Contents
USER MANUAL
FLEX SERIES
CONTROLLER RGB
HOW DOES THE SMART LEARNING FUNCTION WORK?
With the handy new feature you can now link the controller to one or more
strips. This ensures that the controller only works with the connected LED
Strip(s).
Follow the steps below to put the LED strip in smart pairing mode.
Step 1: Remove the power from the driver.
Step 2: While there is no power on the driver, keep the “on/off” button
pressed and proceed to the next step.
Step 3 : Turn on the driver while keeping the “on/off” button pressed.
Step 4: When the driver has power on, press and hold the “on/off” button
for 2 more seconds. Then release the button and you will see the light starts
to flicker on the controller, this means the smart pairing is successful.
WHAT FUNCTIONS DO THE BUTTONS ON THE RGB CONTROLLER HAVE?
The RGB controller has a total of 24 buttons. The buttons are explained in the
following sections.
Brightness up: The brightness increases with every push of the button.
Keep pressing the button repeatedly until the desired dimming result is
achieved.
Brightness down: The brightness level decreases with every push of the
button. Keep pressing the button repeatedly until the desired dimming result
is achieved.
“OFF”: Press this button once to switch off the LED Strip.
“ON”: Press this button once to turn on the LED Strip.
“R-button”: Press this button once to set the colour red.
“G-button”: Press this button once to set the colour green.
“B-button”: Press this button once to set the colour blue.
“W-button”: Press this button once to set the colour white.
“Flash”: Activate Flash mode by pressing this button once. The RGB strip
changes colour quickly every +/- 0.5-1 second.
“Strobe”: Activate the Strobe mode by pressing this button once. In
Strobe mode, the RGB strip changes colour every 2 seconds.
“Fade”: Activate the Fade mode by pressing this button once. In Fade
mode, the strip changes its light colour very smoothly.
“Smooth”: Activate the Smooth mode by pressing this button once. The
Smooth mode ensures that the strip switches very slowly and very smoothly to
different light colours. The other buttons will set the RGB LED strip to the
corresponding colour.
HOW CAN YOU SET THE RGB FLEX60 STRIP TO ONE COLOUR?
By pressing one of the colourful buttons on the controller, you can set a
light colour. It is not possible to set several colours at the same time.
WHAT IS DIFFERENT ABOUT THE FLEX SERIES LED STRIPS DRIVER?
The water-resistant driver has a smart memory, which means that the last
setting of the driver is saved when the LED strip has been without power for a
while.
HOW CAN I DIM THE RGB FLEX60 STRIP?
There are 2 buttons on the top left corner on the remote to adjust the
brightness. Click on one of the two buttons to adjust the brightness up or
down.
CAN YOU DIM THE RGB LED STRIP WITH A NORMAL LED DIMMER?
The Flex Strips are suitable for Trailing Edge (RC). If you have a LED Dimmer
that is Trailing Edge, you can connect the dimmer to the driver of the LED
Strip and dim it.
HOW MANY METERS AWAY CAN I OPERATE THE LED STRIP?
30 meters.
INTENDED USE / APPLICATION
Product designed for the use in households and for other similar general applications.
MOUNTING
Technical changes reserved. Read the manual before mounting. Mounting should be performed by an appropriately qualified person. Any activities to be done with disconnected power supply. Exercise particular caution. Product has a protective contact/terminal. Failure to connect the protective lead may lead to electric shock. Mounting diagram: see pictures. Check for proper mechanical fastening and connection to electrical power prior to first use. The product can be connected to a supply network which meets energy quality standards as prescribed by law. To maintain the proper IP protection level, the right diameter of the power cable should be selected for the cable gland used in the product.
FUNCTIONAL CHARACTERISTICS
Product can be used indoors and outdoors.
USAGE GUIDELINES / MAINTENANCE
Any maintenance work must be performed when the power supply is cut off and
the product has cooled down. Clean only with soft and dry cloths. Do not use
chemical detergents. Do not cover the product. Ensure free air access. Product
may heat up to a higher temperature. Product can only be supplied by rated
voltage or voltage within the range provided. It’s forbidden to use the
product with damaged protective cover. Product must not be used in
unfavourable conditions, e.g. dust, water, moisture, vibrations, explosive air
atmosphere, fumes, or chemical fumes, etc. Nondemountable product. Not
suitable for independent repairs.
ENVIRONMENTAL PROTECTION
Keep your environment clean. Segregation of post-packaging waste is recommended. This labelling indicates the requirement to selectively collect waste electronic and electrical equipment. Products labelled in this way must not be disposed of in the same way as other waste under the threat of a fine. These products may be harmful to the natural environment and health, and require a special form of recycling/ neutralising. Products labelled in this way should be returned to a collection facility for waste electrical and electronic goods. Information on collection centres is provided by local authorities or sellers of such goods. Used items can also be returned to the seller when new product is purchased, in quantity no larger than the purchased item of the same type. The above rules regard the EU area. In the case of other countries, regulations in force in a given country must be applied. Contacting the distributor of our products in a given area is recommended.
COMMENTS / GUIDELINES
Failure to follow these instructions may result in e.g. fire, burns, electrical shock, physical injury and other material and non-material damage. For more information about Hoftronic products visit www.hoftronic.com. Hoftronic shall not be responsible for any damage resulting from the failure to follow these instructions. Hoftronic reserves the right to make changes in the manual – the current version can be downloaded at www.hoftronic.com.
DECLARATION OF CONFORMITY
DOCUMENTATION
This product has been manufactured and supplied in compliance with all
relevant regulations and directives applicable to all member states of the
European Union. The product complies with all applicable regulations and rules
in the country of sale. Formal documentation such as the declaration of
conformity, the safety data sheet and the product test report is available
upon request.
CE DECLARATION
The product complies with the following directives:
LVD: 2014/35/EU
EMC: 2014/30/EU
RoHS: 2011/65/EU
The complete Declaration of Conformity Document (DOC) is available upon
request.
Imported by
HOF Trading B.V.
Fahrenheitstraat 11, 6003 DC Weert , The Netherlands
Made in P.R.C.
www.hoftronic.com