PEDROLLO TRITUS-INOX Submersible Pumps With Grinder Instruction Manual
- July 18, 2024
- pedrollo
Table of Contents
PEDROLLO TRITUS-INOX Submersible Pumps With Grinder
Specifications
- Product: TRITUS-INOX Submersible Pump with Grinder
- Performance Range: Sewage, Domestic use, Civil use
- Materials: Stainless steel blade, Cast iron pump body, Technopolymer impeller, AISI 440C stainless steel grinder, AISI 431 stainless steel motor shaft, AISI 304 stainless steel motor sleeve
- Power Cable Length: 10 meters
- Features: Robust design to cut through solids and fibers in wastewater, Float switch included in single-phase models
Installation and Use
The TRITUS-INOX series is designed for pressurized transfer of materials into sewage systems via small-diameter piping. Ensure the power cable is appropriately sized for installation.
Dimensions and Weight
| Type | a | b | c | f | h | h1 | d | e | p |
|---|---|---|---|---|---|---|---|---|---|
| Single-phase TIGm 0.55 | 15.9 mm | 85 mm | 177 mm | 398 mm | 117 mm | 65 mm | 16.0 | ||
| mm | 115 mm | adjustable 500 mm |
Frequently Asked Questions
- Q: What is the power cable length for the TRITUS-INOX pumps?
- A: The power cable length is 10 meters.
- Q: Can the TRITUS-INOX series handle domestic wastewater?
- A: Yes, the TRITUS-INOX pumps are designed to cut through solids and fibers found in domestic wastewater.
- Q: Does the TRITUS-INOX series come with a float switch?
- A: Yes, the float switch is exclusive to single-phase models of the TRITUS-INOX pumps.
TRITUS-INOX pumps deliver reliable performance in demanding work conditions
PERFORMANCE RANGE
- Flow rate up to 250 l/min (15 m³/h)
- Head up to 24 m
INSTALLATION AND USE
The TRITUS-INOX series is equipped with a robust, hardened stainless steel blade, expertly designed to cut through solids and fibers found in domestic wastewater and sewage, for pressurized for pressurized transfer of materials into sewage systems via small-diameter piping
INCLUDES
- Power cable length 10 m
- Float switch (exclusive to single-phase models)
APPLICATION LIMITS
- Depth below water level up to 5 m (with an appropriately sized power cable)
- Liquid temperature up to +40 °C
- Bottom drainage level up to 85 mm
- Minimum immersion for continuous service: 300 mm
AVAILABLE UPON REQUEST
- Different voltage requirements 60 Hz frequency
- Three-phase pumps
- For TIGm 1.1 and TIGm 1.3 external control cabinet for increased operational safety due to special capacitor that significantly increases torque. The panel includes the manual reset motor protection switch.
PATENTS – TRADE MARKS – MODELS
- Patent No. EP2313658
- Patent No. IT0001428923
- TRITUS® Registered Trade mark No. 013017181
CURVES AND PERFORMANCE DATA
TYPE
Single-phase
| POWER (P2)| Q| m³/h| 0| 1.2| 2.4| 3.6| 4.8| 6| 7.2| 7.8| 8.4| 9|
10.2| 12| 13.2| 14.4| 15
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---
kW| HP| l/min| 0| 20| 40| 60| 80|
100| 120| 130| 140| 150| 170| 200| 220|
240| 250
TIGm 0.55| 0.55| 0.75|
H metres
| 16| 14.5| 13.3| 11.8| 10| 8| 5.7| 2| | | | | | |
TIGm 0.75| 0.75| 1| 18.5| 17.5| 16| 14.6| 12.8| 10.8| 14| 7| 2| | | |
| |
TIGm 1.1| 1.1| 1.5| 24| 22.5| 21| 19.5| 18| 16.3| 13| 10.4| 6.8| 2| |
| | |
TIGm 1.3| 1.3| 1.75| 21| 20.5| 19.7| 19| 18.2| 17.4| 16.5| 16| 15.4|
14.8| 13.5| 11| 9.2| 7| 2
ABSORPTION
TYPE
Single-phase
| VOLTAGE
230 V
---|---
TIGm 0.55| 4.5 A
TIGm 0.75| 5.5 A
TIGm 1.1| 6.7 A
TIGm 1.3| 7.0 A
DIMENSIONS AND WEIGHT
TYPE
Single-phase
| PORT
DN
| DIMENSIONS mm| kg
1~
---|---|---|---
a| b| c| f| h| h1| d| e| p| **
TIGm 0.55| **
1½”
| ****
115
| ****
85
| ****
147
| ****
177
| ****
398
| ****
117
| ****
65
| ****
adjustable
| ****
500
| ****
500
| 15.9
TIGm 0.75| 16.0
TIGm 1.1| ****
93
| ****
195
| ****
432
| ****
127
| ****
70
| 18.3
TIGm 1.3| 18.3
PALLET CAPACITY
TYPE
Single-phase
| NO. OF PUMPS
---|---
TIGm 0.55| 60
TIGm 0.75| 60
TIGm 1.1| 45
TIGm 1.3| 45
MATERIALS AND COMPONENTS
1| Pump body| Cast iron with cataphoresis treatment, provided with
ISO 228/1 threaded port
---|---|---
2
| ****
Impeller
| ****
Open type in technopolymer
3
| ****
Grinder
| ****
Hardened AISI 440C stainless steel
4
| ****
Motor shaft
| ****
Stainless steel AISI 431
5
| ****
Motor sleeve
| ****
Stainless steel AISI 304
6 Double shaft seal with interposed oil chamber
- 7 Electric motor
- Single-phase 230 V – 50 Hz with winding integrated thermal motor protection
- Insulation: class F
- Protection rating: IP X8
- 8 Power cord
- 10 metres ‘H07 RN-F’ type with Schuko plug
- 9 Float switch
- 10 Tilting device for the float cable
- Patent No. IT0001428923
- 11 Power cable strain relief
- Patent No. EP2313658