PEDROLLO TOP-FLOOR Submersible Pumps For Drainage Instruction Manual

PEDROLLO TOP-FLOOR Submersible Pumps For Drainage

PERFORMANCE RANGE

• Flow rate up to 170 l/min (10.2 m3/h)
• Head up to 10.4 m

INSTALLATION AND USE
Clearwater TOP-FLOOR series drainage pumps are capable of removing water up to 2 millimeters from the floor, these pumps are ideal for emergency household use in small, flooded areas and any situation where maximum drainage is needed.

APPLICATION LIMITS

• Maximum operating depth below water level up to 3 m (with an appropriately sized power cable)
• Liquid temperature up to +40 °C and up to +90 °C for short bursts (up to 3 minutes max) for intermittent service
• Capable of processing suspended solids up to Ø 2 mm
• Draining capability up to 2 mm from the bottom

INCLUDES

• 5 m long power cable

AVAILABLE UPON REQUEST

• Pumps with float switch
• Mechanical seal options available
• Pumps with 10 m power cable.
• Different voltage requirements 60 Hz frequency

PATENTS – TRADE MARKS – MODELS

• Registered Community Model No. 342159-0011

CURVES AND PERFORMANCE DATA

• Q = Flow rate H = Total manometric head Performance curves comply with EN ISO 9906 Grade 3B tolerance limits.

ABSORPTION

TYPE VOLTAGE
Single-phase 230 V

• TOP 1-FLOOR 1.5 A
• TOP 2-FLOOR 2.0 A
• TOP 3-FLOOR 3.1 A

DIMENSIONS AND WEIGHT

PALLET CAPACITY

TYPE NO. OF PUMPS
Single-phase

• TOP 1-FLOOR 96
• TOP 2-FLOOR 96
• TOP 3-FLOOR 96

TYPE NO. OF PUMPS
Single-phase

• TOP 1-FLOOR 96
• TOP 2-FLOOR 96
• TOP 3-FLOOR 96

MATERIALS AND COMPONENTS

1. Pump body Technopolymer

2. Suction filter Technopolymer

3. Suction cover Stainless steel AISI 304

4. Diffuser Technopolymer

5. Impeller Noryl™

6. Motor sleeve Stainless steel AISI 304

7. Motor cover Stainless steel AISI 304

8. Motor shaft Stainless steel AISI 431

9. Double shaft seal with interposed oil chamber

   • Seal Shaft Materials
   • STA-12R Ø 12 mm Ceramic / Graphite / NBR
   • Sealing ring Ø 12 x Ø 19 x H 5 mm

10. Capacitor

11. Electric motor

    • TOP-FLOOR: single-phase 230 V – 50 Hz with winding integrated thermal motor protection
    • Continuous running duty S1
    • Insulation: Class F
    • Protection rating IP X8
      Handle group

12. Complete with 5 meters long power cable type ‘H07 RN-F’ with Schuko plug

13. Ferrule and hose nozzle

    • Hose connector Ø 25 mm for TOP1-FLOOR
    • Ø 35 mm for TOP2-FLOOR, TOP3-FLOOR

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>