Dexcom G6 Continuous Glucose Monitor Instruction Manual

: July 18, 2024
: Dexcom

Table of Contents

Dexcom G6 Continuous Glucose Monitor
Product Usage Instructions
FAQs
Dexcom G6 CGM (G6) Overview
What It Does
Choose App Receiver or Both
Set Up App
Set Up Receiver
Documents / Resources

Dexcom G6 Continuous Glucose Monitor

Specifications

Product: Dexcom G6 CGM
Components: Display Device, Smart Device, Dexcom Receiver, Applicator With Built-in Sensor, Sensor, Transmitter

Product Usage Instructions

Setting Up the App

Download and open the Dexcom G6 app on your smart device.
Follow the onscreen setup instructions which include consenting to share data with Dexcom.
Wait for the sensor warmup timer to complete (2 hours).

Using Your G6

Turn on the receiver by pressing the power button for 2-3 seconds.
Follow the onscreen instructions on the receiver.

Setting Up the Receiver

Turn on the receiver by removing it from the box and pressing the power button for 2-3 seconds.
Follow the onscreen instructions, including setting the date and time and entering your information.

Using the Applicator to Insert Built-in Sensor

Take the applicator with a built-in sensor out of the sensor box.
Pick an appropriate sensor site, avoiding bones, irritated skin, tattoos, and areas that get bumped.
Use the applicator to insert the built-in sensor following these steps:
Clean the sensor site with an alcohol wipe.
Peel off adhesive backings without touching the adhesive.
Place the applicator on the skin and press the button to insert the sensor.

FAQs

Q: Can I use both the app and receiver simultaneously?

A: You can choose to set up either the app or receiver first, but do not use both tabs simultaneously. Follow the setup instructions for one device at a time.

Q: How long does it take for the sensor warmup process?

A: The sensor warmup process takes approximately 2 hours before sensor glucose readings are available.

Dexcom G6 CGM (G6) Overview

Display Device

Shows glucose information
Set up your smart device, Dexcom receiver, or both
For a list of current compatible smart devices and operating systems go to: dexcom.com/compatibility
The G6 app and receiver are compatible with all G6 systems

Applicator With Built-in Sensor

Sensor applicator inserts sensor under your skin Sensor gets glucose information

Transmitter

Sends glucose information from sensor to display device
All graphics are representational. Your product may look different.
Review the Safety Statement in Using Your G6, Chapter 2 before using your G6.

What It Does

The G6 sends G6 sensor glucose readings (G6 readings) to your display device.

Choose App Receiver or Both

The receiver is a dedicated medical device. Your smart device is not, even though you can run the G6 app on it. Your smart device is not a dedicated medical device because the app could miss an alarm/alert just because it is on a smart device—for example, due to smart device settings, smart device or app shutting off a low battery, etc.

Use the tabs below to set up the app, receiver, or both

Want to set up both? Pick one to set up first and turn to that tab. The last step shows you how to set up the second display device. Do not use both tabs.

For other ways to learn how to set up your G6:

Watch the tutorial at: dexcom.com/downloadsandguides
Contact your local Dexcom representative for support

Set Up App

Step 1: Set Up App

A) Download and open the Dexcom G6 app
B Follow onscreen setup instructions

When prompted:
- Send your data to the cloud.
- This lets you use:
- Share: Send your G6 data to followers.
- Clarity: Reflect on data with doctors; see patterns (may not available in all regions).
- Enter the sensor code from the sensor you insert, either manually or by taking a picture. The sensor code is on the applicator.
- No sensor code? See Using Your G6, Appendix A Troubleshooting.
- Enter the transmitter serial number (SN), either manually or by taking a picture.
- After you enter your SN, your G6 searches for the transmitter. While it is searching, you will not get G6 readings or alarms/alerts.
See the blue sensor warmup timer?
- That means your sensor is getting used to your body.
- During warmup:
- No G6 readings or alarm/alerts
- Always keep the smart device within 6 meters of the transmitter

C Wait 2 hours

When sensor warm-up is complete, tap OK to see the home screen
Now you get G6 readings and alarm/alerts

Step 2: See Using Your G6

Learn how to:

Read your home screen
Use alarms and alerts
Make treatment decisions
Troubleshoot issues

Step 3: Optional – Set up Receiver

Turn on the receiver by pressing the power button down for 2-3 seconds. Then follow onscreen instructions.
Do not use the Set Up Receiver tab. Those steps are for setting up the receiver before setting up the app.

Set Up Receiver

Step 1: Set Up Receiver

A Turn on receiver

Take the receiver out of the box
Press the power button for 2-3 seconds.

B Follow onscreen instructions

When prompted, enter the date and time
- Tap a box on the screen.
- Tap the up or down arrows to change the value in the box.
- Use this method throughout to enter information.
- When done, tap Save.
- If the battery is ever completely drained, you’ll need to reset the date and time.
When prompted, enter your:
- Sensor code from the sensor applicator you will insert
- No sensor code? See Using Your G6, Appendix A Troubleshooting
- Serial Number (SN) from:
- After you enter your SN, your G6 searches for the transmitter. While it is searching, you will not get G6 readings or alarms/alerts.
You are done with this step when you see this screen:

Step 2: Use Applicator to Insert Built-in Sensor

A Take applicator with built-in sensor out of sensor box

Gather materials: applicator (with code you just entered), transmitter, and wipes.

B Pick sensor site

Avoid bones, irritated skin, tattoos, and areas that get bumped.

C Use the applicator to insert the built-in sensor

Get a sensor applicator and an alcohol wipe.
Wash and dry hands.
Clean the sensor site with an alcohol wipe.
Peel off adhesive backings.
- Do not touch the adhesive.
Place the applicator on the skin.
Fold and break off the safety guard.
Press the button to insert the sensor.
Remove the applicator from the skin leaving the patch and holder on.
Discard applicator.
- Follow local guidelines for blood-contacting components.

Step 3: Attach Transmitter

A Take transmitter out of the box

B Snap in transmitter

Clean the transmitter with an alcohol wipe.
Insert the transmitter, tab first, into a holder.
Snap-in transmitter. It clicks into place. Make sure it is flat and snug in the holder.
Rub around the patch 3 times.

Step 4: Start the Sensor on the Receiver

A Wait up to 30 minutes for pairing

During pairing:

No G6 readings or alarm/alerts
Always keep the receiver within 6 meters of the transmitter

B Tap Start Sensor to begin 2-hour warmup

During warmup, you will not get G6 readings or alarm/alerts

C Wait

When complete, tap Next to go to the home screen
Now you get G6 readings and alarm/alerts

Step 5: See Using Your G6

Learn how to:

Read your home screen
Use alarms and alerts
Make treatment decisions
Troubleshoot issues

Step 6: Optional – Set up App

Download the app onto your smart device and open it. Then follow onscreen instructions.
Do not use the Set Up App tab. Those steps are for setting up the app before setting up the receiver.
© 2023 Dexcom, Inc. All rights reserved. Covered by patents dexcom.com/patents.
Dexcom, Dexcom Share, Dexcom Clarity, and Share are registered trademarks of Dexcom, Inc. in the United States and may be in other countries.
Dexcom, Inc.
6340 Sequence Drive
San Diego, CA 92121 USA
+1.858.200.0200
dexcom.com
Outside US: Contact your local Dexcom representative
MDSS GmbH Schiffgraben 41
30175 Hannover, Germany
MDSS-UK RP Ltd.
6 Wilmslow Road, Rusholme Manchester M14 5TP United Kingdom
LBL015882 Rev 005 MT25143 Rev Date: 2023/04

Documents / Resources

| Dexcom G6 Continuous Glucose Monitor [pdf] Instruction Manual
G6 Continuous Glucose Monitor, G6, Continuous Glucose Monitor, Glucose Monitor, Monitor
---|---