Bezeit AZ012BN Single Handle Bathroom Faucet Owner’s Manual
- June 17, 2024
- Bezeit
Table of Contents
Bezeit AZ012BN Single Handle Bathroom Faucet
Product Information
Description
The Single Handle Bathroom Faucet is a high-quality and stylish faucet
designed for use in bathrooms. It features a single-handle design that allows
for easy control of water flow and temperature. The faucet comes with a deck
plate that can be installed according to your specific needs.
Technical Data
- Product Type: Bathroom Faucet
- Handle Type: Single Handle
Specifications
- Material: [Specify the material]
- Finish: [Specify the finish]
- Installation: Deck Mount
- Water Supply: Hot and Cold Water
- Flow Rate: [Specify the flow rate]
After Sales Service
If you encounter any issues or have any questions regarding the
installation or usage of the Single Handle Bathroom Faucet, please contact our
customer service department. We are committed to providing excellent after-
sales support and will assist you in resolving any concerns you may have.
Attention
Please note that Bezeit reserves the right to make changes in
specifications and materials, as well as change or discontinue models without
prior notice. Additionally, please be aware that there may be slight
differences in sizes due to different measurement methods.
Product Usage Instructions
Step 1: Prepare for Installation
Before installing the Single Handle Bathroom Faucet, ensure that you have
the necessary tools and components. These may include a wrench, adjustable
pliers, plumber’s tape, and the included installation manual.
Step 2: Shut Off Water Supply
Locate the water supply valves under the sink and turn them off to prevent
water flow during the installation process. Test the water supply by turning
on the faucet handles to ensure they are properly shut off.
Step 3: Remove Existing Faucet (if applicable)
If you are replacing an existing faucet, use a wrench or pliers to
disconnect the water supply lines and remove the old faucet. Clean the area
thoroughly to prepare for the new installation.
Step 4: Install the Deck Plate
Choose the desired position for the deck plate and place it over the
mounting holes on the sink or countertop. Insert the faucet through the center
hole of the deck plate and secure it using the provided mounting hardware.
Step 5: Connect Water Supply Lines
Attach the hot and cold water supply lines to the corresponding valves on
the faucet. Use adjustable pliers to tighten the connections, ensuring they
are secure but not over-tightened.
Step 6: Check for Leaks
Once the water supply lines are connected, turn on the water supply valves
and check for any leaks around the connections. If leaks are detected, tighten
the connections further or apply the plumber’s tape to create a watertight
seal.
Step 7: Test the Faucet
With the installation complete, turn on the faucet handles to test the
water flow and temperature control. Adjust the handle as needed to achieve
your desired water temperature.
Frequently Asked Questions (FAQ)
-
Q: Can I install this faucet without using the deck plate?
A: Yes, you can choose to install the faucet without the deck plate if your sink or countertop has individual mounting holes. -
Q: What is the recommended cleaning method for this faucet?
A: To clean the Single Handle Bathroom Faucet, simply use mild soap and warm water. Avoid using harsh chemicals or abrasive cleaners that may damage the finish. -
Q: Can I adjust the water flow rate?
A: The flow rate of the faucet is pre-set and cannot be adjusted. However, you can control the water flow by adjusting the handle position.
Install the deck plate according to your needs.
DIMENSIONS
DESCRIPTION
- Precision plating process
- Flexible supply lines
- Ergonomic Lever style handle
- One or three-hole mount (Includes 3-hole deck plate).
- Single-body construction for easy replacement
TECHNICAL DATA
- Operating pressure: max. 1.OMPa
- Recommended operating pressure: O.1MPa-O.5MPa
- Applicable water temperature: 4°C-90°C
- Recommended water temperature: 4°C-70°C
- Operating environment temperature: 4°C-S0°C (limited to use in buildings)
PRODUCT INFORMATION
- Faucet material: brass
- Faucet Weight:109O.1g
- Supply line internal material: TPE
- Supply line external material: stainless steel
AFTER-SALES SERVICE
Our store supports returns and refunds.
If you have any questions about bathroom faucets, please feel free to contact
us via email!
ATTENTION
Bezeit reserves the right to make changes in specifications and materials, and
to change or discontinue models.
Please note that there are differences in sizes due to different measurement
methods!
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>