iHealth AM6 Flow Activity Tracker User Guide

iHealth AM6 Flow Activity Tracker

Specifications

• Touch Screen
• Home Button
• Charging Port
• Heart Rate Sensor

Product Usage Instructions

Activation

1. Plug the charger into a standard USB port (5W, 1A) and attach the iHealth Flow Activity Tracker for charging.
2. The tracker comes fully charged, but charging it will activate the watch. The screen will light up when ready for setup.

Setup

1.  Scan the QR code to install the Free iHealth MyVitals App, or download it from the Apple App Store or Google Play.
2.  Sign up or log in to your iHealth account.
3.  Ensure Bluetooth is turned on for the app.
4.  Select the device and add iHealth Flow from the list.
5.  Scan the QR code on the screen or click manual pair to select your device ID for pairing.
6.  Wait for “Success” to appear on your tracker. Setup is complete when a clock is displayed.

Controls

•  Press the right button to unlock the tracker screen. Press again to access functions.
• To change the watch face, press and hold the screen, then swipe left or right to select different styles.

In the Box

• iHealth Flow Activity Tracker x1
• USB Charger x1
• Quick Start Guide x1

ACTIVATION

1. Please plug the charger into a standard USB port (SW, 1 A) and attach the iHealth Flow Activity Tracker with the charging dip.
2.  iHealth Flow ActivityTracker comes fully charged. Charging it will activate the Watch. Your iHealth Flow Activity Tracker screen will light up when it is ready for setup.

SETUP

1. Scan the QR code to install the Free1Health MyVitals” App.
   • Or download directly from the Apple App Store or Google Play
2. Sign up or log in to your iHealth account.  Please make sure that the Bluetooth is turned on for the iHealth MyVitals app

Click on Add New Device and select iHealth Flow from the list.

Scan the QR code on the screen, or you can click the Manual pair to select your device ID and start pairing.

Wait for “Success to appear on your iHealth Flow Activity Tracker. When it displays a clock, the setup process is complete. Enjoy your iHealth Flow

CONTROLS
Press the right button to unlock the iHealth FlowActivity Tracker screen. Press again and click on the icons to access each function.
If you want to change the watch face, press and hold the screen and swipe left and right to select different styles

IN THE BOX

• iHealth Flow ActivityTracker  x1
• USB Charger  x1
• Quick Start Guide  x1

FCC

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, under part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used by the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which be determined by turning the equipment off and on1 the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
• The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.

FCC ID: SLRAM6
For more compliance information, please see: the main function page-> setting-> compliance info

FAQ

Q: How do I change the watch face?
A: Press and hold the screen, then swipe left or right to select different styles.

Q: How do I activate my iHealth Flow Activity Tracker
A: Plug the charger into a standard USB port and attach the tracker for charging. The screen will light up when ready for setup.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>