FONESTAR VULKAN-51ST Horn Speaker User Guide
- May 15, 2024
- Fonestar
Table of Contents
FONESTAR VULKAN-51ST Horn Speaker
Product Information
Specifications:
- Power: 50 W RMS
- Speaker: 1 compression driver
- Frequency Response: 380-6,500 Hz (-10 dB)
- Impedance: 50 W RMS @ 100 V (200 Ω), 25 W RMS @ 100 V (400 Ω), 12.5 W RMS @ 100 V (800 Ω), 6.25 W RMS @ 100 V (1,600 Ω), Low Z: 8 Ω
- Sensitivity: 109 dB @ 1 W/1 m
- Maximum Sound Pressure: 50 W RMS
- Coverage Angle: Not specified
- Protections: IP-66
- Material: Weather-resistant materials
- Switch: Power selector for 70V, 100V, or low impedance lines
- Connection: Amplifier output – 100 V line – Min: 50 W RMS
- Temperature Range: Not specified
Product Usage Instructions
Installation:
- Configure the speaker according to your installation requirements.
- Connect the cables properly.
- Refer to the provided installation manuals for detailed instructions based on language preference.
Usage:
The VULKAN-51ST horn speaker is suitable for public address applications in open spaces, industrial facilities, sports facilities, car parks, and marine environments. It is designed to reproduce speech frequencies and transmit messages over long distances.
Power Selection:
Ensure to select the appropriate power setting (70V, 100V, or low impedance) based on your setup requirements for optimal performance.
Maintenance:
Regularly check the speaker for any dust or water ingress and clean as necessary. Ensure all connections are secure and functioning properly.
Frequently Asked Questions
Q: What are the recommended applications for the VULKAN-51ST horn speaker?
A: The speaker is suitable for public address systems in open spaces, industrial facilities, sports facilities, car parks, and marine environments.
Q: How do I select the power configuration for the speaker?
A: Use the power selector to choose between 70V, 100V, or low impedance settings based on your installation requirements.
DESCRIPTION
- The horn speakers of the VULKAN series are suitable for reproducing the frequency range of speech and sending messages over long distances
- Specially constructed with materials that are highly resistant to adverse weather conditions, and a design that gives them an IP-66 degree of protection against the ingress of dust and water. Suitable for outdoor and marine environments
- This loudspeaker has a power selector and can be used on 70V, 100V or low impedance speaker lines
- For public address applications in open spaces, industrial facilities, sports facilities, car parks, etc.
IMPORTANT
For proper functioning and performance, use appropriate power, impedance and
frequency limits.
Before connecting to other equipment, take into account the necessary
conditions for a HIGH IMPEDANCE (100 V) and LOW IMPEDANCE installation.
Further information can be found at:
fonestar.com/downloads/install_fonestar_en.pdf
INSTALLATION EXAMPLES
LOW Z
100 V LINE
INSTALLATION
TECHNICAL SPECIFICATIONS
-
POWER: 50 W RMS
-
SPEAKERS: 1 compression driver
-
RESPONSE: 380-6,500 Hz (-10 dB)
-
IMPEDANCE: 50 W RMS@100 V (200 Ω), 25 W RMS@100 V (400 Ω), 12.5 W RMS@100 V (800 Ω), 6.25 W RMS@100 V (1,600 Ω) Low Z: 8 Ω
-
SENSITIVITY: 109 dB@1 W/1 m
MAXIMUN SOUND -
PRESSURE: 116 dB@15 W/1 m
-
COVERAGE ANGLE: H/V: 120º/120º@500Hz, 80º/80º@1kHz, 40º/40º@2kHz, 30º/30º@4kHz (-6 dB)
-
PROTECTIONS: IP-66 in compliance with EN 60529
-
MATERIAL: Aluminium diffuser, ABS rear cover, Aluminium bracket, A2 stainless steel screws
-
SWITCH: W selector in high Z and low Z
-
CONNECTION: 30 cm cable with stripped ends
-
TEMPERATURE RANGE : Operation: -25ºC ~ +55ºC
-
Storage: -40ºC ~ +70ºC
-
MEDIDAS: 325 x 325 x 350 mm depth
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>