HOFTRONIC 5428203 Loki Ambient Table Light Instruction Manual
- June 3, 2024
- HOFTRONIC
Table of Contents
HOFTRONIC 5428203 Loki Ambient Table Light
Please read these instructions and retain them for future reference.
IMPORTANT INFORMATION
-
It is recommended that the fittings are installed by a qualified electrician ensuring the installation complies with current IEE wiring regulations & local building control. Make sure your mobile phone’s operating system is at least iOS 9 for Apple, or at least 4.4 for Android.
-
Download Hoftronic Smart App – Scan the QR code on the right to download the Hoftronic Smart App. You can also search “Hoftronic Smart” in either Apple App Store or Google Play to install the App.
Register a Hoftronic Smart account and sign in the App – You will be prompted to enter your mobile number or email address to register. The system -
automatically recognises your country / area. You can also select your country code. Note: If you use a Mobile number you will be sent a text message with your confirmation code to complete your account registration.
-
Add smart table light to Hoftronic Smart App – Tap the icon “+” on the top right corner of “Home” page, choose ‘Lighting’ and your device type –
-
Lighting BLE+Wi-Fi, then follow the instructions to connect the lamp. The table light needs to be set to flash rapidly. Please follow Step A and B below:
-
After connection, the lamp will appear in your list and you can control it from anywhere in the world. You can also rename the lamp and group more lamps.
SAFETY INSTRUCTIONS
- To reduce risk of electric shock, this product should be opened by an authorized technician when service is required.
- Disconnect the product from the mains and other equipment if a problem should occur.
- Only use the device for its intended purposes.
- Do not use the device if any part is damaged or defective.
- This device is suitable for indoor use only.
- This device can only be connected to a 5V 2A or higher adapter with the included USB cable.
FUNCTIONS
Touch lens on the top
- Turn the light on/off
- Switch 15 scenes
Button on the lamps base
- Long press the button(>5 sec.) to enter the pairing mode
- Short press the button(1 sec) to switch 7 local music modes
Voice reception
Local music function
KEY OPERATION INSTRUCTION
Button on the base of the lamp
Press to switch to the local music scene (7 scenes);
- Beat (Rock)
- Beat (Jazz)
- Beat (Classic)
- Roll (Alongclock )
- Roll (Inversecolor )
- Energy
- Spectrum
It all syncs with the App ’page; Press longer 5 seconds to reset
Touch lens on the top
Turn on the light + Scene switch (15 scenes );
- Turn on the light
- ”Good night“ scene
- “Romantic ”scene
- ”Seaside“ scene
- ”Soft “scene
- ”Film“scene
- ”Fireworks“scene
- ”Sunset glow“scene
- ”Christmas“scene
- ”Flame“scene
- ”Sea wave“scene
- ”Star point“scene
- ”Meteor“scene
- ”Colorful“scene
- ”Breathing“scene
- ”Recursion“scene
Press longer than 5 seconds to turn off the light
DIY MODES INSTRUCTION
On the “Color” page, here’re two DIY modes:
On the static page:
There are 9 different colors that can be customized, you can change all 9
parts by clicking on the part you want to change and selecting a color of
choice than deselect its check box and move on to the next part. After
finished, you can preview and save it. And the DIY mode will be displayed on
the top of the “Scene” page; You can do DIY for max three modes, which can not
be canceled and can only be modified;
On the Dynamic page:
There are 7 different colors that can be customized and you can choose 7
different dynamic states in their 7 colors;
Product maintenance
The product can be cleaned with clear water and a soft cloth. Do not use
detergents containing surface active agents or scouring agents.
Information for disposal
Old appliances marked with the pictured symbol must not be disposed of with
the trash. You must return them to a waste collection center (inquire at your
local community) or the retailer where they were purchased. They will ensure
environmentally disposal.
CE-Declaration
This product complies with the following directives:
- LVD: 2014/35EU
- EMC: 2014/30/EU
- RoHS: 2011/65/EU
Explanation of symbols, concepts and particularities of the product CE is the abbreviation for Conformité européenne – And means conforms to the European guidelines. With the CE-mark, the manufacturer confirms that this product complies with the current European guidelines. be performed by an appropriately qualified person. Any activities to be done with disconnected power supply. Exercise particular caution. Product has a protective contact/terminal. Failure to connect the protective lead may lead to electric shock. Mounting diagram: see pictures. Check for proper mechanical fastening and connection to electrical power prior to first use. The product can be connected to a supply network which meets energy quality standards as prescribed by law. To maintain the proper IP protection level, the right diameter of the power cable should be selected for the cable gland used in the product.
FUNCTIONAL CHARACTERISTICS
Product can be used indoors and outdoors.
USAGE GUIDELINES / MAINTENANCE
Any maintenance work must be performed when the power supply is cut off and
the product has cooled down. Clean only with soft and dry cloths. Do not use
chemical detergents. Do not cover the product. Ensure free air access. Product
may heat up to a higher temperature. Product can only be supplied by rated
voltage or voltage within the range provided. It’s forbidden to use the
product with damaged protective cover. Product must not be used in
unfavourable conditions, e.g. dust, water, moisture, vibrations, explosive air
atmosphere, fumes, or chemical fumes, etc. Non-demountable product. Not
suitable for independent repairs.
ENVIRONMENTAL PROTECTION
Keep your environment clean. Segregation of post-packaging waste is
recommended. This labelling indicates the requirement to selectively collect
waste electronic and electrical equipment. Products labelled in this way must
not be disposed of in the same way as other waste under the threat of a fine.
These products may be harmful to the natural environment and health, and
require a special form of recycling/neutralising. Products labelled in this
way should be returned to a collection facility for waste electrical and
electronic goods. Information on collection centres is provided by local
authorities or sellers of such goods. Used items can also be returned to the
seller when new product is purchased, in quantity no larger than the purchased
item of the same type. The above rules regard the EU area. In the case of
other countries, regulations in force in a given country must be applied.
Contacting the distributor of our products in a given area is recommended.
COMMENTS / GUIDELINES
Failure to follow these instructions may result in e.g. fire, burns,
electrical shock, physical injury and other material and non-material damage.
For more information about Hoftronic products visit www.hoftronic.com.
Hoftronic shall not be responsible for any damage resulting from the failure
to follow these instructions. Hoftronic reserves the right to make changes in
the manual – the current version can be downloaded at www.hoftronic.com.
DECLARATION OF CONFORMITY
DOCUMENTATION
This product has been manufactured and supplied in compliance with all
relevant regulations and directives applicable to all member states of the
European Union. The product complies with all applicable regulations and rules
in the country of sale. Formal documentation such as the declaration of
conformity, the safety data sheet and the product test report is available
upon request.
CE DECLARATION
The product complies with the following directives:
- LVD: 2014/35EU
- EMC: 2014/30/EU
- RoHS: 2011/65/EU
The complete Declaration of Conformity Document (DOC) is available upon request.
Imported by HOF Trading B.V.
Fahrenheitstraat 11, 6003 DC Weert , The Netherlands Made in P.R.C.
www.hoftronic.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>