GERMAN POOL RHM Series Chimney Type Range Hood User Manual

GERMAN POOL RHM Series Chimney Type Range Hood

Specifications

• Product : Chimney Type Range Hood
• Series : RHM SERIES (6328S / 7328S / 8328S / 9328S / 6428S / 7428S / 8428S / 9428S)

Product Structure

1. Motor Cover
2. Body
3. Light
4. Control Panel
5. Metal Panel (oil collector inside)
6. Main Power Switch

Installation Instructions

Pre-installation Notice: The range hood must be installed and repaired by authorized qualified technicians. Before installation, plug in and check if all switches are functional.

Note: The range hood requires an independent air vent to exhaust lampblack. Ensure proper ventilation in the room when using the range hood with gas-burning appliances.

Operating Instructions

1. Ensure the power supply cord is intact before operating the appliance.
2. Always disconnect the power supply before cleaning, repairing, or dismantling the range hood.
3. The range hood must be earthed for safety.
4. Connect the range hood to an exhaust pipe of at least 6 inches in diameter for fume extraction.
5. Avoid flam being under the range hood.

Care & Maintenance

1. Wear safety gloves for installation, cleaning, light bulb changing, and dismantling to prevent injuries.
2. Avoid splashing or spraying water on the range hood to protect electrical components.
3. Clean easily soiled parts at least once a week to prevent oil build-up and fire hazards.

Online Warranty Registration

Please read these instructions and warranty information carefully before use and keep them handy for future reference.

Notice Before Use

Important
For safety purpose, you should read the instructions carefully before using the appliance for the first time. Save the instructions for future reference. The appliance is designed for domestic use and may only be installed and operated in accordance with these instructions for use

1. The appliance is not intended for the use of, and playing with, by persons (including children) with reduced physical, sensory or mental capabilities, or any individual lack of experience and knowledge, unless they have been given supervision or instruction.
2. Keep children away from the appliance. Do not let them use the appliance without supervision.
3. If the power supply cord is damaged, do not operate the appliance. Contact German Pool or a licensed technician for a replacement immediately.
4. Disconnect the power supply before cleaning, repairing or dismantling the range hood.
5. The range hood must be earthed.
6. Connect the range hood with an independent air vent to the exhaust lampblack.
7. The air must not be discharged into a venting pipe that is used for exhausting fumes from appliances burning gas or other fuels.
8. The connection opening at the top of the range hood must be connected to the exhaust pipe for exhausting fumes to the outdoors. Exhaust pipe of 6 inches in diameter should be used.
9. The appliance should be positioned 700±50mm above the cooking range.
10. Do not flambe under the range hood.
11. Please wear safety gloves for installation, cleaning, light bulb changing and dismantling in order to prevent injuries.
12. To protect electrical parts, do not splash or spray the range hood with water.
13. German Pool range hood has high venting efficiency. Most of the grease vapor will be exhausted through the air vent when the range hood is in operation. Only very little amount of residual oil will be collected in the Oil Collecting Tray.
14. There should be adequate ventilation in the room when the range hood is used along with appliances that burn gas or other fuels.
15. Regulations concerning the discharge of air have to be fulfilled.
16. To prevent fire hazard in case of oil build-up, the easily-soiled parts must be cleaned at least once a week.

Product Structure

1. Motor Cover
2. Body
3. Light
4. Control Panel
5. Metal Panel (oil collector inside)
6. Main Power Switch

Installation Instructions

Pre-installation Notice
The range hood must be installed and repaired by authorized qualified technicians. Before installation, plug in and check if all switches are functional.

• Installation Environment
  For efficient air extraction, avoid opening too many windows surrounding range hood for this will cause air convection which prevents cooking fumes from rising to 25 cm (the effective suction / exhaust area).

• Height of Installation
  The appliance should be positioned 700 ± 50mm above the cooking range. A distance that is near 700mm results in higher venting efficiency (Fig A).

• Keep the Hood Level
  The installation of the hood should remain level, in order to prevent oil from spilling over from oil collectors (Fig B).

• Installation Method
  Drill holes in the wall according to the distance between the 2 mounting brackets and the diameter of the 2 holes on the mounting bracket. Install the anchor screws in the holes. Fix the range hood onto the screw and secure with nuts.

• Length of Exhaust Pipe
  The connection opening at the top of the range hood must be connected to the exhaust pipe for exhausting fumes to the outdoors. Exhaust pipe of 4, 5, 6 inches in diameter should be used. The length of the exhaust pipe should be minimized to avoid air turbulence inside the pipe (Fig C).

Wiring Diagram

Operation Instructions

Important

1. The exhaust duct must be exposed outdoors.
2. There should be adequate ventilation in the room when a gas cooking range or other fuels are in use for cooking.
3. The air from the range hood must not be discharged into a venting pipe that is used for exhausting fumes from appliances burning gas or other fuels.
4. Ensure the electrical rating shown on the rating plate corresponds with the power supply in your house before switching on the power supply.

Control Panel

Operation Instructions

1. Main Power Switch

   • When it is switched to ON, the range hood is connected with power and at stand-by status. All functions can be activated.
   • When it is switched to OFF, all functions including Heat-Activated Auto Start and Automatic Night Light cannot be activated. To activate any functions, it must be switched to ON.

2. Fan Speed

   • Select fan speed: After pressing the Main Power Switch, select fan speed with one of the Fan Speed buttons.
   • Fan off: To turn off the fan, just press the Fan Off button.
     Note : Do not press two Fan Speed buttons at the same time or else the motor will be damaged.

3. Heat-Activated Auto Start
   Note: Make sure the range hood is at stand-by status thus heat-activated auto start can operate.

   • When the gas cooking range is working without the fan turned on, and the air temperature under the range hood reaches 55-60ºC (130-140°F), the thermal sensor will activate the fan to run at high speed for 1.5 minutes automatically.
   • If the temperature under the range hood still reaches 55-60ºC (130-140°F) after the auto start has been completed, the fan will be activated again as described in the step above.
     Note :
     After the first activation of auto-start, you need to press the desired Fan Speed if you want to keep the fan running.

4. LED Light

   • ote : Make sure the range hood is in stand-by status before activating LED lighting.
   • Press the LED Light button ot turn it on.
   • Press the button again ot turn it off.

5. Automatic Night Light
   Note: Make sure the range hood is in stand-by status before activating night light function.

   • When the surroundings are getting darker or completely dark, the night light function will be automatically activated at 20% of LED light’s normal brightness.
   • When the surroundings are getting brighter or completely bright, the senor will turn off the night light function automatically.

Care & Maintenance

Important

• To ensure the most optimum efficiency, the range hood must be cleaned at least once a week.
• Make sure to wear safety gloves before cleaning or dismantling the metal parts of the range hood in order to reduce the risk of any injury caused by the sharp edges.

Warning: There is a risk of fire if repair and cleaning of the range hood (especially the fan and other easily-soiled parts) are not carried out in accordance with the instructions.

1. Power plug must be disconnected before cleaning and repair.
2. Use soft cloth with mild detergent to clean the surface of the hood from outside and inside each time after use and then clean with a cloth soaked with water. Avoid scraping the surface.
3. Clear oil from oil collectors when they are more than half full of grease in order to avoid spilling. Open metal panel and pull and slide the oil collector placed under the fan. Wash and wrap it dry. Then slide and push it back (Fig D).

Troubleshooting

If you encounter the following common troubles, please solve according to the following instructions. If the problem cannot be solved or a cause cannot be found, please contact our customer services centre.

Note : For safety purpose, do not dismantle the product for repair by yourself.

Technical Specifications

Specifications are subject to change without prior notice. If there is any inconsistency or ambiguity between the English version and the Chinese version, the Chinese version shall prevail.

Refer to www.germanpool.com for the most up-to- date version of the User Manual.

Warranty Terms & Conditions

Under normal operations, the product will gurantee a 1-year full warranty provided by German Pool (effective from the date of purchase).

This warranty is not valid until customer registration information is received by our Service Centre within 10 days of purchase via one of the following means:

1. Visit our website and register online: www.germanpool.com/warranty
2. Complete all the fields on the attached Warranty Card and mail it back to our Customer Service Centre.

Please fill out the form below. This information and the original purchase invoice will be required for any repairs. Warranty will be invalidated if information provided is found to be inaccurate.

• Model No. :
  

  • RHM-6328S
  • RHM-6428S
  • RHM-7328S
  • RHM-7428S
  • RHM-8328S
  • RHM-8428S
  • RHM-9328S
  • RHM-9428S

• Serial No. :

• Purchased From :

• Invoice No. :

• Purchase Date :

1. Customer who fails to present the original purchase invoice will be disqualified for free warranty.
2. Customers should always follow the operating instructions. This warranty does not apply to:
   • labor costs for installation, on-site check-up, replacement of parts and other transportation costs;
   • damages caused by accidents of any kind (including transport and others);
   • the casing of hood body, light bullbs, plastic parts and accessories such as oil collecting cups;
   • operating failures resulted by incorrect voltage, improper operations and unauthorized installations or repairs.
3. This warranty is invalid if:
   • purchase invoice is modified by an unauthorized party;
   • product is used for any commercial or industrial applications;
   • product is repaired or modified by unauthorized personnel, or unauthorized parts are installed;
   • serial number is modified, damaged or removed from the product.
4. German Pool will, in its discretion, repair or replace any defective part.
5. This warranty will be void if there is any transfer of ownership from the original purchaser.

The service area includes Hong Kong Island, Kowloon, and New Territories only. Repairs in Tung Chung, Discovery Bay or other areas are subject to an extra service charge.

Customer Service & Repair Centre

Hong Kong, China

• 10/F, Kowloon Godown 1-3 Kai Hing Road, Kowloon Bay, Kowloon, Hong Kong
• Tel : +852 2333 6249
• Fax : +852 2356 9798
• Email : repairs@germanpool.com

Macau, China

• 3/F, Edificio Industrial Pou Fung, 145 Rua de Francisco Xavier Pereira, Macau
• Tel : +853 2875 2699
• Fax : +853 2875 2661

Hong Kong, China

• Room 113, Newport Centre Phase II, 116 Ma Tau Kok Road, Tokwawan, Kowloon, Hong Kong.
• Tel : +852 2773 2888
• Fax : +852 2765 8215

Mainland China

• 8th, Xinxiang Road, Wusha Industrial Park, Daliang, Shunde, Foshan, Guangdong, China
• Tel : +86 757 2980 8308
• Fax : +86 757 2980 8318

Macau, China

• 3/F, Edificio Industrial Pou Fung, 145 Rua de Francisco Xavier Pereira, Macau
• Tel : +853 2875 2699
• Fax : +853 2875 2661

All rights reserved. Copying, reproducing or using the contents of this manual is not allowed without prior authorization from German Pool, violators will be prosecuted

www.germanpool.com

FAQ

1. Can children operate the range hood?
No, children should not operate the range hood without supervision.

2. What should I do if the power supply cord is damaged?
If the power supply cord is damaged, do not operate the appliance. Contact German Pool or a licensed technician for a replacement immediately.

References

• 德國寶German Pool | 家庭電器、廚櫃、傢俬 | 香港十大名牌

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>