HOFTRONIC 4404987 Portable LED Floodlight User Manual
- June 3, 2024
- HOFTRONIC
Table of Contents
HOFTRONIC 4404987 Portable LED Floodlight
CAREFULLY READ THE INSTRUCTIONS BEFORE USE
IMPORTANT WARNINGS
- The product may not be placed on a flammable surface during use or while charging.
- The product must not be used or charged in the vicinity of flammable substances.
- The product must never be covered during use or while charging.
- In the case of damage to the lamp housing or the mains supply, in which the inner components are exposed, the product may no longer be used.
DIAGRAM
SPECIFICATION
| Voltage | DC |
|---|---|
| Power factor | >0.9 |
| Wattage | 30W |
| Lumen | 1000lm |
| Lamp type | LED2835 |
| CRI | >80 |
| Material | Aluminum Die-casting |
| Beam angle | 90° |
| Products size | 279.8 x 217.5 x 56.6mm |
58.6mm
CCT| 3000K/4000K/6000K
Work temp.| -20°C – +50°C
Protection| IP65
Housing color| Yellow
ADVANTAGES AND FEATURES
- Function shift : 1. 100% power 2, 2. 60% power, 3. 20% power, 4. Emergency light
- Backup time : 1. 100% power: 4 hours; 2. 60% power: 9 hours; 3. 20% power: 12 hours
- High-lumen LED SMD with 50.000 hours life span
- PC outdoor optical lens, high light transmittance
- High quality aluminum magnesium alloy, anti-corrosion, substantial, durable, artistic, and practical.
- High craft manifesting production value
- Designed diamond face reflection process, super high-efficiency reflection light source, effectively enhancing the brightness of the illumination
INSTRUCTIONS FOR USE
- Press the on/off button once to turn it on. Then press again to adjust the brightness.
- To turn the work light off, press the on/off button for 2sec.
- The work light can be charged with the included USB cable. Charge the work light for approximately 5-6 hours.
- The work light is fully tiltable, this can be achieved with the rotary knob found on the side
CHARGING TIMES
| Power| Capacity for batteries (AH)| Current for the charger (A)| Full
charge time (H)| Current for the charger (A)| Full charge time (H)
---|---|---|---|---|---|---
Work lamp
| 30W| 5AH| 1A| 5H| 2A| 2.5H
50W| 10AH| 1A| 10H| 2A| 5H
100W| 15AH| 1A| 15H| 2A| 7.5H
INTENDED USE / APPLICATION
Product designed for the use in households and for other similar general applications.
MOUNTING
Technical changes reserved. Read the manual before mounting. Mounting should be performed by an appropriately qualified person. Any activities to be done with disconnected power supply. Exercise particular caution. Product has a protective contact/terminal. Failure to connect the protective lead may lead to electric shock. Mounting diagram: see pictures. Check for proper mechanical fastening and connection to electrical power prior to first use. The product can be connected to a supply network which meets energy quality standards as prescribed by law. To maintain the proper IP protection level, the right diameter of the power cable should be selected for the cable gland used in the product.
FUNCTIONAL CHARACTERISTICS
Product can be used indoors and outdoors.
USAGE GUIDELINES / MAINTENANCE
Any maintenance work must be performed when the power supply is cut off and the product has cooled down. Clean only with soft and dry cloths. Do not use chemical detergents. Do not cover the product. Ensure free air access. Product may heat up to a higher temperature. Product can only be supplied by rated voltage or voltage within the range provided. It’s forbidden to use the product with damaged protective cover. Product must not be used in unfavourable conditions, e.g. dust, water, moisture, vibrations, explosive air atmosphere, fumes, or chemical fumes, etc. Non-demountable product. Not suitable for independent repairs.
ENVIRONMENTAL PROTECTION
Keep your environment clean. Segregation of post-packaging waste is recommended. This labelling indicates the requirement to selectively collect waste electronic and electrical equipment. Products labelled in this way must not be disposed of in the same way as other waste under the threat of a fine. These products may be harmful to the natural environment and health, and require a special form of recycling/neutralising. Products labelled in this way should be returned to a collection facility for waste electrical and electronic goods. Information on collection centres is provided by local authorities or sellers of such goods. Used items can also be returned to the seller when new product is purchased, in quantity no larger than the purchased item of the same type. The above rules regard the EU area. In the case of other countries, regulations in force in a given country must be applied. Contacting the distributor of our products in a given area is recommended.
COMMENTS / GUIDELINES
Failure to follow these instructions may result in e.g. fire, burns, electrical shock, physical injury and other material and non-material damage. For more information about Hoftronic products visit www.hoftronic.com. Hoftronic shall not be responsible for any damage resulting from the failure to follow these instructions. Hoftronic reserves the right to make changes in the manual – the current version can be downloaded at www.hoftronic.com.
DECLARATION OF CONFORMITY
DOCUMENTATION
This product has been manufactured and supplied in compliance with all
relevant regulations and directives applicable to all member states of the
European Union. The product complies with all applicable regulations and rules
in the country of sale.
Formal documentation such as the declaration of conformity, the safety data
sheet and the product test report is available upon request.
CE DECLARATION
The product complies with the following directives:
- LVD: 2014/35/EU
- EMC: 2014/30/EU
- RoHS : 2011/65/EU
The complete Declaration of Conformity Document (DOC) is available upon request.
Imported by HOF Trading B.V.
Fahrenheitstraat 11, 6003 DC Weert , The Netherlands Made in P.R.C.
www.hoftronic.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>