HOFTRONIC 5422300 Wall Panel 2.4 Ghz User Manual
- June 3, 2024
- HOFTRONIC
Table of Contents
USER MANUAL
WALL PANEL
2.4 GHZ
SKU
5422300
INSTALLATION STEPS
- Turn power on the driver (lights should be already installed in the driver)
- Long press button Zone 1, Zone2 or Zone 3 within 5 seconds after power is turned on. Keep pressing the button zone until the lights are flashing.
- When the lights are flashing, the pairing is succesful.
GROUPING
- Turn power on the driver (lights should be already installed in the driver)
- Long press button Zone 1, Zone2 or Zone 3 within 5 seconds after power is turned on. Keep pressing the button zone until the lights are flashing.
- When the lights are flashing, the pairing is succesful.
- One driver can be connected to max 2 zones, if you have connected the driver to zone 1 and 2, you can control the driver with lights via zone 1 or zone 2. When you turn the power on the driver and hold zone 3, the zone 1 will be disconnected. Now zone 3 is connected to the driver.
BRIGHTNESS SETTING
- Press the brightness + icon to add more brightness of the lights
- Press the brightness – icon to decrease the brightness of the lights It is possible to press 77 times on the brightness icons to adjust the brightness + or –
DISCONNECTING THE WALL PANEL
- Disconnecting the zone is possible by connecting a new zone to the driver. Turn the power on the driver and long press the desired zone button until the lights are flashing.
- This means the driver is now connected to a new zone. If you really want to disconnect the driver from one zone, it is needed to connect the driver to 2 other zones.
Note: The maximum range of the wall panel is 25 meter.
INTENDED USE / APPLICATION
Product designed for the use in households and for other similar general
applications.
MOUNTING
Technical changes reserved. Read the manual before mounting. Mounting should
be performed by an appropriately qualified person. Any activities to be done
with disconnected power supply. Exercise particular caution. Product has a
protective contact/terminal. Failure to connect the protective lead may lead
to electric shock.
Mounting diagram: see pictures. Check for proper mechanical fastening and
connection to electrical power prior to first use. The product can be
connected to a supply network which meets energy quality standards as
prescribed by law. To maintain the proper IP protection level, the right
diameter of the power cable should be selected for the cable gland used in the
product.
FUNCTIONAL CHARACTERISTICS
The product can only be used indoors.
USAGE GUIDELINES / MAINTENANCE
Any maintenance work must be performed when the power supply is cut off and
the product has cooled down. Clean only with soft and dry cloths. Do not use
chemical
detergents. Do not cover the product. Ensure free air access. Product may heat
up to a higher temperature. Product can only be supplied by rated voltage or
voltage
within the range provided. It’s forbidden to use the product with damaged
protectivcover. Product must not be used in unfavourable conditions, e.g.
dust, watermoisture, vibrations, explosive air atmosphere, fumes, or chemical
fumes, etc. Nondemountable product.
Not suitable for independent repairs.
ENVIRONMENTAL PROTECTION
Keep your environment clean. Segregation of post-packaging waste is recommended. This labelling indicates the requirement to selectively collect waste electronic and electrical equipment. Products labelled in this way must not be disposed of in the same way as other waste under the threat of a fine. These products may be harmful to the natural environment and health, and require a special form of recycling/ neutralising. Products labelled in this way should be returned to a collection facility for waste electrical and electronic goods. Information on collection centres is provided by local authorities or sellers of such goods. Used items can also be returned to the seller when new product is purchased, in quantity no larger than the purchased item of the same type. The above rules regard the EU area. In the case of other countries, regulations in force in a given country must be applied. Contacting the distributor of our products in a given area is recommended.
COMMENTS / GUIDELINES
Failure to follow these instructions may result in e.g. fire, burns,
electrical shockphysical injury and other material and non-material damage.
For more information
about Hoftronic products visit www.hoftronic.com.
Hoftronic shall not be responsible for any damage resulting from the failure
to follow these instructions. Hoftronic
reserves the right to make changes in the manual – the current version can be
downloaded at www.hoftronic.com.
DECLARATION OF CONFORMITY
DOCUMENTATION
This product has been manufactured and supplied in compliance with all
relevant regulations and directives applicable to all member states of the
European Union.
The product complies with all applicable regulations and rules in the country
of sale. Formal documentation such as the declaration of conformity, the
safety data sheet and the product test report is available upon request.
CE DECLARATION
The product complies with the following directives:
LVD: 2014/35/EU
EMC: 2014/30/EU
RoHS: 2011/65/EU
The complete Declaration of Conformity Document (DOC) is available upon
request.
Imported by
HOF Trading B.V.
Fahrenheitstraat 11, 6003 DC Weert , The Netherlands
Made in P.R.C.
www.hoftronic.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>