HOFTRONIC 4403645 Memphis LED Wall and Floor Light User Manual

: June 3, 2024
: HOFTRONIC

Table of Contents

4403645 Memphis LED Wall and Floor Light
IMPORTANT SAFETY DETAILS
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

4403645 Memphis LED Wall and Floor Light
User Manual

4403645 Memphis LED Wall and Floor Light

HOFTRONIC 4403645 Memphis LED Wall and Floor Light

IMPORTANT SAFETY DETAILS

Ensure the AC/Mains power is NOT connected and cannot be unexpectedly reconnected during installation.
This product must be installed by a qualified electrician in accordance with instructions provided and in compliance with recognised electrical and safety regulations relevant to the country it is being installed.
This product may NOT be installed by minors or people with a mental disability.
Product has a grounding wire. Failure to connect the protective lead may lead to electric shock.
Any maintenance work must be performed when the power supply is cut off and the product has cooled down.
To maintain the proper IP protection level, the right diameter of the power cable should be selected for the cable gland used in the product.
Clean only with soft and dry cloths. Do not use chemical detergents.
Do not cover the product. Ensure free air access.
Product cannot be fixed if the light source becomes damaged.
Product can only be supplied by rated voltage or voltage within the range provided.
It’s forbidden to use the product with damaged protective cover.
Product must not be used in unfavourable conditions, e.g. dust, water, moisture, vibrations, explosive air atmosphere, fumes, or chemical fumes, etc.
Not suitable for independent repairs.
ATTENTION! Do not look directly at LED light beam.
When installing the Memphis pedestal lamp, provide a drainage of at least 30-40cm around the product so that no water can accumulate under the product.

HOFTRONIC 4403645 Memphis LED Wall and Floor Light -
fig

INTENDED USE / APPLICATION
Product designed for the use in households and for other similar general applications.
MOUNTING
Technical changes reserved. Read the manual before mounting. Mounting shouldbe performed by an appropriately qualified person. Any activities to be done withdisconnected power supply. Exercise particular caution. Product has a protectivecontact/terminal. Failure to connect the protective lead may lead to electric shock.Mounting diagram: see pictures. Check for proper mechanical fastening andconnection to electrical power prior to first use. The product can be connected toa supply network which meets energy quality standards as prescribed by law. Tomaintain the proper IP protection level, the right diameter of the power cable shouldbe selected for the cable gland used in the product.
FUNCTIONAL CHARACTERISTICS
Product can be used indoors and outdoors.
USAGE GUIDELINES / MAINTENANCE
Any maintenance work must be performed when the power supply is cut off and theproduct has cooled down. Clean only with soft and dry cloths. Do not use chemical detergents. Do not cover the product. Ensure free air access. Product may heat up to a higher temperature. Product can only be supplied by rated voltage or voltage within the range provided. It’s forbidden to use the product with damaged protectivecover. Product must not be used in unfavourable conditions, e.g. dust, water,moisture, vibrations, explosive air atmosphere, fumes, or chemical fumes, etc. Nondemountable product. Not suitable for independent repairs.
ENVIRONMENTAL PROTECTION
Keep your environment clean. Segregation of post-packaging waste is recommended. This labelling indicates the requirement to selectively collect waste electronic andelectrical equipment. Products labelled in this way must not be disposed of in the same way as other waste under the threat of a fine. These products may be harmfulto the natural environment and health, and require a special form of recycling/ neutralising. Products labelled in this way should be returned to a collection facility for waste electrical and electronic goods. Information on collection centres is providedby local authorities or sellers of such goods. Used items can also be returned to the seller when new product is purchased, in quantity no larger than the purchased itemof the same type. The above rules regard the EU area. In the case of other countries,regulations in force in a given country must be applied. Contacting the distributor ofour products in a given area is recommended.
COMMENTS / GUIDELINES
Failure to follow these instructions may result in e.g. fire, burns, electrical shockphysical injury and other material and non-material damage. For more informationabout Hoftronic products visit www.hoftronic.com. Hoftronic shall not be responsiblefor any damage resulting from the failure to follow these instructions. Hoftronicreserves the right to make changes in the manual – the current version can bedownloaded at www.hoftronic.com.
DECLARATION OF CONFORMITY
DOCUMENTATION
This product has been manufactured and supplied in compliance with all relevantregulations and directives applicable to all member states of the European Union.The product complies with all applicable regulations and rules in the country of sale.
Formal documentation such as the declaration of conformity, the safety data sheeand the product test report is available upon request.
CE DECLARATION
The product complies with the following directives:
LVD: 2014/35/EU
EMC: 2014/30/EU
RoHS: 2011/65/EU
The complete Declaration of Conformity Document (DOC) is available upon request.