GERMAN POOL HTM-560 Mini Ceramic Fan Heater User Manual
- July 19, 2024
- GERMAN POOL
Table of Contents
GERMAN POOL HTM-560 Mini Ceramic Fan Heater
Please read these instructions and warranty information carefully before use and keep them handy for future reference.
Product Features
- High quality PTC ceramic heating element which adjusts power according to temperature levels; antioxidant nature ensures durability.
- Automatic warm air delivered evenly and gently.
- Human body sensor function, smart operation and energy efficient.
- Quite DC fan.
- Safer operation with tip-over switch and dual overheating protective devices (thermostat and thermal fuse).
- LED is dimmed after 1 minute of inactivity for better energy efficiency and uninterrupted sleep.
- Small and portable size suitable for domestic and office environments.
- Small size and portable design for enhanced mobility.
Safety Precautions
When using electrical appliances, basic precautions should always be followed to reduce the risk of fire, electric shock, and injury to persons, including the following:
-
Read all instructions before using this heater.
-
This heater is hot when in use. To avoid burns, do not let bare skin touch hot surfaces. If provided, use handles when moving this heater. Keep combustible materials, such as furniture, pillows, bedding, papers, clothes, and curtains at least 3 feet (0.9m) from the front of the heater and keep them away from the sides and rear.
-
Extreme caution is necessary when any heater is used by or near children or invalids and whenever the heater is left operating and unattended.
-
Do not operate any heater with a damaged cord or plug or after the heater malfunctions, has been dropped or damaged in any manner. Return heater to authorized service facility for examination, electrical or mechanical adjustment, or repair.
-
Do not use outdoors.
-
This heater is not intended for use in bathrooms, laundry areas and similar indoor locations. Never locate heater where it may fall into a bathtub or other water container.
-
Do not run cord under carpeting. Do not cover cord with throw rugs, runners, or similar coverings. Do not route cord under furniture or appliances. Arrange cord away from traffic area and where it will not be tripped over.
-
This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.
-
Children less than 3 years of age should be kept away unless continuously supervised.
-
Children aged from 3 to 8 years shall only switch on/off the appliance provided that it has been placed or installed in its intended normal operating position and they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.
Children aged from 3 to 8 years shall not plug in, regulate, and clean the appliance or perform user maintenance. -
CAUTION — some parts of this product can become very hot and cause burns. Particular attention has to be given where children and vulnerable people are present.
-
Disconnect from main power source when not in use or cleaning.
-
If the supply cord is damaged, it must be replaced by the manufacturer, its service agent, or similarly qualified persons in order to avoid a hazard.
-
The voltage and frequency of the power supply must comply with the technical specification of the heater. 220-240V~/50Hz
-
Warning: in order to avoid overheating, do not cover the heater.
-
Do not twist the device, to avoid damage on the device.
-
Do not beat or shake the device when the device is turned on.
-
When the device is working, do not touch the wind outlet, to avoid scalding skin.
-
Be sure the wind inlet & outlet are unblocked to avoid any malfunction appearance; such as distortion, changing color, etc.
-
Put the power cord in the right way to avoid stumbling over the power cord.
-
Do not allow the power cord to touch the front net cover to avoid the high temperature from damaging the power cord.
-
Put the device on a flat surface when using. It is strictly prohibited to use the device near or in bathroom, shower or a swimming pool.
-
The device is hot when in operation, Avoid flammable, explosive articles, as well as environments full of inflammable air or dust.
-
A fire may occur if the heater is covered with or touches flammable material, including curtains, drapes, bedding etc. when in operation. KEEP THE HEATER AWAY FROM SUCH MATERIALS.
-
Do not let the power cord hang over the edge of the table or work surface or touch hot surfaces.
-
Do not hang a wet cloth or anything wet above the device, to avoid leakage of electricity.
-
Do not put flammable or cloth on the device, to avoid fire or electric shock.
-
When the device is in operation, please do not place the air outlet and inlet next to the wall or curtain to avoid obstructing the air and influence the heater effect.
-
Do not place the power cord at the wind outlet, it will damage the insulation layer of wires
-
Do not insert conductive objects into air inlet or outlet, to avoid electric shock.
-
Considering the security, when no one is around, turn off the device, to avoid unpredictable accidents.
-
The device is not intended to use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction.
-
Make sure power is off and the plug is disconnected when cleaning or repairing.
-
If not using the device for a long period, please disconnect the plug, put the device into the box and store the device in a dry and ventilated place.
-
Do not attempt to repair, disassemble or modify the device privately when there is some damage on the power cord or something is wrong with the device.
-
Warning: the heater cannot be directly located under the socket.
Product Structure
Main Body
- Front cover
- Power indicator
- Body sensor indicator
- Control panel
- Body sensor detector
- On/Off button
- Body sensor button
- Dust-proof filter
- Back cover
- Power switch
- Tip-over switch
Control Panel
Operating Instructions
Installation
- Take the product out of the packaging box.
- Place the heater on a flat surface as shown in picture 1.
Watch the video clip
Function Keys Instructions
On/off and Standby Key
Connect and turn on electricity, the heater enters standby mode. All indicator
lights are off.
Under standby mode, press the key once to turn on the device. The default
setting after the heater is turned on:
a ) Body sensor mode indicator light is off, heater enters continuous
mode.
b ) PTC heating element starts working.
c ) DC Fan turns on.
During operation, press ****once to turn off the heater (all indicator lights
are off, PTC heating element stops working immediately, DC fan stops working
after 10 seconds).
Switch Mode Key
When the device is on, press ****to turn on/off body sensor mode.
Continuous mode: when turns off body sensor mode, the heater enters continuous
mode. The heater continuously works; PTC heating element and DC fan also work
simultaneously.
Body sensor mode : When this mode is on, body sensor mode operates. 10 seconds later DC Fan will be switched off.
-
Upon switching to the body sensor mode, the PTC heating element keeps operating for the first 2 minutes and the system will continuously detect the presence of human body; if human body is detected within 2 minutes, it keeps functioning while resetting the timer for another 2-minute interval. If human body is not detected, the PTC heating element will stop working after 2 minutes.
10 seconds later the motor will be switched off and stop generating warm air. -
Body sensor mode indicator: the sensor will be on as long as the PTC heating element and fan are working. When human body is absent, they will be switched off and the indicator will keep flashing at 1 Hz.
Note: The machine has no memory function. Every time the heater reboots, by default the PTC heating element is on and the body sensor function is off.
Operating Instructions
Body Sensor Mode Instructions
When the temperature is between 20℃ and 25℃, this mode is effective when a
body is detected within a distance of around 1.8 meters. The sensor is
affected by the temperature of the environment.
The lower the temperature the more sensitive the sensor is and vice versa. The
effective angles are between 60 degrees vertically and 90 degrees
horizontally.
Cleaning and Maintenance
- Before cleaning or maintenance, please unplug the heater and wait for the heater to cool.
- When cleaning the surface of the heater, do it with a wet cloth. Do not use petrol, thinner, diluents or other similar chemical substances. Do not spray at the heater.
- If there is dirt blocking the back cover, the heater performance may be affected. Clean the back cover at least every other month. A wet cloth may be used to wipe the back cover.
- If the heater will not be used for a long period of time, pack the heater properly and store it in a dry and ventilated place.
Technical Specifications
| Model | HTM-560 |
|---|---|
| Voltage | 220-240 V~ |
| Frequency | 50 Hz |
| Power | 600 W |
| Noice | ≤50 dB |
| Dimensions | (H)185mm (W)118mm (D)98.8mm |
| Net Weight | 0.71 kg |
CUSTOMER SUPPORT
Online Warranty Registration 
Specifications are subject
to change without prior notice.
If there is any inconsistency or ambiguity between the English version and the
Chinese version, the Chinese version shall prevail.
Refer to www.germanpool.com for the most up-to-
date version of the Operating Instructions.
© All rights reserved. Copying, reproducing or using the contents of this
manual is not allowed without prior authorization from German Pool, violators
will be prosecuted.
www.germanpool.com
HTM-560-M-18(1.1)
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>