GERMAN POOL RHS Series Chimney Type Range Hood User Manual

GERMAN POOL RHS Series Chimney Type Range Hood

Product Information

Specifications

• Product: Chimney Type Range Hood
• Model: RHS SERIES
• Available Models: 6328, 7328, 8328, 9328, 6428, 7428, 8428, 9428

Product Information

Notice Before Use
For safety purposes, read the instructions carefully before using the appliance for the first time. Save the instructions for future reference. The appliance is designed for domestic use and should be installed and operated according to the provided instructions.

Product Structure

1. Motor cover
2. Body
3. LED Light
4. Control panel
5. Rectification plate (oil collector inside)
6. Main power switch
7. Cut-off switch
8. Thermo-sense auto start device
9. Infrared-sense auto start device

Product Usage Instructions

Installation Instructions

Pre-installation Notice
The range hood must be installed and repaired by authorized qualified technicians. Before installation, plug in and check if all switches are functional.

Installation Environment
For efficient air extraction, avoid opening too many windows surrounding the range hood to prevent air convection. This will ensure cooking fumes rise effectively.

Installation Method
Drill holes in the wall according to the distance between the 2 mounting brackets and the diameter of the 2 holes on the mounting bracket. Install the anchor screws in the holes. Fix the range hood onto the screw and secure with nuts.

Height of Installation
The hood should remain level during installation to prevent oil spillage from oil collectors.

Length of Exhaust Pipe
Connect the opening at the top of the range hood to an exhaust pipe for fume extraction. Use a 5/6 inches diameter exhaust pipe and minimize its length to avoid air turbulence.

Operation Instructions

Important:

1. The exhaust duct must be exposed outdoors.
2. Adequate ventilation is required in the room when using gas cooking ranges or other fuels.
3. Air from the range hood should not be discharged into venting pipes used for other appliances burning gas or fuels.
4. Ensure the electrical rating matches your house’s power supply before switching on.

Control Panel:

• Infrared-sense autostart
• LCD window

FAQ

• Q: Can I install the range hood myself?
  A: It is recommended to have authorized qualified technicians install and repair the range hood for safety and proper functioning.

• Q: What diameter exhaust pipe should I use?
  A: Use a 5/6 inches diameter exhaust pipe for optimal performance.

Please read these instructions and warranty information carefully before use and keep them handy for future reference.

Notice Before Use

Important
For safety purpose, you should read the instructions carefully before using the appliance for the first time. Save the instructions for future reference. The appliance is designed for domestic use and may only be installed and operated in accordance with these instructions for use.

1. The appliance is not intended for the use of, and playing with, by persons (including children) with reduced physical, sensory or mental capabilities, or any individual lack of experience and knowledge unless they have been given supervision or instruction.
2. Keep children away from the appliance. Do not let them use the appliance without supervision.
3. If the power supply cord is damaged, do not operate the appliance. Contact German Pool or a licensed technician for a replacement immediately.
4. Disconnect the power supply before cleaning, repairing or dismantling the range hood.
5. The range hood must be earthed.
6. Connect the range hood with an independent air vent to exhaust lampblack.
7. The air must not be discharged into a venting pipe that is used for exhausting fumes from appliances burning gas or other fuels.
8. The connection opening at the top of the range hood must be connected to the exhaust pipe for exhausting fumes to the outdoors. Exhaust pipe of 5”/6” inches in diameter should be used.
9. The appliance should be positioned 700±50mm above the cooking range.
10. Do not flambe under the range hood.
11. Please wear safety gloves for installation, cleaning, light bulb changing and dismantling in order to prevent injuries.
12. To protect electrical parts, do not splash or spray the range hood with water.
13. German Pool range hood has high venting efficiency. Most of the grease vapor will be exhausted through the air vent when the range hood is in operation. Only very small amount of residual oil will be collected in the Oil Collecting Tray.
14. There should be adequate ventilation in the room when the range hood is used along with appliances that burn gas or other fuels.
15. Regulations concerning the discharge of air have to be fulfilled.
16. To prevent fire hazard in case of oil build-up, the easily soiled parts must be cleaned at least once a week.

Product Structure

1. Motor cover
2. Body
3. LED Light
4. Control panel
5. Rectification plate (oil collector inside)
6. Main power switch
7. Cut-off switch
8. Thermo-sense auto start device
9. Infrared-sense auto-start device

Installation Instructions

Pre-installation Notice
The range hood must be installed and repaired by authorized qualified technicians. Before installation, plug in and check if all switches are functional.

Installation Environment
For efficient air extraction, avoid opening too many windows surrounding range hood for this will cause air convection which prevents cooking fumes from rising to 25 cm (the effective suction/exhaust area).

Installation Method
Drill holes in the wall according to the distance between the 2 mounting brackets and the diameter of the 2 holes on the mounting bracket. Install the anchor screws in the holes. Fix the range hood onto the screw and secure with nuts (Fig A.B.C).

Height of Installation
The appliance should be positioned 700±50mm above the cooking range. A distance that is near 700mm results in higher venting efficiency (Fig D).

Keep the Hood Level
The installation of the hood should remain level, in order to prevent oil from spilling over from oil collectors (Fig E).

Length of Exhaust Pipe
The connection opening at the top of the range hood must be connected to the exhaust pipe for exhausting fumes to the outdoors. An exhaust pipe of 5”/6” inches in diameter should be used. The length of the exhaust pipe should be minimized to avoid air turbulence inside the pipe (Fig F).

Wiring Diagram

Operation Instructions

Important

1. The exhaust duct must be exposed outdoors.
2. There should be adequate ventilation in the room when a gas cooking range or other fuels are in use for cooking.
3. The air from the range hood must not be discharged into a venting pipe that is used for exhausting fumes from appliances burning gas or other fuels.
4. Ensure the electrical rating shown on the rating plate corresponds with the power supply in your house before switching on the power supply.

Control Panel

1. Main Power Switch

   • When it is switched to ON, the range hood is connected with power and at stand-by status. All functions can be activated.
   • When it is switched to OFF, all functions including Heat-Activated auto start, Heater oil removal and Infrared sensor auto start cannot be activated. To activate any functions, it must be switched to ON.

2. Press button / LCD Window

   • Under stand-by status, the red light below the LCD window is always ON.

   • A. Speed

     • Under stand-by status, Press the speed button(Right) to select the fan speed.
       The fan speed remains at the last step, please keep on pressing to the desired speed.

       • Right side of LCD window indicates H- Hight speed.
       • Right side of LCD window indicates M- Medium speed.
       • Right side of LCD window indicates L- Low speed.

     • Long press for 2 seconds display window indicates AH, will activate Heat oil removing for 600 seconds, press the speed button again to stop fan speed.

   • B. LED Light

     • Under stand-by status, Press the LED button (Left) to select the LED brightness, the brightness of LED remains at the last step, please keep on pressing to the desired brightness.
       • Left side of LCD window indicates 1-Low brightness
       • Left side of LCD window indicates 2-Medium brightness
       • Left side of LCD window indicates 3-High brightness
     • Press the button for 2 seconds (keep sound will be heard) to turn off the LED light.

3. Infrared-Sense Auto Start

   • Under stand-by status, when on object close to infrared sensor, the fan will activate at high speed for 60 seconds.

4. Thermo-Sense Auto Start
   Note: Make sure the range hood is at stand-by status thus thermo-sense auto start can operate.

   • When the gas cooking range is working without the fan turned on, and the air temperature under the range hood reaches 55-60°C (130-140°F), thermal sensor will activate the fan to run at medium speed for 45 seconds.
   • If the temperature under the range hood still reaches 55-60°C (130-140°F) after the auto start has completed, the fan will be activated again as described in the step above.
     Note: After the first activation of auto start, you need to press the desired Fan speed H-M-L if you want keep the fan running.

5. Cut-Off Switch

   • The range hood is set up a micro switch (position shown as P.5- NO.7)
   • a. When the rectification plate is opened, the power of range hood will be cut off.
   • b. When the rectification plate is closed, the power of range hood will be connected.

Care & Maintenance

Important

• To ensure the most optimum efficiency, the range hood must be cleaned at least once a week.
• Make sure to wear safety gloves before cleaning or dismantling the metal parts of the range hood in order to reduce the risk of any injury caused by the sharp edges.
• Warning: There is a risk of fire if repair and cleaning of the range hood (especially the fan and other easily soiled parts) are not carried out in accordance with the instructions.

1. Power plug must be disconnected before cleaning and repair.
2. Use soft cloth with mild detergent to clean the surface of the hood from outside and inside each time after use and then clean with a cloth soaked with water. Avoid scraping the surface.
3. Clear oil from oil collectors when they are more than half full of grease in order to avoid spilling. Open the rectification plate, pull and slide the oil collector placed under the fan. Wash and wrap it dry. Then slide and push it back.
4. When open the rectification plate the limited switch will cut off the power.
5. Move the rectification plate to avoid of any damage incurred, if the rectification plate dropped.
6. Hold both sides of the rectification plate and pulls upwards to release the rectification plate.

Troubleshooting

If you encounter the following common troubles, please solve them according to the following instructions. If the problem cannot be solved or a cause cannot be found, please contact our customer services centre.
Note: For safety purpose, do not dismantle the product for repair by yourself.

Technical Specifications

(W) 600 mm

(D) 356 mm

| (H) 295 mm

(W) 700 mm

(D) 356 mm

Net Weight| 10.1 kg| 10.6 kg
Model| RHS-8328| RHS-9328
---|---|---
Voltage / Frequency| 220-240 V ~ 50 Hz| 220-240 V ~ 50 Hz
Power| 220-250 W| 220-250 W
Lighting| 6 W| 6 W
Motor Speed| Max. 2,800 RPM| Max. 2,800 RPM
Exhaust Flow| Max. 900 m³/hr| Max. 900 m³/hr
Exhaust Outlet Diameter| ø125 mm/5”; ø152 mm/6”| ø125 mm/5”; ø152 mm/6”
Product Dimensions (With Motor)| (H) 295 mm

(W) 800 mm

(D) 356 mm

| (H) 295 mm

(W) 900 mm

(D) 356 mm

Net Weight| 11.1kg| 11.8 kg
Model| RHS-6428| RHS-7428
---|---|---
Voltage / Frequency| 220-240 V ~ 50 Hz| 220-240 V ~ 50 Hz
Power| 220-250 W| 220-250 W
Lighting| 6 W| 6 W
Motor Speed| Max. 2,800 RPM| Max. 2,800 RPM
Exhaust Flow| Max. 900 m³/hr| Max. 900 m³/hr
Exhaust Outlet Diameter| ø125 mm/5”; ø152 mm/6”| ø125 mm/5”; ø152 mm/6”
Product Dimensions (With Motor)| (H) 295 mm

(W) 600 mm

(D) 457 mm

| (H) 295 mm

(W) 700 mm

(D) 457 mm

Net Weight| 11.0 kg| 11.8 kg
Model| RHS-8428| RHS-9428
---|---|---
Voltage / Frequency| 220-240 V ~ 50 Hz| 220-240 V ~ 50 Hz
Power| 220-250 W| 220-250 W
Lighting| 6 W| 6 W
Motor Speed| Max. 2,800 RPM| Max. 2,800 RPM
Exhaust Flow| Max. 900 m³/hr| Max. 900 m³/hr
Exhaust Outlet Diameter| ø125 mm/5”; ø152mm/6”| ø125 mm/5”; ø152 mm/6”
Product Dimensions (With Motor)| (H) 295 mm

(W) 800 mm

(D) 457 mm

| (H) 295 mm

(W) 900 mm

(D) 457 mm

Net Weight| 12.6 kg| 13.5 kg

Specifications are subject to change without prior notice.
If there is any inconsistency or ambiguity between the English version and the Chinese version, the Chinese version shall prevail.
Refer to www.germanpool.com for the most up-to- date version of the User Manual.

Warranty Terms & Conditions

Under normal operations, the product will gurantee a 1-year full warranty provided by German Pool (effective from the date of purchase).

This warranty is not valid until customer registration information is received by our Service Centre within 10 days of purchase via one of the following means:

1. Visit our website and register online: www.germanpool.com/warranty.
2. Complete all the fields on the attached Warranty Card and mail it back to our Customer Service Centre.

Please fill out the form below. This information and the original purchase invoice will be required for any repairs. Warranty will be
invalidated if the information provided is found to be inaccurate.

• Serial No.: ____
• Purchased From: ____
• Invoice No.: ____
• Purchase Date: ____

1. Customer who fails to present original purchase invoice will not be eligible for free warranty service.
2. Customer should always follow the operating instructions. This warranty does not apply to:
   • labour costs for on-site installation, check-up, repair, replacement of parts and other transportation costs;
   • damages caused by accidents of any kind (including material transfer and others);
   • operating failures resulting from applying incorrect voltage, improper usage, and unauthorized installations or repairs.
3. This warranty is invalid if:
   • the purchase invoice is modified by an unauthorized party;
   • the product is used for any commercial or industrial purposes;
   • the product is repaired or modified by unauthorized personnel, or unauthorized parts are installed;
   • the serial number is modified, damaged or removed from the product.
4. German Pool will, at its discretion, repair or replace any defective part.
5. This warranty will be void if there is any transfer of ownership from the original purchaser.

Customer Service & Repair Centre

Hong Kong, China
10/F, Kowloon Godown
1-3 Kai Hing Road, Kowloon Bay,
Kowloon, Hong Kong
Tel: +852 2333 6249
Fax: +852 2356 9798
Email: repairs@germanpool.com

Macau, China
3/F, Edificio Industrial Pou Fung,
145 Rua de Francisco Xavier Pereira,
Macau
Tel: +853 2875 2699
Fax: +853 2875 2661

This warranty is valid only in Hong Kong and Macau.

German Pool (Hong Kong) Limi ted

Hong Kong, China
Room 113. Newport Centre Phase II. 116 Ma Tau
Kok Road. Tokwawan. Kowloon. Hong Kong.
Tel: +852 2773 2888
Fax: +852 2765 8215

Mainland China
8th, Xinxiang Road, Wusha Industrial Park,
Daliang, Shunde, Foshan, Guangdong
Tel: +86 757 2980 8308
Fax: +86 757 2980 8318

Macau, China
3/F, Edificio Industrial Pou Fung,
145 Rua de Francisco Xavier Pereira, Macau
Tel: +853 2875 2699
Fax: +853 2875 2661

© All rights reserved. Copying, reproducing or using the contents of this manual is not allowed without prior authorization from German Pool, violators will be prosecuted.

www.germanpool.com

References

• 德國寶German Pool | 家庭電器、廚櫃、傢俬 | 香港十大名牌

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>