ZEBRONICS ZEB-AIO240AW AIO Cooler User Manual
- July 16, 2024
- ZEBRONICS
Table of Contents
ZEBRONICS ZEB-AIO240AW AIO Cooler
Specifications
-
* The form factor of the AIO cooler: 240mm- CPU Socket:
- Supported CPU models
- Intel: LGA 115X / 1200 / 1366 / 1700 / 2011 / 2066
- AMD: FM3 / FM2 / FM1 / AM2 / AM2+ / AM3 / AM3+ / AM4 / AM5
- Fan Specs:
- No. of Cooling Fans Included: 2 x 120mm Fans
- Power Consumption of the Fan : 2.16W
- Rated Watts: 2.16W
- MTBF of the FAN : 30000 hours
- Speed of the Fan : 1800RPM (max)
- Fan Dimensions: 12x12x2.5 cm (WxDxH)
- Type of Fan Connector Used: 4 Pin Fan Connector
- RGB / ARGB Sync Support : ARGB Support
- Fan power Connector and Connector Length: 4-pin power Connector; Female – 50cm | Male – 60cm
- Fan LED Connector and Connector Length: 3-Pin ARGB connector; Female – 56cm | Male – 76 cm
Product Usage Instructions
Mounting the CPU Block:
For LGA 1700 / LGA 1200 / LGA115X models:
- Step 1 : Take the included Intel Mounting Backplate(B), adjust the mounting points according to your motherboard layout, and align it to the rear side of the motherboard.
- For the LGA2011 model: Connect as per the provided instructions.
Connection of AIO Cooler:
Connect the AIO cooler following the provided connection setup diagram or use a fan controller for additional control.
Mounting the AIO Cooler Setup:
- Step 1: Align the Radiator block of the AIO cooler to the mounting points of the Gaming cabinet.
- Step 2: Place the mounting screws on the mounting points of the AIO cooler.
- Step 3: Fasten the mounting screws to the AIO cooler via the cabinet using the required tools. Apply even pressure for optimal placement.
AMD Setup:
- Combining the CPU Mounting brackets:
- Step 1: Align the AMD mounting brackets (D) to the CPU mounting points of the motherboards.
- Step 2: Align the AMD mounting screws(G2) to the motherboard mounting points.
- Step 3: Fasten the AMD mounting screws into the motherboard via\ the AMD mounting plate.
FAQ
- Q: Where can I find warranty information for the ZEB-AIO Cooler?
- A: For warranty policy details, please visit https://zebronics.com/pages/warranty-policy
Thank you for purchasing the ZEBAIO240AW / ZEB-AIO240AB AIO Cooler.
Please read this user manual carefully and keep it for future reference.
Note
- Avoid the usage of this product at high temperature and high humidity environments.
- Avoid the self-disassembly of the products or it results in voiding the product’s Warranty.
- Please wipe the existing thermal compound which is present on the CPU and ins tall the Included thermal compound to obtain the best Cooling efficiency.
To learn more about the Terms and conditions for the warranty policy, please visit
Features
- 240mm AIO Cooler
- 67.96 CFM Fans
- Supported Intel Processors – LGA 115X / 1200 / 1366 / 17XX / 2011 / 2066
- Supported AMD Processors – FM3 / FM2 / FM1 / AM2 / AM2+ / AM3 / AM3+ / AM4 / AM5
- ARGB Sync
- ARGB CPU Block
- 2 x 120mm Fans
Specifications
The form factor of the
AIO cooler : 240mm
CPU Socket
Supported CPU models
Intel : LGA 115X / 1200 / 1366 / 1700 / 2011 / 2066
AMD : FM3 / FM2 / FM1 /
AM2 / AM2+ / AM3 / AM3+ / AM4 / AM5
Fan Specs
No. of Cooling Fans
Included : 2 x 120mm Fans
Power Consumption
of the Fan: 2.16W
Rated Watts: 2.16W
MTBF of the FAN : 30000 hours
Speed of the Fan : 1800RPM (max)
Fan Dimensions : 12x12x2.5 cm (WxDxH)
Type of Fan Connector
Used: 4 Pin Fan Connector RGB / ARGB Sync
Support: ARGB Support
Fan power Connector and Connector Length: 4-pin power
Connector; Female –
50cm | Male – 60cm
Fan LED Connector and
Connector Length
: 3-Pin ARGB connector; Female – 56cm | Male – 76 cm
Pump Specs
Speed of the
Pump: 2500RPM±10%
Rated Voltage of the
Pump: 12V
Rated Current of the
Pump: 0.3A
Power Consumption
of the Pump : 3.6W
Type of Connector
Used : 3 Pin connector
MTBF of the
Pump: 30000 Hours
Tube Length of the
AIO Cooler : 35cm
Type of Pipes
Used: Braided Rubber Pipe
Diameter of the
Pipe: 1.8cm
Noise Level of the
Pump: 30db
CPU Block Power Connector and
Connector Length: 3-Pin Power
Connector;Length-32cm
CPU Block LED Connector and
Connector Length: 3-Pin ARGB
Connector; Female –
48cm | Male – 58cm
Radiator Specs
Material of the Heat
Sink: Aluminium
Material of the Heat
Transfer Pipe : Copper
Dimensions of the
Radiator : 28 x 12 x 3 cm
Dimensions of the
CPU Block : 8.5 x 7.3 x 5.2 cm
Product Weight: 1.15 Kg
Package contents
For INTEL SETUP
Installation instructions
Applying the thermal paste:-
Step1:- Remove the existing Thermal compound which is present on the CPU
Step2:- Apply the included thermal paste on the CPU as per your CPU
requirement
Step3:- Using the included Thermal paste spreader, Spread the applied
thermal paste evenly on the surface of the CPU.
Step4:- Wipe of the excess Thermal compound which is present on the CPU.
Now peel of the protective cover which is present under the conductive plate
of the CPU Block.
MOUNTING THE CPU BLOCK:-
For LGA 1700 / LGA 1200 /LGA115X models:-
Step 1:- Take the included Intel Mounting Backplate(B), Adjust the
mounting points according to your motherboard layout. Now align it to the rear
side of the motherboard.
Step 2:- Align the mounting studs(G3) to the motherboard as shown in the
reference image. Fasten the Mounting studs to the Mounting bracket which is p
l a c e d o n t h e r e a r s i d e o f t h e motherboard.
Step3:- Align the CPU block to the mounting studs(G3) (as shown in the
reference image) .
Step4:- Align the mounting Nuts(G1) to the CPU block (as shown in the
reference image) .
Step 5:- Using the required tools. Fasten the Mounting nuts(G1) along
with the CPU block to the mounting Studs(G3) which is placed on the
motherboard.
For LGA2011 model :-
Step 1:- Take the included Intel Mounting Backplate(B), and adjust the
mounting points according to your motherboard layout.Now align it to the rear
side of the motherboard.
Step2:- Align the CPU block to the motherboard (as shown in the reference
image) .
Step3:- Align the mounting Screws(G4) to the CPU block (as shown in the
reference image) .
Step4:- Using the required tools. Fasten the Mounting screws(G4) along
with the CPU block to the mounting bracket(B) which is placed on the rear side
of the motherboard.
Connection of AIO Cooler
Step 1:- Combine the 4 – pin fan connector of the AIO cooler together and
Plug the combined 4 – pin Fan connector to the System fan header of the
motherboard.
Step 2:- Combine the 3 – pin ARGB fan connector and 3 – pin ARGB CPU
Block connector. Now plug the Combined ARGB connector to the 3 – pin connector
to the ARGB header of the Motherboard.
Step 3 :- Connect the Power connector CPU Block connector to the CPU Fan
Header which is present on the motherboard.
Alternatively, you can connect a fan controller to the connection setup which is provided in the package contents of the AIO cooler. Please follow the below connection diagram to fully utilize the fan controller.
Mounting the AIO Cooler setup.
Step 1:- Align the Radiator block of the AIO cooler to the mounting
points of the Gaming cabinet.
Step 2:- Place the mounting screws on the mounting points of the AIO
cooler.
Step3:- by using the required tools, Fasten the mounting screws to the
AIO cooler via the cabinet. Ensure to apply pressure evenly for optimal
placement
Note: The Image is for mounting reference only
For AMD SETUP
Combining the CPU Mounting brackets:-
Step 1:- Align the AMD mounting brackets (D) To the CPU mounting points
of the motherboards.
Step 2:- Align the AMD mounting screws(G2). To the mounting points of the
motherboard.
Step3:- Using the required tools, Fasten the AMD mounting screws into the
mounting points of the motherboard via the AMD mounting plate (as shown in the
Reference image).
Applying the thermal paste:-
Step1:- Remove the existing Thermal compound that is present on the CPU
Step 2:- Apply the included thermal paste on the CPU as per your CPU
requirement.
Step3:- Using the included Thermal paste spreader, Spread the applied
thermal paste evenly on the surface of the CPU.
Step4:- Wipe of the excess Thermal compound which is present on the CPU.
Now peel of the protective cover which is present under the conductive plate of the CPU Block
Mounting CPU Block:-
Step 1:- Align the intel screw stud to the mounting points of the AMD
Mounting Bracket and fasten the mounting stud to the mounting points of the
AMD bracket.
Step 2:- Align the CPU block to the Intel screw studs. Now place the CPU
block onthe CPU via the mounting studs.
Step3:- Now align the Intel mounting Nuts to the Intel screw Stud and
Fasten them with even pressure until the CPU block is intact
Connection of AIO Cooler
Step 1:- Combine the 4–pin fan connector of the AIO cooler together and
Plug the combined 4 – pin Fan connector to the System fan header of the
motherboard.
Step 2:- Combine the 3–pin ARGB fan connector and 3 – pin ARGB CPU Block
connector. Now plug the Combined ARGB connector to the 3 – pin connector to
the ARGB header of the Motherboard.
Step 3 :- Connect the Power connector CPU Block connector to the CPU Fan Header which is present on the motherboard.
Alternatively, you can connect a fan controller to the connection setup which is provided in the package contents of the AIO cooler. Please follow the below connection diagram to fully utilize the fan controller.
Mounting the AIO Cooler setup.
Step 1:- Align the Radiator block of the AIO cooler to the mounting
points of the Gaming cabinet.
Step 2:- Place the mounting screws on the mounting points of the AIO
cooler.
Step3:- by using the required tools, Fasten the mounting screws to the
AIO cooler via the cabinet. Ensure to apply pressure evenly for optimal
placement
Note : The Image is for mounting reference only Please use a compatible
gaming cabinet to mount the AIO cooler.
We suggest you to visit our Below link to buy the optimal Gaming chassis for
your AIO Cooler.
https://zebronics.com/collections/premium-gaming-chassis
ISO 9001:2015 Certified Company
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>