rizoma PT569 Kit Porta Targa Fox User Manual

rizoma PT569 Kit Porta Targa Fox

Product Information

Specifications:

• Product Name: Rizoma License Plate Holder
• Model Number: PT569
• Compatibility: Universal
• Difficulty Level: Simple
• Mounting Time: 20-25 minutes

Product Usage Instructions

• Installation:

1. Carefully unpack the product and identify all components.
2. Choose the appropriate plate size option for your license plate (small, medium, or large).
3. Follow the steps below for installation:

• For Medium/Large License Plate:
  Install the plate holder using Part Number PT569.

• For Small License Plate:
  Install the plate holder for small plates using Part Number PT569.

• Universal License Plate Installation:
  Install the universal license plate holder using Part Number PT569.

• Positioning Pin Installation:
  Install the positioning pin for proper alignment using Part Number PT569.

• Final License Plate Installation:
  Securely install the license plate on the holder.

• Maintenance:
  Regularly inspect your Rizoma product for any signs of damage such as leaks, bends, cracks, or wear. If any issues are found, contact a Rizoma dealer for inspection and replacement.

Frequently Asked Questions (FAQ):

• Q: Are Rizoma products compatible with all motorcycles?
  A: Rizoma products may not be compatible with all motorcycles or aftermarket accessories. It is recommended to consult a Rizoma dealer for compatibility.

• Q: How often should I inspect my Rizoma products?
  A: It is advised to periodically inspect your Rizoma products, especially after long trips or extended periods of non-use. Regular maintenance is key to ensuring product functionality and safety.

Before you start

We are pleased to welcome you into the world of RIZOMA, and we congratulate you for your excellent choice. Please carefully follow the instructions in this guide, which will allow you to mount and use the product correctly and enjoy all the features it has. For your protection and safety, RIZOMA expressly recommends that you have the installation of the product performed by skilled personnel. Improper installation, repair or maintenance, can cause accidents. Keep this user guide as a reference for the future. RIZOMA accepts no liability for any damage, of any kind, which may be caused, directly or indirectly, to persons or things as a result of incorrect assembly or failure to observe all the assembly instructions. We also invite you to comply with the provisions of the Highway Code and Traffic rules and/or to additional regulations in force in your Country.

General conditions

Attention:
This component comes assembled for shipping purposes only. Tighten all fasteners to appropriate torque specifications before riding.

Descriptions preceded by this symbol contain information, instructions, or procedures, which, if not followed, may result in death or serious injury.

1. Carefully read, understand, and follow these instructions, they are an essential part of the product. If you have any doubt whatsoever regarding the installation or use of your RIZOMA product, please see your authorized RIZOMA dealer for assistance (on www.rizoma.com).
2.  For correct installation, all tightening has to be done after the correct positioning of the accessories without restricting the moving parts, to not compromise the correct functioning of the product.
3. After installing any Rizoma product, please check that all related components of the motorbike function e.g. brakes, throttle, clutch, lights, and steering. We strongly suggest repeating these checks periodically, especially after long trips or prolonged periods of not using the bike.
   • Your RIZOMA products require regular inspection and maintenance. The more you ride the more often you must inspect your RIZOMA products. If your products are leaking, bent, deformed, cracked, chipped, or worn, no matter how slight, immediately have a RIZOMA dealer inspect the products before you ride again. In any case, never try to repair or modify the Rizoma products or their components, always replace them with Rizoma original components.
   • Rizoma products may not be compatible with your motorcycle or with other aftermarket equipment installed before. For your safety, Rizoma suggests always contacting your RIZOMA dealer.
   • O.E.M.: original equipment manufacturer.

Overview

PART NUMBER
PT569

• To comply with the TÜV and European Norm in force, the installation of the license plate must be carried out as per the enclosed instructions.
• Consult the website www.rizoma.com, in the license plate support section, click “MEDIA” to download the PDF document approval ABE.

License Plate Assembly

PART NUMBER
PT569

Before you start mounting the product please check the completeness of the kit on the part list. The difficulty level and the time of assemblage shown do not include the removal of OEM components.

Warning:
Make sure that your motorbike is standing firmly before you start work, as a fall may lead to damage to the motorbike or injury to you or others, also make sure that the temperature of the exhausts and the engine are similar to the ambient temperature.

WARNING:
TO CLEAN YOUR LICENSE PLATE DON’T USE DETERGENT, AGGRESSIVE PRODUCTS, OR ABRASIVE SPONGES THAT CAN DAMAGE OR SCRATCH YOUR LICENSE PLATE, BUT USE ONLY NEUTRAL DETERGENT WITH COLD WATER.

Improper installation could damage the electrical system of the motorcycle and cause a fire, resulting in personal injury or death. Electrical shock hazard. Disconnect the battery before starting to install the turn license plate bracket rear light or turn signals. The pins must always be isolated and respect the polarity in the connections. The warranty is not valid for any electric wire cutting or any product modification or tampering.

Step 1
INSTALL PLATE FOR MEDIUM/LARGE LICENSE PLATE

Step 2
INSTALL PLATE FOR SMALL LICENSE PLATE

Step 3
INSTALL UNIVERSAL LICENSE PLATE

Step 4
INSTALL PIN OF POSITIONING

WARNING:
INSERT THE PIN OF POSITIONING THE LICENSE PLATE FOLLOW THE EUROPEAN NORM IN FORCE.

Step 5
INSTALL LICENSE PLATE

Step 6
INSTALL TURN SIGNALS

Step 7
INSTALL BRACKET

Step 8
INSERT WIRING

Step 9
INSTALL BUSHINGS AND RUBBERS

Step 10
INSTALL LICENSE PLATE

Warning:
before fixing the license plate to the chassis insert the wiring. Take care not to pinch the wirings.

Step 11
ADJUSTMENT REFLECTOR MEDIUM/LARGE LICENSE PLATE

Warning:
Adjust the distance between the license plate and the rear wheel to avoid contact between them, during the maximum stroke of rear suspension.

Step 12
ADJUSTMENT REFLECTOR SMALL LICENSE PLATE

Warning:
Adjust the distance between the license plate and the rear wheel to avoid contact between them, during the maximum stroke of rear suspension.

Step 13
CONNECTIONS

• Warning: Control that the battery is disconnected.
• Warning: For correct operation of the license plate light, follow these instructions: respect the polarity in the connections and always check that the connectors are isolated.

Warnings

• RIZOMA reserves the right, in its sole discretion, to make changes to the product and this information at any time and without prior notice. Although many catalogs and advertisements depict riders engaged in extreme or stunt riding, this activity is extremely dangerous, increases the risk of an accident, and increases the severity of any injury.
• The action depicted is performed by professionals under strictly controlled riding conditions.
• Only you know the limits of your riding ability and only you can control the conditions under which you ride. By and in consideration for his/her purchase and use of the RIZOMA product, the user expressly recognizes and agrees that in the event of any claim arising out of the use of this RIZOMA product, whether such claim is based on contract, warranty, tort (personal injury or wrongful death) or otherwise, the laws of the Republic of Italy shall apply and jurisdiction and venue for any such action shall be in the Courts of Busto Arsizio, Italy.
• All riders are strongly urged to take a motorcycle rider safety clinic. Always wear a properly fitted and fastened motorcycle helmet (RIZOMA recommends a full-face helmet), that has been approved by ANSI, SNELL, CE, or any other relevant authority, and any other safety equipment necessary for your riding styles, such as full finger gloves, boots, and body armor.
• Be sure to read and follow all the instructions and warnings that originally accompanied your motorcycle, as well as the literature that accompanied any other parts installed on your motorcycle.
• Be sure that your tires are inflated to the correct pressure and that there is no damage whatsoever in the tread or sidewall of the tire.

Legal notes

• Some of our products may not be approved for road circulation in the countries where homologation is required.
• Thus RIZOMA® srl declines any responsibility for a different use of its products.

www.rizoma.com.

References

• Home - Rizoma

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>